a764421b1319903436042971ff1264fc09fa7fe4
59 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sylpheed port agent
|
170d255e82 |
port: the port never reported its own frame rate, and the menu draws at 9.7 fps
TEMPORAL-VERIFICATION §1 requires every instrument to state its achieved rate against its requested one. That has been applied to --film (which I fixed for exactly this), to the Decoder's harnesses and to the oracle. It had never once been applied to the thing being shipped. The port had no idea what rate it drew at and no way to say. It matters now because the splashes are the focus and the open complaint is that ours is LESS PRONOUNCED than the game's. A fade drawn in 45 frames and the same fade drawn in 12 are different animations, and nothing here could tell them apart. boot.gd now counts frames per screen and reports at every boot transition, at the end of the boot, and at every menu arrival. `worst gap` sits beside the mean because a hitch is what reads as wrong and a mean hides one by construction. Measured in this container, three boots: publisher_logo 17.3 / 19.6 / 25.0 fps worst gap 100-115 ms developer_logos 16.7 / 21.9 / 22.8 fps worst gap 103-138 ms title 17.2 / 14.2 / 12.7 fps worst gap 150 ms, all three main_menu 9.7 fps worst gap 150 ms 🟡 A LIVE CANDIDATE FOR PLAY-TEST FINDING 4, and the first one that is not dead. The timeline is delta-driven so durations stay correct at any rate; what changes is how many alphas the fade is DRAWN at. At the measured rates the 45-unit build-in gets 12-17 distinct alphas instead of 45, and the pre-blurred companion glow -- the thing that IS the splash's blur -- rises over 15 units and is drawn at FOUR TO SIX steps instead of fifteen. ⚠️ It is a candidate, not a cause: this is llvmpipe under Xvfb and not the human's hardware. The point is that the line now prints on every boot, so the next play-test answers it for free. Every other candidate for finding 4 is already dead -- keyframes vindicated against the vertex stream, companion quads drawn, blend space matching, settled pose at 0.01 % against the capture, no post-process pass to add. ✅ And nothing published is invalidated, which was worth checking rather than assuming: every timing result here comes from `_elapsed` (+= delta) or `time_units` (the same sum scaled), so all are correct at any frame rate. The splash dwells were measured across runs whose rates differed by 2x and agreed to ±0.03 s. Had the timeline been frame-counted, every number in this corpus would have been wrong by a factor that changed between runs -- which is precisely the failure the Decoder found in the emulator's rate and withdrew a finding over. Two defects in the instrument itself, both caught and fixed before it was trusted: - its first version printed "-9223372036854775808 requested". DisplayServer.screen_get_refresh_rate() returns a FLOAT and is -1.0 when the display cannot say, which Xvfb cannot, and %d underflows to INT64_MIN. It now names the cap or says `uncapped`. - it was BOOT-ONLY and said so nowhere -- `--menu` arrives through _menu_arrive, not _advance, so the mode a human spends time in reported nothing. That is the shape this port keeps finding in other people's work, and it lasted one measurement here. Refutation attempt: I checked whether the port re-decodes PNGs per frame, which would have been a real defect. It does not -- _load_textures caches at load_screen. Hypothesis dead, cheaply, and recorded. Not settled: what rate the human's machine manages; whether 9.7 fps on the menu is llvmpipe or something in our draw path; H6's +0x04 exposure; H1 (the Decoder is taking it this iteration). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018AHUQvXGyNcKonSEWsgWcX |
||
|
Sylpheed port agent
|
977965e92d |
port: the splash rate is withdrawn, and timing the shipping boot caught a why describing code we do not have
H7 closed: the Decoder withdrew the per-GamePart rate the same day (
|
||
|
Sylpheed port agent
|
6eccfa84d8 |
port: the plate's lateness is the unit, not our clock -- and the splash blur is an asset we already draw
H3, the PRESS (A) plate. Established which half it is, as the brief asked, and
the answer moved once during the iteration -- both readings are recorded because
the first one was confident and wrong.
Eliminated, ours:
rest.t not in the causal path. The plate's ARRIVAL is a declared keyframe
(transparent to t=214, opaque at t=236); rest.t=236 only picks
where `holding` parks it, and 236 is that ramp's own peak.
clock origin the two builds share one clock exactly -- 85 of 85 filmed title
frames have view_units == overlay_units to 3 dp.
NOT eliminated, the Decoder's: the unit->seconds constant. I first ruled it out
"by sign" using the emulator's 28.1 fps presentation rate. That conflates a
wall-clock conversion with units-per-game-frame; the correction is written down
rather than edited away. The Decoder's splash draw capture (
|
||
|
MechaCat02
|
b70b638cb4 |
port: Ⓐ was never bound to the pad, and the stick is not an edge
Both found by a human playing the port on a real controller. Both were
invisible to every check this port has, for one reason:
`--script` sends InputEventAction, which BYPASSES the input map.
So the harness asserted every line of code AFTER the map and nothing about the
map itself. Measured on this Godot, not remembered -- the remembered answer was
wrong:
ui_accept key:Enter, key:Kp Enter, key:Space <- no joypad at all
ui_cancel key:Escape <- no joypad at all
ui_up key:Up, JOYBTN:11, JOYAXIS:1- <- d-pad AND left stick
ui_down key:Down, JOYBTN:12, JOYAXIS:1+
Four actions worked on the pad and two did not, which presents as a broken
controller: navigation moved, Ⓐ skipped nothing and opened nothing. Godot
4.7.2 binds no joypad button to ui_accept or ui_cancel.
Gamepad.bind_missing() ADDS the two buttons to the built-in actions rather than
redefining them in project.godot, which would replace the built-ins wholesale
and drop the keyboard bindings silently.
Second defect, same blind spot: an InputEventAction is not an analog axis. The
left stick is bound to axis 1, and an axis is not an edge -- held at deflection
it emits an event per jitter, each reporting the action pressed. That was one
cursor step per jitter ("moves the cursor too fast"). The stick is now latched
to one step per deflection, with hysteresis so a stick resting near the
threshold does not chatter.
AUTHORED, and deliberately the conservative half: whether the game REPEATS a
held direction, and how fast, is an oracle question. One deflection one step
cannot run away and invents no rate. Logged as BLOCKED H1.
tools/port/verify-input asserts the map and the latch, with a control that
removes each check's OWN subject -- its first version inverted all nine
assertions when only two depended on the fixup, and reported seven correct
checks as broken. Three rows say plainly they are not controllable (they assert
Godot's own bindings) and one is a negative carrying a positive control (R4),
rather than faking an inversion for either.
Also logged BLOCKED H2, unguessed: the splash blur/fade-in is more pronounced
in the game than in the port. The port applies no blur at all. Noted there that
the two splashes are the only screens reaching the rest() plateau-less
fallback, which the R1 pass just re-opened in both directions.
