#!/usr/bin/env bash
# vision-manager — start/stop the mangalord-vision (llama.cpp) container by
# name according to the analysis backlog in Postgres.
#
# Why this exists: llama-server has no idle-unload and pins ~4.4 GiB. On the
# 8 GiB box vision must only run while there is analysis work. This sidecar is
# the SINGLE owner of the vision lifecycle and the only component with Docker
# access (scoped through docker-socket-proxy) — the internet-facing backend
# never gets the socket. See VISION-AUTOSCALE.md.
#
# It is deliberately dumb: a poll loop with psql + curl + docker. No web
# surface, no state beyond an in-memory idle timer. If it dies, vision keeps
# running (harmless RAM); a MAX_UPTIME backstop bounds that.
set -euo pipefail

# ---- Config (all overridable via env) --------------------------------------
: "${DATABASE_URL:?DATABASE_URL must be set (use the read-only vision_manager role)}"
VISION_CONTAINER="${VISION_CONTAINER:-mangalord-vision}"
VISION_HEALTH_URL="${VISION_HEALTH_URL:-http://mangalord-vision:8000/health}"
# DOCKER_HOST points at the scoped docker-socket-proxy by default.
export DOCKER_HOST="${DOCKER_HOST:-tcp://docker-socket-proxy:2375}"

POLL_INTERVAL="${POLL_INTERVAL:-20}"        # seconds between backlog checks
STOP_DEBOUNCE="${STOP_DEBOUNCE:-600}"       # idle seconds before stopping vision
START_HEALTH_TIMEOUT="${START_HEALTH_TIMEOUT:-300}"  # max wait for /health 200
HEALTH_POLL_INTERVAL="${HEALTH_POLL_INTERVAL:-5}"    # poll cadence while warming
HEALTH_TIMEOUT="${HEALTH_TIMEOUT:-5}"                # per-probe curl timeout, seconds
MAX_UPTIME="${MAX_UPTIME:-0}"               # >0: force-stop after N idle-or-not seconds running (backstop); 0 disables
# When >0, refuse to start vision while a crawl is running (Chromium + vision
# together OOM the 8 GiB box). Set to 0 on roomier hosts.
RESPECT_CRAWL_MUTEX="${RESPECT_CRAWL_MUTEX:-1}"

# ---- Memory-pressure yield (see VISION-MEMORY-YIELD.md) --------------------
# Dynamic generalization of the crawl mutex: stop a RUNNING vision when the
# HOST is actually short on RAM, so a transient spike elsewhere (a crawl, CI,
# a backend burst) can finish instead of the kernel OOM-killer shooting
# something stateful. Uses host-wide MemAvailable from /proc/meminfo.
MEM_YIELD_ENABLED="${MEM_YIELD_ENABLED:-1}"             # 0 disables the whole gate
MEM_HIGH_WATERMARK_PCT="${MEM_HIGH_WATERMARK_PCT:-92}"  # used% >= → active-stop a running vision
MEM_LOW_WATERMARK_PCT="${MEM_LOW_WATERMARK_PCT:-80}"    # used% >= → inhibit starts (hysteresis)
MEM_YIELD_COOLDOWN="${MEM_YIELD_COOLDOWN:-300}"         # s after a pressure-stop before restart allowed
MEM_POLL_INTERVAL="${MEM_POLL_INTERVAL:-5}"             # mem sub-poll cadence, <= POLL_INTERVAL

PSQL=(psql "$DATABASE_URL" -At -v ON_ERROR_STOP=1)

log() { echo "[vision-manager] $(date -u +%FT%TZ) $*" >&2; }

# ---- Queries ---------------------------------------------------------------
# Pending analysis work: pending OR currently-leased analyze_page jobs. Note
# the queue column is `state` (not `status`) and the kind lives in the JSONB
# payload — see backend/migrations/0012_crawler.sql.
pending_analysis() {
  "${PSQL[@]}" -c \
    "SELECT count(*) FROM crawler_jobs
      WHERE payload->>'kind' = 'analyze_page'
        AND state IN ('pending','running');" 2>/dev/null || echo "ERR"
}

# A crawl is in-flight if any non-analyze job is currently running.
crawl_running() {
  "${PSQL[@]}" -c \
    "SELECT count(*) FROM crawler_jobs
      WHERE payload->>'kind' <> 'analyze_page'
        AND state = 'running';" 2>/dev/null || echo "ERR"
}

