From eb32e1277aadd00511dc420e4ba501cd3d4f7da2 Mon Sep 17 00:00:00 2001 From: sylph-decoder Date: Wed, 2 Sep 2026 20:07:53 +0000 Subject: [PATCH] handoff: F5 -- A cuts the plate to final; clock:"shared" refuted Co-Authored-By: Claude Opus 5 Claude-Session: https://claude.ai/code/session_01Jc4pciRArGHfxGGhEbwp5t --- docs/port/HANDOFF.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/docs/port/HANDOFF.md b/docs/port/HANDOFF.md index 18548190..f55105e5 100644 --- a/docs/port/HANDOFF.md +++ b/docs/port/HANDOFF.md @@ -6084,3 +6084,30 @@ too fast. identified by position only, and lands at `t≈137` where the declared plate is `t≈236`. Unit 9's onset *fraction* is measured against it and inherits that doubt. The `t=70`/`t=100` numbers above are declared and do not. + +## F5 — Ⓐ **snaps** the plate, and does **not** advance the artwork (`0a2ff9f`) + +`docs/re/f5-a-press-snaps-the-plate.md`. Three captures, one press and two +no-press controls, aligned by the sweep's position rather than frame number. + +**Plate alpha from its first draw:** + +| no input | **23 · 46 · 69 · 92 · 115 · 139 · …** ~11 frames of ramp | +|---|---| +| **Ⓐ during build-in** | **255 — one frame, nothing before it** | + +Zero intermediate values against eleven: it is a **cut**, not an acceleration. +Implement Ⓐ as "plate to final pose", not as a rate multiplier. + +🔴 **`clock: "shared"` is refuted, on F4's own discriminator.** F4 said: press Ⓐ +early and watch the **artwork**, not the plate — snapping means one clock, +animating means Ⓐ only forces the plate. **The artwork keeps animating**, frame +for frame identical to the control across the press. So the title is not one +clock, and Ⓐ must not advance the artwork's timeline. + +⚠️ **Reach:** the artwork half rests on a 5-frame window (the only stretch where +the press had landed and artwork was still animating; everything else was already +at α255). The plate half is not so limited — 0 vs 11 intermediate frames. + +⚠️ Also: Ⓐ **after** the title settles is *accepted* and the screen leaves. Three +presses to boot, as F4 said.