|
||
|
Sylpheed port agent
|
d45b23ebbe |
port: draw the plate's highlight additive, and find my harness poses it where it cannot be seen
blend-bit-vs-oracle.txt entry 2: ptbtn00 alpha-over, ptbtn00f ADDITIVE -- the PRESS (A) plate and its own highlight, one bit apart. Entry 4, the whole title, is alpha-over throughout including ptlogo_back2/ptlogo_back2eff, which independently kills the "frame-shaped and mostly transparent means additive" rule I declined to adopt. Bands are now per DRAW OP rather than per paint-order entry: one band per element cannot express base alpha-over with its own focus record additive. The change reported zero three times and each zero had a different cause. First, additive_elements was assigned to `view` in three places and to `overlay` in none, and the plate is an overlay -- every other decoded rule on that page goes to both. Second, I then measured that the element is never drawn, suppressing its sprite at six times across the cycle for 0 px every time, and was one commit from filing "the port never draws the plate highlight" as a defect. That sweep was invalid: I varied --time while passing --loop-phase=0 in every run, and --loop-phase pins exactly the clock a looping record runs on. Six samples of one phase. Third, swept properly, ptbtn00f contributes 0 px at phase 0 and 22-29k px at phases 20-100 -- and verify-capture's title_plate row poses at loop-phase 0. The row that validates the plate is blind to the plate's pulse by construction. It correctly reports 13.03 / 0.09 % unchanged while the fix moves 26 319 px at phase 20. Stated in the tool next to the pose. Not verified against the oracle: every title-plate capture we hold is at the blind phase, so no capture here can confirm the port now draws it right. Asked. |
||
|
Sylpheed port agent
|
49a6333166 |
port: free the canvas items I leaked, and refute the blend measurement's reach sentence
The RenderingServer rewrite leaked 5 CanvasItem RIDs per run -- exactly the number of paint-order runs on the main menu. Items created through the server are not owned by the node; a child Node2D would have been collected for me, and the reason for not using one is the reason this had to be paid for. Freed in _exit_tree. Nothing failed. verify-capture was green on every screen and the pictures were right; the leak line sat next to "N ObjectDB instances were leaked at exit", which BLOCKED.md records as engine-side and not ours after releasing every reference the port owns moved the count not at all. A new leak line beside a known-benign one is close to perfect camouflage. What distinguished it was the number: 5 is a count of my bands. Refutation, and it lands. ui-blend-mode-measured.md closes "every element on the two screens the port ships is in the table except the two above and pteff10". Checked against my export, counting the summary table's prose rows as coverage: exactly right for main_menu, and on EXTRAS it misses four -- ptframe4, pteff21, pteff22, pteff23. Five, not one. They are not an arbitrary four. They are precisely the elements the port now measures as the worst on that screen, ptframe4 at 16.19x the frame mean. Every measured row still stands and the port has transcribed all of them; what is wrong is the reach, and it is the difference between "one loose end" and the open ask in BLOCKED.md, which now says so. Secondary, offered as such: "every button" in the summary row is a class generalisation in a document that warns its reader to take the table as per-element facts. No button appears in the EXTRAS draw log at all. Very likely right, nothing of mine depends on it. |
||
|
Sylpheed port agent
|
c453d8dade |
port: draw the measured additive blend -- main_menu 13.21 -> 10.67
The Decoder logged RB_BLENDCONTROL0 per draw in Canary on both screens. 0x01010101 is src=ONE dst=ONE, additive. That makes the blend a transcription rather than my proposal, and they withdrew the "any blend you choose is authored" instruction explicitly. Their control is what licenses the change: one pixel shader, 0xE59B2B3DA4AA9008, runs with BOTH blend states on the main menu -- 12 additive draws and 18 alpha-over. The frames and ptbase share a shader; only the blend register differs. authored/rendering.json gains additive_elements per screen. Every id is a measured draw and the reach is written beside it. verify-capture: main_menu 13.21 -> 10.67 (0.06 % -> 0.02 %), extras 13.38 -> 11.43, main menu with ptbtn04 focused 13.82 -> 11.36. Per element, ptframe1 22.72 -> 4.17 and ptframe2 13.09 -> 3.32. Neutrality control, free with the table: publisher_logo 2.17 and developer_logos 3.05 are unchanged to the digit. Those are the screens whose metric is absolute and they carry no additive element, so the rewrite that routed every draw through RenderingServer canvas items did not change the picture. The improvement is the blend, not the plumbing. RenderingServer rather than child Node2Ds because boot.gd calls view.queue_redraw() from nine places and none reaches a child node -- bands would paint the previous pose, which under --script=wait is a plausible wrong capture rather than an error. Runs are recomputed per frame: the additive elements are consecutive on both measured screens, and that is an accident of those two screens. And the change first ran with the material left at its default MIX, moving ptframe1 from 22.72 to 22.69. Nothing errored and a 0.03 move is a plausible negative result. It was caught only because the measurement predicted a large move. Not done: ptframe4 is now the worst element on EXTRAS at 16.19x the frame mean and additive would plainly help it. It is not in the measured table, so it is not in the file. Filed in BLOCKED.md with pteff21/22/23, which are also in no captured draw. Refuted, mine: "neither frame has a fully-opaque pixel" was true and was not the discriminator -- pteff10 has max alpha 130, no opaque pixel, and measures nearly exact. The direction survived; the reason for it did not. |
||
|
Sylpheed port agent
|
2759f3e719 |
port: their docstring point found three stale claims in my code
Their sharpening of my harness-note finding: a why in an authored file has a convention demanding a citation; a docstring has nothing, travels with the code, and reads as authoritative. Their instance was ring_row.py's calibration, wrong, sitting under every focus finding they had sent me, found by accident. Swept mine for numbers I had corrected in DECISIONS.md. Three live instances, each contradicting my own log. video.rs asserted '28 % of S00A's frames presented and 47 % of ADV's' as measured; boot.gd asserted that the same numbers 'refuted the claim outright'; dialog_rows.rs said 'by three routes'. All three were retracted days ago in the log and never in the code -- the percentages came from contended runs and the counter is an upper bound that goes vacuous once the engine outruns the stream, and three routes became two, one compound. verify-transcode-fidelity was the only one already correct. Third time this pattern has bitten me, and it is the one audio.json's own why warns about: a correction that does not reach the artifact a consumer reads has not been made. First was loop_why shipping a refuted story into manifest.json, second a BLOCKED row, this is code comments -- the worst of the three because they sit beside the thing they describe. So the class is now checked rather than swept: the retracted numbers are register rows carrying the propositions they asserted, and check-claims immediately failed on my own corrections quoting them unmarked. The next stale number of this kind fails a run instead of waiting for a sweep. What it does not cover is a docstring number that was never corrected anywhere. The register holds only what I have already retracted, so it catches propagation failures rather than wrong numbers -- their ring_row.py case would still have gone undetected here, because nothing had retracted that calibration. Their closing observation is the honest limit: the only thing that has actually caught these is one of us reading the other's sentence for its own sake, which is not a filter and does not scale. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
a3ec9d03fa |
port: a mistyped mod override was silent -- the liveness defect, in the product
Every checker fix this week was about a tool that could not tell 'I checked and it was fine' from 'I checked nothing'. The port had the same defect facing the person the asset tree exists for. ExportTree.resolve announces every shadow as it happens, and its comment already records why a startup summary was wrong. Nothing reported the opposite. Measured with two planted overrides, one correct and one in a mistyped directory: the correct one is announced and the typo produces NO OUTPUT AT ALL. The modder sees the port load, run, and say nothing about the file that did nothing -- MODDING rule 4's own failure mode, since base-and-overrides is only usable if an override that misses says so. ExportTree.unused_mods() and a report at run end now list them. Controlled both directions: one inert file with the typo present, silent with it removed. Getting the category right took three tries and that is the point. v1 'never used' flagged data/mods/README.md on every run, and a report with a standing false positive is one nobody reads -- precisely the failure it exists to fix. v2 'no such path in the export' was correct and still flagged the README. v3 excludes by extension with the rule checked rather than assumed: the export tree contains only png, json, ogg, ogv and cmd, verified zero .md anywhere, so a .md in data/mods could never be an override by construction. The report also separates what v1 conflated: a file whose path exists in the export but was not read this run is NOT listed. Every line printed is an override that can never apply, whatever the run does. boot.gd already had an _exit_tree and adding a second was a parse error -- the run failed loudly instead of one hook silently replacing the other, the cheapest possible failure mode and only because GDScript rejects it. Their P3 delivery is taken at the strength given: Q6's count-match has disc support for its structure -- every button record across all 16 GP_TITLE entries is ptbtn00, ptbtn01-05, ptbtn11-13 -- but it does not show that event 3 is a particular row, and they said not to author from it. flow.json already binds buttons by measured screen rather than event index, so nothing changes. Their own negative is narrower than 'not found': the DIFFICULTY search assumed four items pair with f variants, so what is established is 'not an 8-record btn-named build anywhere'. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
ca7dd583d5 |
port: the counter-example I kept asking for was in a file I wrote
For several iterations I said the MISSION-SELECT-versus-top-item ambiguity needed
a screen whose opening item is not its first, and that none was known. The Decoder
found one and reported it had been sitting unconnected in their corpus.
