All 25 opcodes now have meanings. Ops 2/4/6/8 are integer compound assignment
(+= -= *= /=) and 3/5/7/9 the float versions; 10 and 11 are integer and float
compare writing three condition bits; 13-18 are je/jne/jl/jle/jg/jge; 21-24 are
push.i/push.f/pop.i/pop.f over deques at phase+44 and phase+64.
The shared-handler question is answered: the dispatcher leaves the opcode in r4
and the shared thunks never overwrite it, so those helpers take an extra opcode
argument and index a secondary table (0x82271448, 0x8227152C).
CORRECTION to my own tool and note: the branch/jump base is [phase+232], which
the phase initialiser sets to 0x24 + the phase's entry from the mission-level
stream -- 0xE4 / 0x14AA8 / 0x24B4C for Stage 02's three phases, not the file's
0x24. Measured on phase 1: base 0xE4 puts 525 of 525 branch targets on an
instruction boundary; base 0x24 manages 188. isl.py had been using 0x24 for
every phase, so its jump targets were wrong throughout. Fixed via
isl.phase_bases().
That also settles two things mission-script-ssb.md left open: offsets ARE
code-base-relative, and 0x1883's operand IS a code pointer -- the earlier worry
that some 'land on IEEE floats' was an artefact of adding the wrong base.
Resolver table 0x82271D74 gives four kinds: 0 global[i], 1 immediate,
2 special[i] ([phase+164]/[phase+168]), 3 local[i] ([phase+20+i]). Byte[0] is
the rvalue kind, byte[1] the lvalue kind, so the recurring instruction pair is
argument staging -- values land in local[] at offsets 0,4,8,0xC and the next
call consumes them. A built-in's arguments are not in its own instruction.
Fixed a decode that would have been believed: immediates in set.f are DOUBLES
carried as two words (op 1 stores with stfd). Reading the high word as a float
gives 2.125 where the script means 3.0.
isl.py now tracks staging and prints call arguments, so the run-up to the first
END PHASE in Stage02 reads as builtin=64(0x42,2,1,9,1,-1) / 120 / 59(3) / 85(3)
/ 4(3) / 6. Three built-ins taking 3 just before the phase ends look like a
wait-seconds family -- flagged as unconfirmed until the built-in table is read.
Read the encoding off the interpreter rather than guessing: instruction is a
big-endian u32 whose LOW byte is the opcode (25 of them, table 0x822635FC),
byte[2] is the instruction length -- every handler advances the pc by it -- and
bytes[0..1] are operand kinds. Op 12 is a jump whose operand is relative to the
code base [phase+232], which settles that offsets are code-base-relative for
this opcode. Op 19 is the built-in call: id in word@+4, and word@+8 is a
monotonically increasing STATEMENT id (0x245, 0x248, 0x24A, ...).
Confirmed by disassembling Stage02.ssb: the stream decodes cleanly from the code
base and routines terminate on ret exactly where expected.
Scanning the code region on the call encoding: 2846 call sites, 73 of the 147
built-ins used. The phase-control ones are located -- built-in 6 (end phase) at
12 sites, 62 at 3, 39 (mark last phase) at 8 -- so a phase has several exit
paths, as a mission with win and lose branches should.
New tool tools/re-capture/isl.py with --calls and --to (resync-into-target,
needed because instructions are variable-length so you cannot walk backwards).
Not settled: the 147 built-ins are uncharacterised, so this is structure without
meaning -- we can see THAT a phase ends, not WHAT was tested.