# Is the analysis subsystem enabled in Admin → Settings? The runtime source of
# truth is the `app_settings` row (key='analysis'), NOT the .env seed. When
# analysis is OFF the worker drains nothing, so leftover pending jobs would
# otherwise keep vision pinned forever — we must gate on this too, not just the
# queue depth. Returns the literal 'true'/'false'; 'ERR' (or anything else) on
# query failure is treated as enabled by the caller (fail-open: never yank
# vision out from under a live analysis on a transient DB hiccup).
analysis_enabled() {
  "${PSQL[@]}" -c \
    "SELECT CASE WHEN COALESCE((value->>'enabled')::boolean, false)
                 THEN 'true' ELSE 'false' END
       FROM app_settings WHERE key = 'analysis';" 2>/dev/null || echo "ERR"
}

# ---- Memory pressure -------------------------------------------------------
# Host-wide used% from MemAvailable (NOT MemFree, which sits near "full" thanks
# to page cache and would false-trigger constantly). /proc/meminfo in this
# container reports HOST totals (it is not namespaced under this kernel).
# Emits the "ERR" sentinel on a malformed read so callers can ignore it.
read_mem_used_pct() {
  # Require BOTH fields: a partial read, or a pre-3.14 kernel without
  # MemAvailable, would otherwise leave `a` at 0 → used=100% → a false stop.
  awk '/^MemTotal:/{t=$2} /^MemAvailable:/{a=$2}
       END { if (t>0 && a!="") printf "%d", 100*(1-a/t); else print "ERR" }' /proc/meminfo
}

# ---- Docker helpers --------------------------------------------------------
# `docker inspect .State.Running` → true/false. Disambiguate "container
# absent" (legitimate not-running) from "inspect failed" (transient
# docker-socket-proxy hiccup) so the loop can skip a tick instead of
# resetting timers as if vision had just been stopped — without this
# distinction, an inspect blip every poll resets `up_for` and defeats
# MAX_UPTIME entirely.
vision_running() {
  local out rc
  out="$(docker inspect -f '{{.State.Running}}' "$VISION_CONTAINER" 2>&1)"
  rc=$?
  if [ "$rc" -eq 0 ]; then
    # `true` or `false`. Echo as-is.
    echo "$out"
  elif echo "$out" | grep -qE 'No such container|No such object|not found'; then
    # Container is intentionally not defined yet. Treat as not-running.
    echo "false"
  else
    # Transient docker / socket-proxy error. Mirror the psql callers'
    # `ERR` sentinel; the loop short-circuits the tick on this.
    echo "ERR"
  fi
}

vision_ready() {
  curl -fsS -m "$HEALTH_TIMEOUT" -o /dev/null "$VISION_HEALTH_URL" 2>/dev/null
}

start_vision() {
  log "starting $VISION_CONTAINER"
  # Idempotent: starting an already-running container is a docker no-op.
  if ! docker start "$VISION_CONTAINER" >/dev/null 2>&1; then
    log "ERROR: docker start failed (is $VISION_CONTAINER defined on this host?)"
    return 1
  fi
  local waited=0
  while ! vision_ready; do
    if [ "$waited" -ge "$START_HEALTH_TIMEOUT" ]; then
      # Previously: log a warning and leave the container up. That made
      # the wedge permanent — next loop tick sees running=true, the
      # pending>0 branch falls through to `crawl_deferred=0` without
      # retrying start, and `idle_for` never accumulates because
      # `pending>0` resets it. The container stays running forever
      # without ever answering /health.
      #
      # Stop it explicitly: a fresh `docker start` next tick takes the
      # cold-load hit again but at least produces a clean state. If the
      # wedge is persistent the operator sees a start/stop loop in the
      # log instead of a silent hang.
      log "WARNING: $VISION_CONTAINER not healthy after ${START_HEALTH_TIMEOUT}s; stopping so next tick can retry from a clean state"
      stop_vision "unhealthy after ${START_HEALTH_TIMEOUT}s start probe" || true
      return 1
    fi
    sleep "$HEALTH_POLL_INTERVAL"
    waited=$((waited + HEALTH_POLL_INTERVAL))
  done
  log "$VISION_CONTAINER healthy after ~${waited}s"
}

stop_vision() {
  local reason="${1:-idle ${STOP_DEBOUNCE}s}"
  log "stopping $VISION_CONTAINER ($reason)"
  if docker stop "$VISION_CONTAINER" >/dev/null 2>&1; then
    return 0
  fi
  log "WARNING: docker stop failed; will retry next tick"
  return 1
}