It is in mine too, and I authored it. authored/flow.json under
main_menu/buttons/ptbtn01 has read since
|
||
|
Sylpheed port agent
|
1e8c457a8b |
port: make the frame count permanent, then correct what I read from it twice
The Decoder's closing point -- the inference is cheap and the measurement looks expensive right up until someone does it -- is actionable, so the probe I reverted is now permanent. The exporter records each transcode's duration and frame rate in the manifest (probed from the file it wrote, not the source), and every video run prints what it showed against what the media holds. An instrument that has to be added before the question can be asked will not be there the next time somebody reasons instead. Then the instrument corrected me twice more. It is an UPPER BOUND, not a count. It counts engine frames, and the engine renders the UI at its own rate: on a quiet box ADV drew 6480 frames across a 4123-frame video, 44 fps against the media's 30. Above that crossover it constrains nothing, and '157% presented' is the counter used outside its range. The report now says so instead of printing a percentage. So 'the player skips, heavily' is not supported. At 8.3 engine fps under contention S00A could not have shown more than 28% -- a valid bound under contention and nothing more. Quiet, the bound is 88-90%, permitting anything from no drops to a tenth. And the 720p-versus-432p contrast is refuted -- the finding I sent them twice. I reported ADV +6.7% against S00A -0.5% and built 'heavy decode falls behind, light keeps up' on it. Quiet, both run +6.7...+6.9%. The -0.5% was a contended run in which the player dropped frames to hold schedule. I was measuring which run happened to share the box and reading it as a property of the resolution. What survives is sturdier than either: playback runs +6.7%...+6.9% long on this container, five runs, both videos, quiet, resolution-independent. Three corrections in three iterations, all mine, all the same shape: argued from an absence; measured and over-read; then found the measurement was taken under a confound I introduced myself by running the suite alongside it. Their rule needs a companion -- ask what the quantity can be skipped by, and ask what else was running. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
7df386e07d |
port: running it as a player finds two defects reading it did not
--boot --script= parsed, was stored, and did nothing. The script only starts at _menu_enter, and a --boot run without --play never enters a menu -- it holds on the title and quits. The run completed, exit 0, no menu line, no press: a clean result to a question never asked. This file already warns about that exact shape 600 lines above the bug, where --capture used to photograph the first frame of a scripted run. The warning was written, kept, and did not stop the same class recurring in the neighbouring flag. Now push_errors and exits 2, naming both working forms, refusing rather than implying --play since the two runs differ by 157 s of intro. Verified: --boot --play --script walks power-on through splashes, ADV, title, (A), main menu, down, (A). A comment above audio.play_bed described the port as CHOOSING the menu track, which HANDOFF Q10 refuted a week ago -- BGM_103 is measured on three independent legs and audio.json says so. Third instance of the drifted-comment trap. The dead phrase is now a check-claims register row, controlled: a planted revival fails and removing it passes. And the boot's wall-clock seconds are a property of this container. ADV takes 146.6 s of wall clock for 137.44 s of media, +6.7%, while S00A runs real time at -0.4%. Not a post-roll and not a general deficit: ADV is 1280x720 and S00A is 768x432, this box has no GPU, and 720p Theora decodes below real time here. The transcode is faithful against a 137.71 s source and the exporter does not rescale. P3/P7 artifacts quote seconds containing that deficit -- reproducible here, not a statement about the port or the game. Comparisons with the Decoder's measurements must go through media length, not wall clock; they carry an explicit emulator pacing factor for the same reason and I had been quoting mine as exact. Their negative result on LOAD GAME, TUTORIAL and OPTIONS leaves guard_focus_scope right to count them UNMEASURED rather than 'resets'. The transferable part is their instrument story: a narrow calibrated reader failed, so they generalised to a whole-frame comparison, which died the moment a crash dialog overlaid the frame while the narrow reader kept working. contract-check is deliberately narrow, individually anchored checks for the same reason, and the temptation after an ANCHOR LOST will be to loosen the matching -- trading a failure I can see for one I cannot. Every asserting check passes. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
6e3347a338 |
port: the main menu remembers its cursor -- a measured P5 defect, fixed and scoped
Measured by the Decoder today: (B) from the menu to the title and (A) back returns to the item you left, not to a default; their control passed first, two delivery-confirmed DOWNs moving the cursor exactly two items before the round trip. The port reset to initial_focus on every entry, so a player who moved to EXTRAS, pressed (B) then (A) landed back on NEW GAME. MenuFlow.enter() now consults opening_focus(), and a new set_focus() writes the memory. set_focus() exists because two call sites set focus -- a cursor move and (B)'s restore -- and a memory updated at only one of them is right until the player uses the other. focus_persists is true on main_menu and nowhere else, and the scope is the authored part. wrap generalised because it was measured on two screens; this was measured on one. Here that is stronger than a preference: extras opens on MISSION SELECT as a MEASURED initial focus, so a menu-wide memory would have silently replaced a measured value with a derived one. Both halves are in one artifact, because a one-sided test passes a port that quietly generalised: the menu returns to ptbtn05 after the round trip, and extras opens on ptbtn11 both times despite being left on ptbtn12. contract-check asserts the pair -- on where measured, off elsewhere -- and fails its known negative. Eleven checks. Not assumed: whether the memory survives a reboot, or whether any other screen has it. Their reach is one boot, one round trip, one direction. The finding also reframes this morning's initial-focus warning without settling it -- if focus persists, a reading not taken on a fresh boot's first entry is measuring history. NEW GAME stays authored, on its own reasoning. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
6a8b80faaa |
port: the contract I read is 3185 lines shorter than the contract
docs/port/HANDOFF.md on main is 926 lines, last touched |
||
|
Sylpheed port agent
|
3a9d0223f3 |
port: test the half-guard they named -- it found a real gap on first use
They flagged that my pose line reports the pins from the variables in force, never checked against a pin set but not reaching the view. I had recorded the same doubt and not acted on it. The case is the overlay: a second ScreenView with its own pins, while the announcement read view.* only -- and the plate carries a looping focus record, the clock in question, drawing from overlay.*. Extended the line to report the overlay's pins, and its first use printed overlay(loop-phase=0.0, leaf=free): overlay.loop_phase_units was wired and overlay.leaf_time_units was not. A run requesting both had one pin reach the overlay and one not, and the pre-fix announcement would have printed leaf=0.0 from the main view while the overlay drew free-running. Their half-guard precisely. Currently inert -- press_start carries no leaf, so the render is byte-identical before and after. The gap was real, live for any overlay carrying a leaf, and cost nothing today. Fourth instance of their remedy of putting the qualifier in the text rather than the reader's memory, and it caught something within a minute of existing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
c1092e25b5 |
port: verify every documented invocation -- one runs forever and did not say so
Flagged the --boot family as unverified three iterations running, deferring each
time on cost. Done: --boot terminates at 156 s on title+plate; --skip-at=1 puts
the title at 7.80 s against 152.54, so the skip is real and quantified;
--film with --film-interval=0.5 writes 375 frames; --play hands over with 'menu on
title' at 7.77 s and stays live by design.
And --boot --film= never terminates. The boot-quit branch is gated on _film ==
at line ~499, and a second quit path on the same condition, so a filming run keeps
capturing past the title forever -- measured still filming at 300 s. verify-dwell
wraps it in timeout so the behaviour was known to whoever wrote that tool, but the
documented example is bare and a reader following it gets a process that looks
hung. That is the failure boot.gd's own header warns about, committed in its own
usage block twelve lines away. Fixed with the measurement.
The deferral was the mechanism: three times I judged the cost too high and
recorded the judgement honestly, which kept a non-terminating documented
instruction alive for three iterations. 'Too expensive to verify' and 'unverified'
are the same state and only one sounds like a decision.
Also records their correction -- the menu spans {0,1}, so even a per-outgoing-screen
key would not be single-valued, making 'not modelled' more robust; and EXTRAS is
structurally stuck at n=1.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF
|
||
|
Sylpheed port agent
|
9cf04a4fc6 |
port: branches announce themselves -- their lesson, applied where it already bit me
Their salvaged iteration produced the rule I most needed: have each branch announce itself in the log, so a run that took the wrong path says so before its numbers are read. Assertions catch the edit; log lines catch the execution. Two of my own failures were of exactly this shape. --no-hold under --time produced byte-identical renders because --time sets frozen and pose_at tests 'holding and not frozen' -- a request silently overridden reads exactly like one that worked. And I enumerated three free-running clocks, wired two, and a run pinning two of three looked identical to one pinning all three. Both now announce. --no-hold prints INERT with the reason when --time is present, and the pose line carries the effective configuration of all three clocks: 'pose = timeline [frozen, loop-phase=free, leaf=free]' against '[running, loop-phase=0.0, leaf=free]'. The second prevents precisely the failure I shipped -- pinning a subset and reading the result as pinned. Verified the harnesses are unaffected: nothing under tools/port/ parses that line. Also accepts their scope correction: a claim about code needs its ref attached, the same way a number needs what it is a number of. With main 145 behind and both of us on topic branches, 'the code contains X' is underspecified by default, which is how we were both correct about SYLPHEED_KF_TIME_SHIFT simultaneously. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
9e7bca6de9 |
port: three live-but-undocumented flags, and a dead instruction I wrote while fixing them
Their newest class -- the instruction is dead AND the working one is undocumented -- inverts last iteration's sweep. I checked documented->parsed; the reverse is parsed->documented, and it enumerates, so it completes rather than samples. Eighteen flags parsed, fifteen documented, three live and undocumented: --film-interval and --skip-at (used by verify-dwell, in no usage example) and --no-hold, which plays a screen past its rest instead of clamping each element at its hold, documented in DECISIONS.md and absent from the header a reader consults. A capability that exists only in an 11000-line record does not exist to anyone reading the interface. Then I documented it wrong in the same command. I wrote the example as --screen=title --no-hold --time=6 and tested it: the renders are byte-identical because --time sets frozen and pose_at tests 'holding and not frozen', so an explicit instant makes --no-hold inert. Without --time the pair differs by max 253. I wrote a dead instruction inside the commit fixing dead instructions, and it only failed to ship because I ran the example rather than trusting that a parsed flag works -- the gap I had named one iteration earlier. Strongest evidence yet for their ranking: a wrong description costs a reader's belief, a wrong instruction hands them a null result that looks like a finding. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
66f0adce02 |
port: sweep instructions above descriptions -- the silent class is clean, two loud hits
Their sharpening: a stale instruction manufactures a false confirmation, strictly worse than a stale description that merely misleads. Applied to my instruction surface, the documented invocations in tool and script headers. All fifteen distinct flags across those examples are parsed, so nothing in my headers can produce their failure mode by being inert. But 'parsed' is a proxy and its gap is known -- --shots parses and does nothing on the --boot path -- so I ran two documented examples end to end rather than trusting the grep, and both produce a 1280x720 frame. Two hits, both loud rather than silent: 11 references to tools/verify-capture and tools/verify-screen, paths that do not exist since the tools are under tools/port/ (fixed in 4 files); and check-all claiming eleven tools where there are fourteen (now states both so the sentence dates itself). The distinction worth recording: mine fail loudly, theirs failed silently. A wrong path announces itself; an inert environment variable returns a clean wrong result. Both are stale instructions and only one manufactures evidence. Honest limit: I tested the flag surface plus two examples end to end, not all thirteen documented invocations -- the --boot ones take 156 s each. That is a judgement about cost, not a claim of coverage. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
d725f8e2f8 |
port: the dead-rule grep found two more, and the cause is my correction habit
Their generalisation of my 'untimed' marker -- search for the vocabulary the dead rule needed -- is the cheap version and it works. Swept for the nouns of every rule refuted this session. Two real hits: verify-screen:57 still asserting 'all four are COMPOSITED rather than standalone', the reading withdrawn after they tested it disc-wide at 7.9%; and boot.gd:197 opening with the pre-fix 'no time slot' claim before retracting it. Third and fourth instance after spin_period_units and exit_ramp_units, and in all four the correction sits below the false claim in the same block, with both written by me. The diagnosis is a habit: my corrections are ADDITIVE. I append a CORRECTION block and leave the original standing, which is right for a record and wrong for a statement -- a reader takes the first assertion and the retraction three lines later has already lost. The habit that creates these is the same one I adopted to make corrections honest. Fix: keep quoting the original but demote it grammatically, leading with 'what this used to say'. Both rewritten. Verified comment-only by artifact rather than by reading -- the main_menu render is byte-identical before and after. Also records agreement with their caution: the failed gap+clear rule was rejected, not narrowed to menu transitions. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
dbd75bcc56 |
port: sweep for their tell -- two descriptions my own code had already refuted
Their sweep cleared my three quoted figures: the splash dwell spans were corrected today, and the gap and cold-boot intervals are capture-derived, which the record-layout fix cannot reach. Their sharpening -- the tell is not that a number changed but that a page hedges a quantity it should not need to -- made a sweep of my side possible. The marker is 'untimed', since there are 0 untimed keyframes in 866. Two hits, both worse than hedges: descriptions their own code had already refuted. Hit A: spin_period_units' doc stated the rule as 'the first timed and the second untimed', the pre-fix version, while the body directly below carries a block explaining that this rule silently stopped the ring and implements the span-based replacement. A function and its documentation disagreeing, with the documentation stating the refuted version. Hit B: exit_ramp_units' doc claimed the value is authored in timing.json and that the disc has no time slot on that keyframe. Both false -- the entry was deleted as progress and the corrected layout times every pose. And I wrote the correction myself, immediately below it, two iterations ago without looking up. Both are fixed code under an unfixed description, with the fix and the falsehood within twenty lines of each other -- not drift, but editing at the point of failure without re-reading the frame around it. Their practice of quoting the original sentence is adopted so the change is visible. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
cf8f001956 |
port: the oracle harness was nondeterministic and I quoted it for a dozen iterations
verify-capture's main_menu row reads 13.30 / 13.27 / 13.25 / 13.26 across runs this session while every other row is identical to the digit. I cited those numbers repeatedly, including in the rest() adjudication. Cause: the focus ring spins on time_units raw rather than the pose clamped by holding -- deliberate and correct, since the ring is the one thing on a settled screen that keeps moving -- so its angle at capture is set by the wall clock. extras is stable because nothing there spins. --loop-phase already existed and did not cover it: it pins the looping focus record phase, while the spin is a second free-running clock I guarded once and never connected. Extended loop_phase_units to pin the spin too, and verify-capture now passes --loop-phase=0 at all four render sites. The control matters because the drift was intermittent -- three unpinned runs gave 13.25, 13.26, 13.26, so three pinned runs agreeing would prove nothing. Phases 0/30/60/90 give 13.2583 / 13.1991 / 13.2637 / 13.2588: the pin is live and the 0.065 spread is the whole of the observed drift. Non-finding recorded so nobody mines it: phase 30 scoring lowest is not evidence about the ring's real phase -- 0.065 against a ~13.2 gamma floor is 200x too small. A margin only means something against the noise it sits on. No conclusion changes: the smallest margin any of them turned on was 0.14% differing area. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
e005016751 |
port: count the fallbacks instead of inspecting them; black_hold's absence is now audible
The Decoder sharpened the sweep in a way that invalidates part of how I ran it: an in-range fallback cannot be caught by inspecting output, because the output looks exactly like the true case -- the only way to know is to count how often it fires. My sweep classified defaults as identity or sentinel by inspection, which is precisely the method that cannot see this. Counted: rotation_deg -> 0 fires 0 times in 866 keyframes and 178 rest poses, and ramp is present in authored/. So rotation is read, not invented -- the same conclusion they reached for design size, reachable only by counting. The count exposed one I had waved through twice: black_hold_units defaults to 0.0 and its authored value IS 0, so deleting the entry would be invisible -- same behaviour, no error, and the reasoning in black_hold_why (four measured gaps, why 0 over the better-fitting 4 or 6, the tripwire) silently stops applying. Fixed the same way as exit_ramp_units: fallback is -1.0 and an absent key raises an error naming what was lost. The control is the demonstration: key present 0 errors, key deleted 1 error, and the render byte-identical either way. No output inspection could have detected the deletion. Does not change the value: still 0, still wrong by 4-6 units on three of four measured transitions, still no rule. Only its absence is now audible. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
0be8348a6f |
port: the refuted 24-unit constant was living in a default; make it loud instead