# ---- Memory-yield gates ----------------------------------------------------
# Active stop: when the host is over the HIGH watermark and vision is running,
# SIGTERM it (the friendly, right-victim alternative to an OOM kill) and arm a
# cooldown. Cheap on the hot path — only inspects docker once used% is already
# over the mark. Reads `mem_yield_until`/`idle_for`/`up_for` from the loop scope.
#
# Symmetric ERR handling with the main loop's `running` refresh: an inspect
# blip under genuine memory pressure must NOT silently no-op the SIGTERM.
# When `vision_running` returns `ERR`, log it and skip THIS check rather than
# treating the ambiguous state as "not running" (which would let memory
# pressure go un-yielded until the next tick).
mem_check_and_stop() {
  [ "$MEM_YIELD_ENABLED" = "0" ] && return 0
  local used; used="$(read_mem_used_pct)"
  case "$used" in ''|*[!0-9]*) return 0 ;; esac   # ignore a malformed read
  [ "$used" -lt "$MEM_HIGH_WATERMARK_PCT" ] && return 0
  local vr; vr="$(vision_running)"
  case "$vr" in
    ERR)
      if [ "${mem_check_err_logged:-0}" != "1" ]; then
        log "WARNING: memory-yield wanted to stop vision (used ${used}% >= ${MEM_HIGH_WATERMARK_PCT}%), but vision_running returned ERR — deferring to next tick"
        mem_check_err_logged=1
      fi
      return 0
      ;;
    true)
      mem_check_err_logged=0
      if stop_vision "memory-yield: used ${used}% >= ${MEM_HIGH_WATERMARK_PCT}% high watermark"; then
        mem_yield_until=$(( $(date +%s) + MEM_YIELD_COOLDOWN ))
        idle_for=0
        up_for=0
      fi
      ;;
    *)
      # Not running — nothing to yield from. Cheap no-op.
      mem_check_err_logged=0
      ;;
  esac
}

# Refresh the cached vision_running after `mem_check_and_stop` may have
# stopped the container. Sets the global `REFRESH_RUNNING_RESULT` to the
# new running value (the literal `ERR` sentinel when docker inspect
# fails) so the caller can short-circuit the tick instead of falling
# through into branches whose `[ "$running" = "true" ]` test would treat
# ERR as "stopped" (and then reset `up_for=0`, defeating MAX_UPTIME).
# Logs the underlying error only on TRANSITION via the loop-scope
# `inspect_err_logged` flag so a long-running docker-socket-proxy outage
# doesn't flood the log.
#
# We set a global instead of echoing because the test harness drives
# this via direct call (not `$()` subshell); preserving the loop-scope
# log-on-flip flag requires staying in the caller's shell. Production
# also avoids the subshell hop, which is a small perf win on every tick.
#
# Extracted from inline so test_manager.sh can drive each branch with
# stubbed `docker` on PATH without entering the production loop.
refresh_running_after_mem_check() {
  local r
  r="$(vision_running)"
  if [ "$r" = "ERR" ]; then
    if [ "${inspect_err_logged:-0}" != "1" ]; then
      log "WARNING: docker inspect failed after mem_check_and_stop; will retry next tick"
      inspect_err_logged=1
    fi
  else
    inspect_err_logged=0
  fi
  REFRESH_RUNNING_RESULT="$r"
}

# Start inhibit: echo 1 while a cooldown is in effect OR used% is at/above the
# LOW watermark. The two distinct watermarks give the mandatory hysteresis; the
# cooldown gives whatever needed the RAM room to finish before vision restarts.
mem_yield_active() {
  [ "$MEM_YIELD_ENABLED" = "0" ] && { echo 0; return; }
  [ "$(date +%s)" -lt "$mem_yield_until" ] && { echo 1; return; }
  local used; used="$(read_mem_used_pct)"
  case "$used" in ''|*[!0-9]*) echo 0; return ;; esac
  if [ "$used" -ge "$MEM_LOW_WATERMARK_PCT" ]; then echo 1; else echo 0; fi
}