ScreenView.exit_ramp_units defaulted to 24.0 -- the constant HANDOFF ask 2 told this port to author and that it refused, since the file's own ramp is 10 units. The authored entry was deleted as progress when the corrected record layout removed the unknown, and the default plus boot.gd's timing.get(..., 24.0) made that deletion a no-op. Both use sites are unreachable on today's export (866 keyframes, 0 untimed), so the branch is kept for an older export but no longer invents: the default is -1.0 meaning not supplied, and an untimed group now raises an error naming the screen rather than fabricating a duration. My first verification accused the change: main_menu 641941 px and extras 226009 px changed, on a branch that cannot execute and with no error raised. The cause was --screen=X --capture= firing at an uncontrolled instant -- t=9.00 in the earlier run against t=8.00 in the later one, one unit apart mid-build-in. Three runs now are byte-identical, so it is not noise; the instant is stable within a session and moves between them. Re-run with --time=1.0 pinned, old against new is byte-identical on all four screens. Records the harness limitation: --screen=X --capture= cannot be used for before/after comparison on an unsettled screen, which also explains the earlier settle-vs-rest confound. Also corrects my overstatement that other tools call the CLI -- verify-screen is the only one, checked. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
955f5b0c02 |
port: the rest() flash defect reaches all four splashes I ship; the port survives it
The Decoder censused rest()'s dwell fallback from the file side: 2305 elements have no plateau, 1697 of those get a visible pose, and in GP_TITLE all four visible fires are on the splash screens this port ships. Confirmed in my export. Refinement to their description: they named the [0:a0 15:a255 30:a212 45:a0] shape, but palogo_gamearts_eff and palogo_seta_eff hold 255 through t=30, so their fallback lands on the flash PEAK rather than its decay. Same defect, worse pose. The port ships the right frame and there is now a number for it. Publisher splash against the committed oracle capture: timeline (shipped) RMSE 2.17 / 0.01% differing; --pose=rest 9.05 / 0.75% -- 75x the differing area on a screen I ship. So the rule added to verify-screen's header after the title_jp mistake generalises, and is demonstrated against an oracle rather than argued. What did need fixing: ScreenView logged '(transparent at rest)' for every skipped element whatever instant it posed, so it said that about palogo_sqex_eff, whose resting alpha is 212. That is the same rest-versus-posed-instant confusion that cost a wrong conclusion, pre-printed in the log. It now names the instant. Controlled both ways: timeline says 'at t=6' and skips the flash, --pose=rest still says 'at rest' and draws it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
8ae0ec2287 |
port: verify-screen was nondeterministic; pin the pulse phase in the harness
Running the full set after the plate fix, press_start returned over3 5021, 8919, 5021 on three identical runs. The plate's looping focus record takes its phase from time_units, which free-runs, so the captured frame lands wherever the grab fell -- while the reference renderer cannot pulse at all. The port is not the thing that is wrong: the pulse is measured and a thing that pulses does not stop because the screen arrived. ScreenView.loop_phase_units pins it, negative means free-running and stays the default everywhere, and only the harness passes --loop-phase=0. Controlled: pinned, 3 runs identical; free-running, 3 of 4 identical and one different. That 3-of-4 is why it survived -- it looks deterministic most of the time, and without the negative control a no-op flag would have been indistinguishable from a fix. With the phase pinned press_start reads max 1 / over3 0 OK -- the recorded baseline exactly. Fifteen of sixteen rows now match. The sixteenth, title_jp, has genuinely drifted: 155/20498 -> 233/61208, deterministic, on the Godot side, localized to one 350x396 block at (405,74). There is no capture of the Japanese title, so I can say the renderers moved apart but not which moved. Recorded as an ask, not resolved. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
b9667c6c9a |
port: the PRESS A plate comes back after B, and it did not here
The Decoder measured that after B from the menu the plate is re-drawn (
|
||
|
Sylpheed port agent
|
64b76b0892 |
port: the runtime now says what the voice export is missing, at the moment it plays it
The manifest has carried the gap for weeks and the runtime printed '+ voice ADV' and nothing else. A reader of manifest.json gets a paragraph; a person LISTENING gets clean dialogue and no way to learn a stream is absent. NEW GAME already announces the screens it jumps over; audio had no equivalent. ManifestAudio gains -- one line naming what is KNOWN missing, absent meaning nothing is known rather than nothing is wrong -- and MenuAudio carries it so _play_video can print it. Verified on the boot's ADV and P7's S00A. The first version of the message was FALSE for one of the two assets: it said 'one is a start-truncated stream', which is ADV's story, where S00A's dropped chunks are digitally silent. Caught by reading the output for both, which I nearly skipped because the ADV line was obviously right. Now states the counts and points at the entry's why. A message generated once from a template but true only for the case it was written against is harder to see than a wrong number -- the sentence is well-formed and confident in both places. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
922d93df5b |
port: a static overlay advances instead of freezing; and their pulse floor is unreproducible
--screen=X animates X but froze an overlaid Y -- my earlier fix overshooting, replacing a frozen-too-early overlay with a frozen-at-arrival one. The plate pulse made it visible: oscillating on the boot path, flat here. Now offset, not pinned: the overlay starts at its settle and takes the main view's delta. Static path now pulses 95.85 -> 115.41 against the boot's 95.68 -> 115.52; still frames unaffected and title_plate holds at 0.00%. Both halves were mine a week apart, and the over-correction was invisible until a third change gave it something to be wrong about. Refutation attempt on their pulse floor: 159/714/1520 is NOT reproducible from the published description. My counts on the same capture are 3-5x theirs at every threshold, so their region must be a tighter crop; neither region nor threshold is stated. The RATIO survives robustly -- 1:10.4-10.9 across a wide band, bracketing their 1:9.6 -- so 'steady base plus pulsing glow' stands, which is all the port's implementation rests on. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
8adae30d1a |
port: the plate pulses -- restore the looping record, over the base rather than instead of it
Ask #1 measured: held at the title with no input the plate oscillates ~23 cycles per window with no decay and NEVER goes off -- floor 159 thresholded pixels, pulse bottoming at 714. A glow alone cannot do that (0 -> 80 -> 0); a steady base plus a pulsing glow can, and 714/1520 are base-only and base-plus-glow. The port already had the base right: ptbtn00's fade to 0 at t=244 is its EXIT ramp, and while held the base sits at alpha 255. The glow was missing. The defect was in the renderer, not the entry I deleted on 2026-08-29. _draw treated a looping record like a focused one -- drawn INSTEAD of the base, which is right for a focused button and wrong here. I deleted the right thing for the wrong reason. A looping record now draws OVER the base and the entry is restored. Rendered: 95.68 base only, 115.52 at peak, period 1.980 s against a declared 120 units = 2.000 s, ratio 0.990. Visible on the boot path; not under --screen --overlay, where a static overlay poses at its arrival by design. Authored in UNITS on their instruction, with their three limits verbatim: one boot, does not distinguish boot from attract title, and 714/1520 is not an alpha ratio so no duty cycle is inferred. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
fdb33a9abc |
port: wire flow.json's dwell, assert the three authored values the port hardcodes
Applying the prior from six prior findings to authored/ itself: five keys had no reader. dwell, ramp, left_right, input_during_transition, stems. dwell is the one that mattered. Its own text says a measured hold goes there and a number placed there did nothing -- and two iterations ago I asked the Decoder for measurements destined for that slot. Wired now, and it stays EMPTY: the splash dwells are declared on the disc and measured to agree. I wired it to the wrong branch first and it did nothing, silently -- holding longer after settle is absorbed because the screen still leaves at exit_time + black_hold. A dwell must delay the departure. Caught only by testing the control: +120 units moves the transition 4.46 -> 6.43 s. ramp, left_right and input_during_transition describe hardcoded behaviour and are written like switches. Rather than invent the missing implementations, they are now asserted against the value the port was built for, naming the file -- which is the distinction left_right's own why claims to make and was not making. The validator is called, not merely defined. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
a758f9b247 |
port: --focus was ignored on the menu path; focus rendering now verified against the oracle
live-main-menu-options-focused.png -- the only capture of a known focus state -- was untestable because --focus= parsed, was stored, and was overwritten by the authored initial focus on every _menu_enter. Every run logged focus ptbtn01 whatever was asked for. Now pushed into the menu model so navigation continues from where it was forced. With it working, each capture picks out exactly one button: ptbtn04 at 0.1355% against 0.70-0.82% for the others on the OPTIONS capture, and ptbtn01 at 0.0705% against 0.72-0.84% on the plain one. 5x and 10x discrimination. First time the port's focus rendering has been checked against the game at all -- the existing main_menu row uses an authored focus and could never have caught a focus error. Records in flow.json that live-main-menu.png shows NEW GAME focused, so the authored initial_focus matches the one frame it can be checked against -- and that this does NOT overturn Q5's measured instability. It stays authored. Adds main_menu_options to verify-capture at 0.13%. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
69e9043b96 |
port: a second capture closes the sweep-geometry question; title+plate matches at 0.00093%
live-title-press-a.png was unused in the corpus. Posed at t=237 -- inside the plate's 8-unit window -- the port matches it at 0.00093%, against 0.0124% for the no-plate capture at leaf phase ~400. Two captures, two different phases, both under 0.013%: a systematic sweep-geometry error would leave a floor in both, so last iteration's caveat is closed. Sweeping the whole screen's instant against capture 1 gives at best 0.148% at t=230 -- 10x worse than the leaf-only fit. So that capture is the screen SETTLED with the sweeps still looping, which is the first independent evidence for the authored loop_leaf decision. Fixes the cause of a flat 1% floor: --screen=X --overlay=Y pushed the raw elapsed clock into the overlay (9 units at capture), so press_start drew nothing -- the flag whose purpose is 'put the plate on the title'. A static overlay now poses at its own arrival; the --boot shared clock is untouched. Adds title_plate to verify-capture at 0.00%, the most sensitive row in it. Its instant is FITTED and labelled as such. Also records that I nearly committed a wrong cause for the overlay bug: I wrote that nothing drives the overlay's clock outside a sequence. It is driven, every frame, from view.time_units. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
96fe0eac51 |
port: add --leaf-time, and the title's residual is the sweep phase (~400 units, not 357.7)
The Decoder's refined sweep fit had never been testable: verify-capture passed it as a whole-screen --time that pose_at discarded, and asking for it honestly poses past the title's group end. --leaf-time separates the leaf's clock from the screen's. Controls: the renderer is deterministic (3 runs bit-identical) and the sweeps move 0.40% of the frame between phases, so the comparison can see them. Sweeping the full 600-unit span gives a sharp basin at 390-415 units (0.0124%) against 0.2532% at t=357.7 -- 20x. So the title's 0.21% residual is the sweep phase, not structure: at the fitted phase it matches the capture as well as the splashes do. NOT adopted: the port loops the leaf freely and re-posing the harness to the fitted value would be tuning until they match. Filed instead, with the question of whether 357.7 and this are even the same quantity. Also verified last iteration's settle-window change was surgical: only press_start and its twin moved, 14 screens unchanged including title's Decoder-confirmed [160,236]. Settle-window ties exist on 4 screens but all sit under the 30-unit bar, so the arbitrary tie-break never reaches the runtime. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
3c71962698 |
port: the PRESS (A) plate could not be drawn at any instant -- four faults, and a misquoted number
1. --time= was silently ignored on any screen with a settle window >= 30 units: pose_at overwrote the requested instant with settle_instant. ScreenView.frozen now marks an explicit instant and skips both clamps. 2. press_start's settle window was [0,214] -- the dead stretch BEFORE the plate exists -- so its settle instant was t=107, where the element is alpha 0. The exporter now rejects intervals in which nothing is visible. title keeps [160,236], the interval the Decoder's draw stream confirmed. 3. My authored looping_focus_records entry for press_start/ptbtn00 drew a dim focus record INSTEAD of the plate's own sprite: max 0 vs max 252.5. Deleted -- an authored guess that overrides a decode with a worse answer is removed. 4. verify-capture passed --time=5.9617 for the title and it was never applied. Every title figure it has printed, including the 0.26% quoted to the Decoder, was measured at the settle instant under a note claiming t=357.7. Both rows now pose by omission and the note matches. title is 0.21% honestly; splashes unchanged at 0.01%. The boot's end artifact now contains the plate (region mean 95.7 vs 33.6). Corrects last iteration's BLOCKED row, which had the entry's effect backwards. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
09188ccbb2 |
port: fix two capture bugs, and the second was hiding a missing PRESS (A) plate
1. --capture with --script photographed before the first press (t=0.133 s, 10 of 16 elements transparent). Two runs differing by two presses came out bit-identical and I read it as 'runtime focus never changes'. Deferred to the end of the script; verified max 235 and t=82 units. 2. --boot --capture= wrote NO FILE: _finish_boot() is reachable only from the overlay-quit branch, but line 412 quit first because _overlay_spec is cleared when the overlay is raised. Pre-existing, confirmed by stashing. Fixed by also requiring _overlay_quit_at < 0.0. 3. The artifact that now exists shows the boot's end frame is bit-identical to the title alone -- no plate. ptbtn00 is opaque for 8 units (236-244) and the boot captures at 246.54, because it waits for build 4 to finish fading at t=261. Both halves of that are sound and they are incompatible. NOT changed; filed, since what settles it is what the game does after t=244. Defect 3 was invisible while defect 2 existed: a capture flag that writes nothing cannot show a missing element. Also records that runtime focus is FINE -- my contrary reading came from 410 files whose names did not match the flag I passed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
fce921d5c9 |
port: add wait:<seconds>, observe the bed's loop, and measure the seam at 3.4 s of silence
The port could not be asked to run for a stated duration -- a bare step is a no-op that returns at settle -- so nothing after the settle point was observable. An 87.7 s bed on a harness whose longest menu run was 7 s. The bed loops at 87.8 s against the track's 87.7 (r=0.947 and 0.885 on a clean bed-only recording): loop: restart behaves exactly as authored. First end-to-end observation of P6 looping. The authored 'audibly wrong at the seam' is confirmed and quantified: 36 consecutive near-silent 50 ms windows, 84.40-87.80 s, about 3.4 s of silence after a fade from RMS 2057 to 431. Recorded in authored/audio.json. It does NOT license trimming, which would still invent a loop point. My first wait: used create_timer and ran 39% long (30 s requested, 41.7 s wall) because an idle scene throttles the delta it counts down on. Now polls Time.get_ticks_msec: +4.6%. Checked before generalising: over a boot the port's clock tracks wall clock within 4%, so animation timing is sound and the earlier splash-dwell agreement stands. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
92369c0776 |
port: the menu bed plays under the cutscene -- announced, deliberately not fixed
MenuAudio.stop_bed() exists and is called from nowhere, so the bed started on the main menu runs through S00A and loops on past it, putting two unrelated music tracks on the bus at once. Established from the source and authored data, not from measurement. NOT silenced: MISSION says leave an unmeasured detail plainly wrong rather than plausibly invented, and music over a cutscene is caught by any listener in a second where ducking would sound right and be a guess. _play_video announces it instead, and stop_bed is kept as the one line to change. Also records that the envelope correlator is unreliable for music under music -- 0.15-0.42 for every candidate, peaks moving with window and template. I was drafting '46 s of unexplained audio' when the cause was the authored loop: restart. A margin needs a control at the SAME SNR. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
e9073750ac |
port: make ScreenView say what it could not draw; refute 'first-declared paints first'
skipped[] has been tracked and read by nobody since P1, under a comment saying a silently missing element looks like art. _note_structural prints from inside ScreenView rather than returning a value for a caller -- routing it through a caller is exactly what did not happen. Structural skips only; transparent-at- rest is ordinary animation. Zero found today: a guard, not a fix. The first version of that scan was a FALSE PASS: screen_view.gd did not parse (a line inserted at three tabs inside a four-tab block -- the substring assert matched a shallower indent), so grep counted zero from a dead script. The scan now counts the summary line as a positive control. Refutes 'the first-declared element paints first', which would have made the forced-backdrop rule redundant since all six forced elements are index 0. False on 8 of 16 screens -- decisively on main_menu, where index 0 is pteff00, painted LAST, and pteff00 is a measured control. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
be643ba58a |
port: withdraw 'the boot is known too fast' -- the splash dwells are declared and the port already played them
The Decoder measured both splashes over 3 cold boots: publisher t=0..255, developer t=0..210, the developer agreeing with wall clock to 1.1%. The port emits each declared value plus the 9-unit black hold, exactly. No code change. My error was the generalisation, not the arithmetic: build 4 is the title, whose exit is caused from outside its timeline, so it holds; a splash's exit is caused by nothing, so it plays out. I used the one boot screen the port is unaffected by to overturn the two it governs. Declining to scale by 9x while adopting the conclusion that implied was half a caution. Also refutes their two splash boundaries as not comparably anchored: 2.237 vs 2.414 units/frame in one boot, and the publisher has a glow symmetric with the developer's three. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
b366e404ee |
port: the clock freezes at settle -- my window is the game's, and the boot is known too fast
The Decoder measured build 4's top-level clock stopping inside [160,236]. The exporter computes title's settle window as [160,236,198] from the file alone. Same interval, two independent methods -- the first evidence for the settle instant that does not come from our own renderer. ptcopyright reaching alpha 255 exactly at t=160 agrees from a third direction. Corrects a claim in three places: timing.json, flow.json and boot.gd all said a screen's dwell IS its keyframe group and the port reproduced 'the disc's own pacing'. Build 4 declares ~120 presented frames and dwelled ~1100. The decision to hold zero extra stands; the claim that it was faithful does not. Checks their two declared spans against the file: both exact, with a 106-vs-105 interval-convention quibble that changes nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
39209eab05 |
port: the title's sweeps loop, the black hold is 9 units, and one claim refuted