# ---- Main loop -------------------------------------------------------------
log "started: container=$VISION_CONTAINER health=$VISION_HEALTH_URL poll=${POLL_INTERVAL}s debounce=${STOP_DEBOUNCE}s docker_host=$DOCKER_HOST mem_yield=$([ "$MEM_YIELD_ENABLED" = 0 ] && echo off || echo "${MEM_LOW_WATERMARK_PCT}/${MEM_HIGH_WATERMARK_PCT}% cooldown=${MEM_YIELD_COOLDOWN}s mempoll=${MEM_POLL_INTERVAL}s")"

idle_for=0        # seconds the queue has been empty while vision is running
up_for=0          # seconds vision has been running (for MAX_UPTIME backstop)
crawl_deferred=0  # 1 while a start is held off by the crawl mutex (log on flip only)
analysis_off=0    # 1 while analysis is disabled in settings (log on flip only)
mem_yield_until=0 # epoch deadline of the active memory-yield cooldown (0 = none)
mem_inhibited=0   # 1 while starts are inhibited by memory pressure (log on flip only)
inspect_err_logged=0  # 1 once a docker inspect ERR has been warned about (log on flip only)
mem_check_err_logged=0  # 1 once mem_check_and_stop has deferred on ERR (log on flip only)

# Tests source this script with `MANAGER_TEST_NO_MAIN=1` set so they can
# exercise the helper functions above with stubbed `docker`/`psql` on PATH
# without entering the production poll loop. Production callers (and the
# Dockerfile entrypoint) leave the var unset, so the loop runs as before.
if [ -n "${MANAGER_TEST_NO_MAIN:-}" ]; then
  return 0 2>/dev/null || exit 0
fi

while true; do
  pending="$(pending_analysis)"
  running="$(vision_running)"

  # Treat anything non-numeric (the "ERR" sentinel, or a stray psql notice on
  # stdout) as "query failed" — never feed it to `-gt`, which under
  # `set -e` would otherwise exit-2 and kill the loop.
  case "$pending" in
    ''|*[!0-9]*)
      log "WARNING: backlog query failed (got '${pending}'); will retry next tick"
      sleep "$POLL_INTERVAL"
      continue
      ;;
  esac

  # Same treatment for the docker-inspect status. Without this, a transient
  # docker-socket-proxy hiccup would mis-classify a running vision as stopped
  # — every poll under load would reset `up_for`/`idle_for` and defeat
  # MAX_UPTIME and the idle debounce both. Skip the tick and try again.
  if [ "$running" = "ERR" ]; then
    log "WARNING: docker inspect failed; will retry next tick"
    sleep "$POLL_INTERVAL"
    continue
  fi

  # Gate on the runtime enable flag. If analysis is OFF, force the backlog to 0
  # so the normal idle path runs the STOP_DEBOUNCE timer and shuts vision down.
  # We deliberately reuse the idle debounce (rather than stopping instantly) so
  # a quick toggle off→on inside the debounce window keeps vision warm — no
  # cold reload for a momentary flip. Fail-open: only a literal 'false' counts
  # as disabled; 'ERR'/empty leaves the real queue depth in effect.
  if [ "$(analysis_enabled)" = "false" ]; then
    if [ "$analysis_off" != "1" ]; then
      log "analysis disabled in settings — ignoring ${pending} queued job(s); idle timer will stop vision"
      analysis_off=1
    fi
    pending=0
  else
    analysis_off=0
  fi

  # Memory-yield: two SEPARATE levers, never conflated.
  #   - active stop (HIGH watermark): mem_check_and_stop SIGTERMs a RUNNING
  #     vision when the host is critically short — the ONLY thing that stops a
  #     vision that is actively working.
  #   - start block (LOW watermark / cooldown): holds off STARTING a stopped
  #     vision when memory is already tight, via the mem_block_start flag.
  #     It must NOT zero `pending`: doing so made the idle-debounce path read
  #     "no work" and idle-stop a vision mid-analysis once the box floated past
  #     LOW (idle stack + LLM ≈ 80% here). LOW is a START gate, not a stop
  #     threshold.
  mem_check_and_stop
  refresh_running_after_mem_check
  running="$REFRESH_RUNNING_RESULT"
  if [ "$running" = "ERR" ]; then
    sleep "$POLL_INTERVAL"
    continue
  fi
  mem_block_start=0
  if [ "$(mem_yield_active)" = "1" ]; then
    mem_block_start=1
    if [ "$mem_inhibited" != "1" ]; then
      log "memory-yield: blocking vision START (used >= ${MEM_LOW_WATERMARK_PCT}% or cooldown); a running vision keeps working until the ${MEM_HIGH_WATERMARK_PCT}% active stop"
      mem_inhibited=1
    fi
  elif [ "$mem_inhibited" = "1" ]; then
    log "memory-yield: pressure cleared — start block lifted"
    mem_inhibited=0
  fi

  if [ "$running" = "true" ]; then
    up_for=$((up_for + POLL_INTERVAL))
  else
    up_for=0
  fi

  if [ "$pending" -gt 0 ]; then
    idle_for=0
    if [ "$running" != "true" ]; then
      if [ "$mem_block_start" = "1" ]; then
        # Memory pressure / cooldown — hold off STARTING (flip already logged).
        # A RUNNING vision never reaches here; idle_for stayed 0 above because
        # pending>0, so a working vision is never idle-stopped under pressure.
        :
      elif [ "$RESPECT_CRAWL_MUTEX" != "0" ] && {
             cr="$(crawl_running)"
             # Numeric guard for symmetry with analysis_enabled() (which
             # fail-OPENs on ERR — see line 74). Without this, a psql
             # blip falls through to the != "0" branch and we log the
             # misleading "RAM mutex" line on every tick of the outage.
             case "$cr" in
               ''|*[!0-9]*)
                 if [ "$crawl_deferred" != "1" ]; then
                   log "WARNING: crawl_running query failed (got '${cr}') — deferring start until next clean read"
                   crawl_deferred=1
                 fi
                 true
                 ;;
               *) [ "$cr" != "0" ] ;;
             esac
           }; then
        # Log once per deferral episode, not every poll, so a long crawl
        # doesn't flood the log.
        if [ "$crawl_deferred" != "1" ]; then
          log "deferring start: $pending analysis job(s) pending but a crawl is running (RAM mutex)"
          crawl_deferred=1
        fi
      else
        crawl_deferred=0
        start_vision || true
      fi
    else
      crawl_deferred=0
    fi
  else
    crawl_deferred=0
    # No work. Debounce the stop so bursty enqueues don't thrash the load
    # cycle, and own the stop on our OWN timer (never wait for a backend
    # "drained" signal — leak safety).
    if [ "$running" = "true" ]; then
      idle_for=$((idle_for + POLL_INTERVAL))
      if [ "$idle_for" -ge "$STOP_DEBOUNCE" ]; then
        # Only reset the timers if the stop actually took; otherwise let them
        # keep counting so we retry on the next tick rather than waiting out
        # another full debounce window.
        if stop_vision; then
          idle_for=0
          up_for=0
        fi
      fi
    else
      idle_for=0
    fi
  fi

  # Backstop: bound how long vision can stay up regardless of debounce state.
  if [ "$MAX_UPTIME" -gt 0 ] && [ "$running" = "true" ] && [ "$up_for" -ge "$MAX_UPTIME" ]; then
    if stop_vision "MAX_UPTIME ${MAX_UPTIME}s reached"; then
      idle_for=0
      up_for=0
    fi
  fi

  # Sleep until the next backlog poll, but re-check memory pressure on the
  # faster MEM_POLL_INTERVAL sub-cadence so a spike between backlog ticks can
  # trigger an active stop before the kernel OOM-killer does. Degenerates to a
  # single sleep when MEM_POLL_INTERVAL >= POLL_INTERVAL.
  slept=0
  while [ "$slept" -lt "$POLL_INTERVAL" ]; do
    step="$MEM_POLL_INTERVAL"
    remaining=$((POLL_INTERVAL - slept))
    [ "$step" -gt "$remaining" ] && step="$remaining"
    [ "$step" -lt 1 ] && step=1
    sleep "$step"
    slept=$((slept + step))
    mem_check_and_stop
  done
done