THREE THINGS FROM THE DECODER, one of which I am not taking. REFUTED: "the developer splash is one composited quad, the bounding box of the three logos". The observed quad is 525x259 at (378,155). The three logos' bounding box is 500x421 at (390,164) -- a 259-tall quad CANNOT contain them, and palogo_anima alone starts at y=449, thirty-five pixels below that quad's bottom edge. The observed quad matches the union of gamearts_eff and seta_eff, 521x261 at (379,154), to about four pixels in every dimension -- and both of those are TRANSIENTS my own census flagged, dark by t=45, so a frame containing that quad is a build-in frame rather than the settled screen. I cannot see their draw stream, so I sent the arithmetic rather than a verdict, and the port keeps drawing three: I will not stop drawing an element on a claim whose stated identification excludes that element from its own bounding box. THE BLACK HOLD IS 9 UNITS, NOT 12. I authored 12 from Q7's luminance plateau of 0.17-0.23 s, supported by the menus' transition quad. The Decoder counted SUBMITTED QUADS instead -- luminance cannot separate the outgoing fade's tail from true black. Four frames with no sprite quad at all, at 2.284 units/frame derived from the disc as its own clock, gives 9.1 units = 0.152 s (6.9-11.4). That overlaps the luminance figure only at the top, and the true black is SHORTER still since both boundary frames carry picture. My 12 was supported by analogy -- a different screen's quad on a different path -- and a number that fits by analogy loses to one measured in place. verify-dwell's bound moved with it; both screens still agree. THE TITLE'S SWEEPS LOOP. The oracle shows the quad oscillating over its whole x range and resetting hard, one reset in the first title dwell and two in the second. The loop-length field could NOT have settled it, correcting a hope I had stated: both records declare exactly their last keyframe time, slack zero, and "loops at 600" and "runs once for 600 and stops" write the identical header. Verified on the two sweeps' LCM, since their periods differ: 600 and 720 realign at 3600 units, mean diff 0, against 0.438 at half that. Scoped to the title. The menus declare the same lengths but the oracle measurement is of the title, and my own weak evidence points the other way there -- best match with the sweeps off-screen, three times worse mid-screen, against a 73% on-screen duty cycle if they looped. Two weak signals in opposite directions is a reason to scope, not to pick. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
6c78b3cda9 |
port: the publisher residual was a missing black hold -- we had both dismissed it
I carried this as "0.03 s outside a composite bound, probably a property of the bound rather than the game", and the Decoder agreed. Both wrong, and the way it was settled is the point: I stopped reasoning about the bound and filmed the transition. At 0.05 s the port fell straight out of the publisher's fade into the developer logos -- mean 5.06 -> 0.32 at t=4.20, then 5.65 at t=4.25. NO BLACK FRAME AT ALL, where the oracle measures a 0.17-0.23 s pure-black plateau (HANDOFF Q7). The bound was fine; the port was missing a fifth of a second of black, and had been since P3. Authored at 12 units because the boot path has nothing to read it from: publisher_logo and developer_logos each carry a single palogo_eff0, a 1280x720 primitive with ONE keyframe at t=0 -- static, not a transition ramp. The menus' quad declares black for 12 units and 12/60 = 0.200 s sits mid-range, so the number is the disc's where a screen has one. Filmed after: t=4.25, 4.30, 4.35, 4.40 all at mean 0, then the developer logos at 4.45. publisher interval 4.26 DIFFERS -> 4.47 agrees; developer 3.62 -> 3.73, still agrees. Settled-frame comparisons untouched, as they should be. THE LESSON IS THE SHAPE OF THE DISMISSAL, NOT THE NUMBER. "A 0.03 s miss against a bound composed from two measured ranges plus jitter slack is more likely a property of the bound" is plausible, was accepted by both of us, and was wrong. The composite bound is why the miss looked small -- the underlying gap was 0.2 s -- and a plausible explanation for a small number is how a real defect stays hidden. The film cost one command. Also recorded: the Decoder has reproduced across two build-ins that the console NEVER draws ptlogo_back2eff3 (0 draws against ~5 expected), with sampling phase, invisible draws and position error all ruled out -- but WHY is not established, and nothing in eff3's record differs from its neighbours. The port keeps drawing it, deliberately: dropping an element the disc declares on a measurement with no mechanism is authoring a behaviour neither agent can derive, and nothing this port gates on would notice, since the flashes live only in the build-in and verify-capture compares the settled frame. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
4226505222 |
port: pose a settled screen at ONE instant -- title 1.81% -> 0.26%, splashes to 0.01%
The Decoder's finding, applied. `rest()` returns each element's last hold keyframe chosen independently of every other element: right for anything that ends the screen settled, exactly wrong for a transient. The title's ptlogo_back2eff1 is a two-frame flash (0 until t52, 255 at t54-56, 0 by t58), so its last hold IS the flash peak and rest() left it burning -- five of them, drawn at once. The settled instant is the longest interval containing no keyframe time, over a bundle's TOP-LEVEL elements. Reproduced here before adopting: title [160, 236], midpoint 198, the Decoder's number to the unit. The top-level restriction is what makes it match -- including the ptloop leaves gives [269, 540]. AGAINST THE ORACLE: title 20.92 RMSE 1.81% -> 14.61 RMSE 0.26% publisher_logo 9.05 0.75% -> 2.17 0.01% developer_logos 8.86 0.33% -> 3.05 0.01% main_menu 0.08% -> 0.08% window too narrow extras 0.19% -> 0.19% window too narrow Seven times fewer differing pixels on the title, seventy-five times fewer on the publisher splash, whose differing region is now a 13x18 box. The largest correctness gain this port has had, and none of it is mine -- it is a decode computed from the keyframe table with no reference to any capture. APPLIED ONLY WHERE THE WINDOW IS WIDE, and the bar is not invented. This export's widths split with nothing in between: 214, 190, 145, 76, then 12, 12, 8, 4. The bar is 30 units -- the Decoder's disc-wide census puts the knee there (30% of bundles >= 30, 42% under 10, the latter mostly loop* fragments meant to be in motion) and this export's screens sit 4x either side with nothing between 12 and 46. Two independent populations agreeing on where to cut. Checked unbroken: boot pacing unmoved, scripted walk runs end to end with focus restored. Also recorded: my "34 focus-record elements, only 2 varying" is right for GP_TITLE and reads as a fact about the format -- disc-wide it is 210 varying, 202 with rest() at the peak, concentrated in the paks a wider port reaches next. And their sharper framing, which I have adopted: a pulsing element has no resting pose at all, so rest() is MALFORMED rather than mis-answered on one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
d57366a35f |
port: the focus ring had silently stopped, and the plate's period is now the disc's
BLOCKED said the record-layout change touches five things: pose_at, settle_units, spin_period_units, exit_ramp_units and the plate. I checked two, reported that, and did not work the rest of the list. `spin_period_units` required "the first timed and the second untimed". Under the corrected layout the ring reads t=0 rot=0 and t=120 rot=360 -- both timed -- so the rule returned 0 and THE FOCUS RING STOPPED SPINNING. Nothing reported it: a period of 0 is a legal "this element does not spin". Rewritten to take the SPAN between the two poses: 120 - 0 = 120 units, the same number the old rule produced, which is evidence the corrected layout is self-consistent rather than merely different. Verified the way P5 verified it, by bit-identity one period apart on the ring's own 60x60 box so the ptloop sweeps cannot confound it: 0 at +120 units (twice), 8.61 at a quarter period, 8.88 at half. Three wrong instruments on the way, and the sequence is the lesson. A whole-frame `max` saturates on one rotating edge (adjacent frames scored 131 with a mean of 0.022). A live --menu filmstrip jitters by up to a frame, which is ~3 degrees of ring. And a whole-frame comparison is dominated by the sweeps, which move 480 px over one ring period. `--focus=<id>` was added so a --screen run can draw a focus record deterministically, which is what made the check reproducible. THE PLATE'S PERIOD IS NOW 105, THE DISC'S OWN GROUP LENGTH, and it disagrees with the measurement. The ambiguity the entry carried is gone -- it used to say the cycle might restart at t=6 rather than 0 and that nothing separated them; the group now runs t=0 to t=105, both at alpha 0, and there is one reading. But 105 units is 1.750 s, or 1.906 s scaled by the factor the ring shows between its declared 120 and its measured 2.177 s -- about 17% below all four corpus timings (2.12 / 2.19 / 2.34 / 2.31). The old 129 gave 2.34 s, at the top of the range, which is why it looked right. 129 was the last timed keyframe plus exit_ramp_units, and that constant is deleted. A period built on a constant that no longer exists cannot stay even though it fitted better, so the port ships the disc's number and says it is wrong. Verified bit-identical 105 units apart, 0.83 at 30 units. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
5dbc9aeac0 |
port: delete exit_ramp_units, invert the format's own rule, and guard a scale-0 leaf
FOUR THINGS, and the first is what MISSION section 3 calls the measure of
progress.
DELETED `exit_ramp_units` AND `exit_ramp_seconds`. They were authored because the
disc had no time slot on a group's final keyframe, so the ramp into it was the
one unknown duration per screen. Under the corrected record layout that keyframe
does not exist -- a group is an 8-byte header then frames x {u32 time; 36-byte
pose} and every pose is timed. VERIFIED DEAD BEFORE DELETING: setting it to 9999
(166 s) moved the boot's transitions by 0.04 s, which is wall-clock jitter, and
both uses in ScreenView are gated on a condition that no longer fires on any of
the export's 866 keyframes.
INVERTED THE FORMAT'S OWN RULE. `check.rs` enforced "the final keyframe has no
`t`; the disc has no time slot there" and FORMAT.md stated it. Both are now
backwards, and the validator fired 150 times on a re-export. I had not run
`check` between pinning the tag and measuring against the oracle -- the pixel
harness was green while the format validator was failing on every screen with a
multi-keyframe group. A correctness harness does not replace a format one; they
fail at different layers.
GUARDED A SCALE-0 LEAF, which the Decoder hit in its own renderer: its leaf
branch marked the element drawn unconditionally while the blit returned early on
zero scale, so a scale-0 leaf suppressed its parent and blanked the element --
live on all four loading screens. This port did not have the bug only because
authored/rendering.json happens not to list pgloading_loop5. That is an accident
of a gate written for another reason, not a defence, so `_draw_leaf` now reports
whether it drew and `_draw` falls back to the parent.
ISOLATED THE PACING QUESTION rather than leaving it as a suspected regression.
Legacy association: publisher 4.70 agrees, developer 3.92 DIFFERS. Corrected:
publisher 4.26 DIFFERS, developer 3.62 agrees. Both misses are ~0.03 s outside a
composite bound. The association traded which screen is marginally out; it did
not regress the pacing.
Bumped the pin c -> d for the parser and audio changes. Its headline renderer
change does not reach this port: sylpheed-cli builds from the workspace crate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF
|
||
|
Sylpheed port agent
|
9f6959c7ca |
port: implement the decoded leaf composition -- and it does not close the 1.82%
The Decoder decoded the rule I refused to guess: draw the leaf on its own timeline, do NOT multiply the parent's alpha in. Multiplying is refuted rather than unsupported -- at the fitted time the parent has expired, so leaf x parent predicts zero for both quads and the sweeps would be invisible. They are drawn. Implemented: `_draw_leaf` runs the leaf unclamped, like the spinning ring and for the same reason -- held at its own rest.t the leaf sits at x=1521, entirely off the right edge, so `holding` would delete the sweeps rather than settle them. AND IT CHANGES NOTHING MEASURABLE. The title is still 1.82% against the oracle: 1.82 at t=261, 1.81 at t=355, 1.79 at t=420. At t=355 my interpolation puts the leaf's top-left at x ~ -324, off-screen left, where the Decoder's model puts the quad's CENTRE at 981. Those cannot both be right, and it is not something to tune away -- it is a disagreement about how the leaf's keyframes become a placed quad, most likely in the pivot and the rotation about it. Handed back with both numbers. So: the exporter no longer drops the data, the composition rule is implemented as decoded, and the port's largest oracle gap is exactly where it was. Fixing the export was necessary and not sufficient. TWO FLAGGED ELEMENTS DELIBERATELY NOT DRAWN, in authored/rendering.json with reasons. title_jp/ptlogo_eff2 (parent 125%, leaf 100%) is the same shape and is the element DECISIONS has recorded since P1 as the largest render disagreement -- but the Decoder said plainly "I have not tested it", and drawing it would extend a decode past the case it was fitted on. pgloading_loop5's leaf is scale (0,0), and scale-0 is one of the three historical failures this corpus names. Neither can be adjudicated here: title_jp has no oracle capture, and verify-screen compares against a renderer that draws no leaves at all, so ANY leaf drawing increases that divergence whether right or wrong. Its max went 155 -> 232 when they were drawn, and that number is not evidence in either direction. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
8bb9238632 |
port: the title residual is a horizontal redistribution, and three of my own explanations are dead
`title` is the port's largest disagreement with the oracle at 1.82%, and last iteration I attributed it to the moving ptloop sweeps without checking. Wrong, and so were the two hypotheses I formed after it. NOT THE SWEEPS. ptloop01/02 are 399x180 at (441,270) -- small and central -- and their exported keyframes hold pos, scale and rotation constant. The difference peaks at x~1088. NOT AN OVER-HELD ELEMENT. Added `--no-hold` to render the alternative: playing the title's groups past rest fades the screen to black by t=5.2 s, 30.97% differing against 1.82% held. Holding at rest is right. NOT A TIMING OFFSET. Sweeping the build-in gives 24.05% at t=1.6 falling monotonically to 1.68% at t=4.18 and 1.82% settled. The capture is at the settled end. WHAT IT IS: a horizontal redistribution. Signed difference by cell shows the port DARKER centre-left (-13.1, -8.3, -6.6) and BRIGHTER right (+16.0, +9.9), nearly cancelling -- whole-frame means 63.8 against 62.5. Brightness in the wrong place, not a level error or a tone ramp. It falls in the rows spanned by the two wide elements ptlogo_back2 (1118x262) and ptlogo_back2eff (1133x280), with the column profile falling off past x~1152 against their right edges at 1189 and 1197. AND THE EXPORT CARRIES NO BLEND MODE. ptlogo_back2eff's keys are declared, id, index, keyframes, kind_raw, layer, layer_source, pivot, rest, role, sprite -- there is no blend field, in this element or in FORMAT.md at all, and the port composites everything with normal alpha. If the game draws `_eff` layers additively, a wide gradient sprite would produce exactly this signature and nothing in the export would reveal it. Asked, not assumed; I have not tested it, and I am recording it because the three I could test are dead. Recorded and NOT acted on: pteff02's rest.t is 46, where its fade is 25% black, while its own group reaches 0x00000000 at t=236 -- so the port holds a black veil the timeline removes. Third instance of rest.t naming a hold that is not the settled state. It does not explain the residual: removing a darkening veil would make the port brighter still, and it is already brighter where it disagrees. `--no-hold`'s first version set the flag thirty lines before `view` exists and silently rendered nothing, caught because the loop found no files rather than because anything reported an error. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
7c918006e8 |
port: the PRESS (A) plate pulses -- authored per element, because 82 of 212 share its shape
The human listed pulsation as first-class and the port drew nothing: the plate's focus record `ptbtn00f` was never reached, because press_start has no `buttons` and nothing is focused. That it LOOPS is measured -- the corpus timed the period four times (2.12 / 2.19 / 2.34 / 2.31 s) and you cannot measure a period unless the thing repeats. THE RULE I WAS GOING TO WRITE DIED IN THE CENSUS. The spinning ring is a rule in the renderer because it has a disc-wide check: 16 of 212 elements match its shape and all 16 are focus rings. The analogous shape for a pulse -- keyframes varying only in alpha, first alpha equal to last -- matches 82 OF 212, including ptcopyright, palogo_sqex, ptmsg and every _eff fade. A renderer rule on it would make the copyright notice pulse. Narrowed to focus records it matches exactly one distinct element, and a rule justified by n=1 is a special case wearing a rule's clothes. So it is a LOOKUP in authored/timing.json keyed <screen>/<element>, with the census recorded beside it so nobody widens it later. The period is 129 units -- the element's own group under the port's existing model: last timed keyframe t=105 plus the authored exit_ramp_units of 24. No new constant. 2.150 s at 60 units/s, 2.295 s at the ~28.1 fps the emulator presents, against measurements of 2.12-2.34. IT IS A CHOICE AND THE ALTERNATIVE IS STATED: restarting at the group's first keyframe (t=6) instead of 0 gives 123 units = 2.050 / 2.189 s, also inside the measured spread. Nothing separates them. t=0 is taken because it is where every other group starts -- consistency, not evidence. Verified the way the ring was, by bit-identity one period apart. 20 periods is 43.00 s = exactly 172 film frames: frames N and N+172 differ by 0-1/255, while the control a quarter-second off (43.25 s) differs by 58.7/255. On the held boot title the glow-box mean swings 26.0 <-> 37.7. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
53a93e2e9e |
port: the intro had no dialogue because the voice is a separate asset, and I concatenated it wrongly first
A human play-test heard music under the boot intro and no voices. The obvious reading -- the 5.1 fold dropped the centre channel -- is wrong. `ADV.wmv` carries music and effects only; a cutscene's voice is a separate continuous XMA stream in `sound.pak`, bound to the movie by the manifest in `tables.pak`. Nothing was dropped. The exporter had never been asked for it, so every fidelity measurement in AUDIO-VERIFICATION.md would have come back clean. `audio::export_voice` resolves it with `media::resolve_movie_voice_region` and never by filename: `RT01A`'s voice lives inside `VOICE_ADV.slb`, so a name match is correct on exactly the two movies this port would have spot-checked. Decoded, not authored -- so it runs outside the `authored/audio.json` block. THE FIRST VERSION CONCATENATED THE REGION'S CHUNKS AND WAS WRONG. It produced 359 s of dialogue for a 137 s movie. Decoding and timing each chunk shows two of them equal to six decimals and each spanning the whole movie -- HANDOFF Q10's decoded two-stem shape on a second asset kind -- so they are summed at 1/n. The error was visible only because the first version recorded the decoded length against the movie's instead of clamping to it; the clamp `media`'s own doc comment invites, and which `sylpheed-viewer` applies, would have produced a file of exactly the right duration containing the wrong audio. The dropped leading chunk matches no duration in its region and is NOT closed here. It is the same signature as `BGM_103`'s third sub-wave, already open in BLOCKED.md, now corroborated on an independent asset kind. Raised with the Decoder; the manifest names every chunk dropped and its length. Also in this commit, and separable: * `--skip-at=SECONDS` -- `--script` structurally cannot press during a movie, because `_script_settled` waits while `_player != null`. That is why "does (A) skip the intro" had been read out of the source rather than measured. * MISSION section 6 pins a 5.1->stereo matrix and this exporter has shipped a different one since P4 -- the same weighting, 7.65 dB quieter -- and said so nowhere. Re-measured with the right instrument (float decode, whole file, count the samples that would clamp, not a peak reading): the pinned matrix puts ADV at +4.26 dBFS on 4406 samples, while S00A never clips. So the pin overloads one movie and the constant is over-broad for the other. NOT changed -- the level of a mix is what section 6 reserves to a human. The export now carries a warning with the numbers. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |