c184a4f8ab5060df13636456d962d1b7e08e2010
951 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sylpheed port agent
|
c184a4f8ab |
port: check-capture passed a file that was 36% holes -- it now catches starvation
The Decoder diagnosed take 2 as a STARVED capture and I verified it here rather
than take it on trust: 35.6% of frames silent on all six channels, 10482
alternating runs, median burst 13.5 ms and gap 3.9 ms, a 17.4 ms period at 57 Hz.
Their untruncated original reads 39.3% and 10595 runs; the difference is exactly
the truncation and every other number agrees.
So my rebuilt correlator was working correctly on a file that could not carry the
signal. The alarming reading it produced -- that the game may not play the .wmv's
WMA track, so ADV.ogv's audio has been wrong since P4 -- is NOT SUPPORTED by this
capture and is not refuted either. Withdrawn as a concern arising from evidence,
with nothing changed in either direction. It was the most expensive-to-act-on
hypothesis in the port and it came from a file that could not speak to it.
THE REAL DEFECT WAS MINE: `check-capture` tested only for duplicated channels, so
it cleared a recording that was 36% holes. A provenance check that passes the
artefact it was built in response to is not a check.
It now measures starvation, and TWO THRESHOLDS I INVENTED WERE BOTH WRONG:
counting exact-zero frames -- real audio crosses zero constantly, so a clean
voice track scored 5947 "gaps" of median 0.0 ms and was called starved. A gap
is a RUN, not a sample; only runs over 1 ms count.
gap count and median length -- a genuine music bed shows 454 gaps at a median
of 1.4 ms, because quiet 16-bit passages really are zero for milliseconds.
What separates them is the RATE: 32.9 gaps/s starved, 3.3 for a real bed, 0.03
for a voice track that is 53% pauses. Bar at 20/s, derived from those controls
rather than chosen and then justified. Controlled both directions: real stereo
bed PASS, six distinct tones PASS, starved capture FAIL. It also reports a `data`
chunk declaring 0 bytes -- what a file copied mid-write looks like, which is what
happened.
VOICE CHANNEL ROLES ARE NOT OBTAINABLE THIS SESSION. Both routes closed: the
monitor sink is starved by construction, and the internal tap at
SDLAudioDriver::SubmitFrame needs a Canary rebuild the Decoder has costed at a
whole session. That is the human's call, not an agent's. The port keeps authoring
with the known recorded.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF
|
||
|
Sylpheed port agent
|
ff04fbce52 |
port: the menu music was 3.52 dB quiet -- a bank header was being summed as a stem
Checking my export against the Decoder's declared XMA1 durations turned up a
defect of mine that has been shipping since P6.
`export_bgm` summed every sub-wave `media` returned and scaled by 1/n. Decoded
and timed, all three banks have the same shape:
BGM_103 sub-wave 0: 10300 B -> 0.009 s, peak -inf 1: 87.744 s 2: 87.744 s
BGM_102 sub-wave 0: 10300 B -> 0.009 s, peak -inf 1: 37.482 s 2: 37.482 s
BGM_001 sub-wave 0: 10300 B -> 0.009 s, peak -inf 1: 173.809 s 2: 173.809 s
Sub-wave 0 is DIGITALLY SILENT in all three, and 10300 B is 10240 plus a 60-byte
RIFF wrapper -- 10240 being exactly the bank header the Decoder's census
identifies. Counting it in the divisor put every real stem at 1/3 instead of 1/2:
3.52 dB on all the menu music since P6. Dropping a silent input is arithmetic,
not a decoding decision. Measured after: main_menu.ogg -7.69 -> -4.20 dBFS,
+3.49 dB against 3.52 predicted.
THIRD INSTANCE OF ONE DEFECT: a silent chunk in the voice sum, a silent channel
in the mono fold, now a silent sub-wave in the music sum. Each invisible to every
check except a level, and each time the divisor was computed from how many inputs
there are rather than how many carry signal. That is the shape, not the bug.
Closes a red row open since P6 -- "sound_bank_riffs returns three sub-waves where
Q10's census says two". The census was right, and this corroborates the Decoder's
|
||
|
Sylpheed port agent
|
6210c2e131 |
port: my correlation instrument failed its own control -- the negative had to be re-earned
Take 2 is a good file: it passes check-capture (I re-ran it rather than cite the Decoder's run), carries a screen log, and was recorded with the sink's channel_map set equal to Canary's own. BEFORE REPORTING A SECOND NEGATIVE I ASKED WHETHER MY METHOD COULD DO THE JOB, by building a synthetic mix -- the bed plus the three voice streams -- and hunting the bed inside it. It failed: r=0.415, against the r>0.8 bar my earlier negatives were judged against. So the instrument that produced "the capture contains no ADV audio" could not have found ADV audio in a mix even when it was certainly there. That conclusion was right -- the Decoder's tone control proved take 1 corrupt independently -- but it was right BY LUCK and I reported it as measurement. The three controls I was pleased with tested that the method finds a clean signal in a clean reference, which was never the task. REBUILT AND CALIBRATED IN BOTH DIRECTIONS. Band-limit so the target dominates, then judge on LAG and MARGIN rather than absolute r -- r>0.8 is correct clean-against-clean and meaningless for a component in a mix. bed, 40-180 Hz in a mix containing it r=0.663 lag 0.0 s margin +0.111 bed, 40-180 Hz against a voice-only mix r=0.262 lag wrong margin +0.005 voice, 300-3000 in a mix containing it r=0.810 lag 0.0 s margin +0.248 voice, 300-3000 against the bed alone r=0.358 lag wrong margin +0.005 A 20-50x separation in the discriminating statistic. Written up as AUDIO-VERIFICATION.md section 6, retraction included. THE NEGATIVE NOW STANDS ON SOMETHING. All six of take 2's channels, against both targets, sit in the known-absent regime: margins 0.000-0.017, lags scattered from -72 to +255 s. Take 2 contains neither the movie's WMA bed nor the cutscene voice. Two captures, differently configured, the second provably free of the channel-map fault, with a screen log saying the movie was on screen, and neither carries either source. Handed back: a capture path still losing the mix, or the guest not emitting these sources during the movie, and only one side of the wall can tell those apart. If it is the second it reaches the port directly -- the export's movie audio comes from the .wmv's WMA track. Also noted: the message gives 253.3 s, the file is 318.539 s. The screen log agrees with the file, so it is a mis-stated number, but a length quoted in a provenance claim should match the artefact. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
f23180c4eb |
port: a capture must pass a provenance check before anyone analyses it
The 6-channel capture I spent an iteration refuting was corrupt, and the Decoder found the cause: PulseAudio remapping between two mismatched channel maps, where a 6-channel remap SILENTLY DROPS AND DUPLICATES. Its control -- six channels, six tones, same sink, same parec -- came back 400/3200/200/800/800/200 for an input of 400/800/200/1600/3200/6400. Two source channels gone entirely. So the negative was right, and the byte-identical pair I reported was the thread that unravelled it. Worth recording precisely, because it nearly went unreported: it began as an idle look at two channels whose peak AND RMS matched to six decimals, and it only became evidence because a coincidence at six decimals is cheaper to hash than to explain. `tools/port/check-capture` makes that check one command -- split the file, hash every channel, fail on any duplicate pair -- and AUDIO-VERIFICATION.md gains a section 5 saying to run it FIRST, every time, plus the two conditions the same incident produced: start the recorder before the process, and log what was on screen against the recording's own clock so a miss is diagnosable. Controlled both directions, because a checker nobody controlled is what this incident is about: six distinct tones PASS; the remap's own output pattern FAILS naming all four pairs; the corrupt capture FAILS on ch2 == ch5. THE KNOWN-BAD CONTROL IS THE POINT. All six of its channels report a peak of -18.063656 dB, identical to six decimals, while containing three duplicate pairs. A level check cannot see this failure. That is why the tool hashes rather than measures, and why the corrupt capture's "plausible per-channel levels" were never evidence. The tool says of itself that it is necessary, not sufficient. Withdrawn with the file, both the Decoder's: "all six channels carry signal", and the non-zero-surround observation offered as weak support for 5.1. Unaffected: the three-XMA-context concurrency result, read from the emulator's log rather than the audio path, on two independent boots. The corrupt file is dropped from the exchange so the next agent cannot pick it up and repeat the work. Nothing in the export changed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
018e879907 |
port: the oracle capture does not contain the intro -- a controlled negative
The Decoder took the capture I asked for and described it as the full mix, the
movie's WMA track plus the three XMA streams. It contains none of them.
Envelope cross-correlation, sliding with overhang, normalised over the overlap,
minimum 30 s of overlap so a short window cannot win on an edge. Against the ADV
bed, against each of the three voice streams, against BGM_103 and against S00A,
every pairing is a PLATEAU rather than a peak: best-to-runner-up margins of
0.001-0.016. The margin is the number that matters, not r.
Three controls, because a negative from an uncontrolled instrument is worthless:
the instrument finds matches on this data -- bed vs bed r=1.000 margin +0.115,
voice stream 2 vs stream 3 r=1.000 margin +0.300;
my reference really is the movie -- the .ogv transcode against the disc's own
ADV.wmv, r=1.000 margin +0.114, so a miss is not my transcode;
drift is excluded -- a stretched playback would still match locally with the
best lag climbing monotonically, and 5 s windows give 4.95, 15.30, 119.35,
50.75, 29.35, 83.95 s, scattered across the movie.
WHAT IT IS has been handed back rather than guessed. It is 70 s of something,
all six channels carrying signal at RMS about -27 dBFS, matching nothing this
port exports. Diagnosing it is the other side of the wall.
One measurement that may help: split as 5.1, channels 3 and 6 are BYTE-IDENTICAL
-- same MD5, not merely the same peak and RMS. An exact duplicate pair inside a
six-channel surround output is consistent with the Decoder's own warning that the
6-channel frame is Xenia's hardcoded kFrameChannelsDefault rather than the
guest's request, and weakens any reading of that file as evidence of a 5.1 mix.
THE VOICE EXPORT IS UNCHANGED: still one stream of three, still marked red in the
manifest, the console line and authored/audio.json. A failed measurement should
change nothing, and what would have been wrong is treating an expensive recording
as an oracle because it was expensive.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF
|
||
|
Sylpheed port agent
|
8fba7944d4 |
port: the game decodes all three voice streams at once, and two baseline rows were comparing blank frames
TWO FINDINGS, one mine and one handed to me, and the second retires a premise I built on twice. THE P1 BASELINE HAD ROWS THAT PROVED NOTHING. `build_12` and `build_15` render pure black in BOTH renderers -- mean 0, max 0 -- so the difference is zero and `verify-screen` scored them `max 0 over3 0 OK`, the strongest verdict it has. Two of sixteen rows were comparing nothing against nothing. Worse than a missing test, because a missing test is visible in the count. Cause isolated by a control, not by reading: `build_00`/`build_01` are the same loading screen minus three elements and render fine (mean 1.913, max 214.5). The dressed variants add `pgloading_eff00`, a 1280x720 primitive resting OPAQUE BLACK at t=38 inside its own opening black hold, with no layer key so paint order puts it last. The rule I was about to write -- "rest.t before the last timed keyframe is the pathology" -- was killed by running the census first: 152 of 212 elements in this export have rest.t earlier than their last timed keyframe. It is the norm. What is actually unusual is the CONTENT, and its reach is one: `pgloading_eff00` is the only element in the export whose resting pose is a fully opaque full-frame quad. One instance is not a rule, so the renderer is unchanged and the HARNESS is fixed: a blank pair now reports BLANK -- both renderers drew nothing; this row proves nothing. `status` is untouched, so an unrelated DIFFERS still fails. THE VOICE EXPORT IS KNOWN INCOMPLETE. The Decoder booted Canary with --xma_param_probe and the game decodes ALL THREE streams CONCURRENTLY, in three XMA contexts whose byte sizes match the disc payloads exactly. So "three presentations of one take, pick one" is refuted by the running game and the question I had been arguing -- WHICH presentation -- has no answer. This one no census could have caught. Every measurement was right: the streams are equal-duration, one is silence, one is 0.60x another with the residual 26.8 dB down. The frame around them was wrong, and the file says ChannelMask 0x0002 on all three. It took the running game -- which is the mission's own sentence arriving in practice. BEHAVIOUR HELD DELIBERATELY. An equal-gain 1/n sum of channel pairs is not a downmix either -- MISSION section 6 pins an explicit matrix for exactly that reason -- and summing cost S00A 6.02 dB when one stream was silence. Swapping one guess for another on a message is what produced this entry twice. What changed is that the wrongness is now LOUD, because this failure sounds like success: one stream is clean audible dialogue. A top-level manifest warning per movie, the console line, and the authored entry all say `1 of 3 streams`. "They are 5.1" is recorded as the Decoder's HYPOTHESIS with its own counter-evidence attached, and nothing builds on it. What settles it is asked: a recording of the game's own output over ADV through the null sink, which turns channel roles into a fit against an oracle. Refutation attempt, survived: the Decoder's loading-screen variant map. Entries 0/1 carry 7 elements and 12/15 carry those seven plus baseeff, eff00 and loop5 -- exact in count and identity, and it is what made build_00 a control. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
c43d44f57e |
port: withdraw the dual-mono generalisation -- the measurement stands, the rule does not
I argued `highest_rate` had no case because ADV's higher-rate presentation is dual-mono while its louder one is mono-in-stereo, so the extra bytes buy a duplicated channel rather than fidelity. The Decoder tested that disc-wide over the 28 three-stream cues: the stream-3/stream-2 size ratio runs min 0.0778, median 1.2565, max 2.9163, sd 0.5057, with only 12 of 28 within 15% of 1.0, and declared rates scatter with them. A 37x spread is not a duplicated channel. The CHANNEL MEASUREMENT STANDS -- ADV chunk 1 is mono-in-stereo and chunk 2 is dual-mono at -8.318574, this port's own decode, which the Decoder could not re-run and did not dispute. What fails is the step from one asset to the format. NOTHING IN THE EXPORT CHANGES. `loudest` is a per-asset content rule -- it reads the peak of the streams in front of it -- so a scattering structural ratio cannot undermine it. What changes is the REASON, in four places: authored/audio.json's presentation_why, the selector comment in audio.rs, BLOCKED.md's row, and DECISIONS.md. The honest statement is narrower: `highest_rate` was never refuted, it was never argued for, and neither is `loudest`. That is why the entry is marked CHOSEN rather than measured, and why one capture deletes it. Recorded on the pattern rather than just the instance: this is the third claim of mine in two iterations that generalised a single-asset observation, after "the chunks are two stems" and "everything the sequencer paces off rest.t is late". All three were true of the thing I looked at. The failure is reaching for the rule a measurement would imply if it held everywhere and writing that down in the same breath as the measurement. Also noted, not mine and not affecting export_voice: S12B's three streams are byte-size identical, and BIRD_224 is three-stream while not being a movie cue. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
2939c21b38 |
port: settle times measured -- the pacing was already right, and my own red flag was half wrong
THE TRANSCODE CACHE HAD NEVER HIT. `video::transcode` has carried one since P4 -- a `.cmd` sidecar with the command, the source size and the channel count -- and `main.rs` clears the output tree wholesale immediately before the check, deleting the sidecar and the file it stamps. Six exports in this session paid the full Theora encode and produced five byte-identical files, roughly 48 minutes. Nothing reported it, and nothing could: a cache is silent either way and the only symptom is a wall clock that looks like the job being slow. The wipe now spares `video/` and `prune_videos` deletes anything in it this run did not claim, so the wholesale guarantee is kept rather than traded. A re-export is 20 s. SETTLE TIMES, MEASURED, and they refute more of my row than they confirm. The principle holds -- the title's rest.t is 251 units = 4.183 s where its art finishes at ~2 s -- but "everything the sequencer paces off that landmark is therefore late" does not. Measured the port the way the game was measured, by VISIBLE SPAN rather than arrival-to-arrival: publisher wordmark port 4.25 s game 4.297 / 4.604 / 4.370 developer logos port 3.50 s game 3.508 / 3.503 / 3.366 black hold port ~0.25 s game 0.2 - 0.3 title -> plate port 2.000 s (declared 120 units) game 2.247 s Dead on. My earlier reading compared the port's transition timestamps against the game's visible spans, which differ by the exit ramp plus the black hold -- the whole of the discrepancy I was about to chase, and the same definitional trap that cost this corpus 0.48 s on the plate delay. Nothing in the sequencer is changed. `dwell_seconds` stays null, now for a measured reason rather than an absent one: `timing.json` said "if a capture ever times the real boot, this is where that number goes", and the answer is that nothing goes there. Not authored, deliberately: an (A)->menu dwell, which measures 3.763 s and contains a 1.53 s guest load stall on a cold cache; and the menu build-in and (B)->title, which rest on one run where the port is already within ~0.1 s. THE VOICE PRESENTATION MOVED TO authored/, because the recommendation behind it was withdrawn as self-contradictory and the choice is now unambiguously mine. `voice.presentation` = `loudest`, and the reason to switch is a measurement, not a preference: ADV chunk 1 is MONO-IN-STEREO and chunk 2 is DUAL-MONO, so chunk 2's extra bytes encode a duplicate channel rather than fidelity. That explains the byte-rate difference and removes the only argument for `highest_rate`. ADV's dialogue now exports at +0.3 dBFS instead of -8.7, which is the SE bound's documented decode overshoot on a wave mastered at full scale. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
29fd735b96 |
port: a voice region is three presentations of one take -- keep one stream, sum nothing
Third reading of the same bytes in one session, and the first one that is
decoded rather than inferred.
1. concatenate -> 359 s of dialogue for a 137 s movie. Dead on measurement.
2. sum as Q10's two stems -> refuted here: S00A's second full-length chunk is
DIGITAL SILENCE and ADV's is 0.60x the first with 26.8 dB of residual. That
claim was mine, and the Decoder had already adopted it before I tested it;
it is withdrawn in both places.
3. keep ONE stream. Decoded disc-wide by the Decoder, counting stream starts
inside every inter-descriptor span: 258 spans hold one stream, 28 hold
three, nothing holds two. So 359 = 84.55 + 137.32 + 137.32.
Summing was therefore wrong a third time, and for a third reason: a take plus a
0.60x copy of itself is ~4 dB louder and coloured, not a mix of parts. The filter
is now `[0:a]anull` plus the mono fold -- no gain applied at all.
`check` moves `voice` off the strict peak bound as a consequence. It sat with
`bgm` because it was a sum this exporter produced; it is now a single wave off
the disc, mastered near full scale -- ADV's louder presentation measures +0.0003
dBFS at source -- so refusing that would be refusing the disc's own mastering.
The leading chunk is dropped as a DUPLICATE, not a truncation. It is this
movie's own dialogue (the Decoder, 17 of 17) and I measured it to be the TAIL of
the kept stream: sliding envelope correlation r=0.998 / 0.932 with the lag flush
against that stream's end, controls 1.000 self and 0.289 for a different movie,
confirmed in the sample domain at 16.7 / 23.2 dB of residual.
STILL OPEN, and flagged rather than absorbed: WHICH presentation to keep. Highest
byte rate is the Decoder's recommendation and not a decoded field, and on ADV it
selects the QUIETER of two (-8.3 dBFS against 0.0). Said in the manifest with the
consequence, so it is visible and reversible. A capture of the intro with
dialogue audible settles it.
Not converted, and the Decoder has since withdrawn the ask with a better reason
than mine: its 504464 B anchor constant is structural, not proportional --
identical on all 17 regions, and a proportional prediction lands within 8 bytes
on ADV while being 4305 B out on S00A.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF
|
||
|
Sylpheed port agent
|
0e7fcc2dda |
port: fold only the channels that carry signal, and measure what the leading chunk actually is
TWO DEFECTS AND ONE MEASUREMENT, all from verifying the previous commit rather than from reading it. Channel 2 of both voice streams is DIGITALLY SILENT -- peak -inf over the whole file. The voice is a mono recording carried in a nominally stereo stream, and averaging it with silence cost 5.94 dB. The doc comment directly above the code that did it warned that "a stereo matrix applied to a mono voice track is not an error, it is a -6 dB attenuation that nothing reports", and then the code checked the DECLARED channel count instead of the content. `live_channels` now measures which channels carry signal and averages only those. Three defects this iteration were the same shape: a silent chunk in a sum, a silent channel in a fold, and a pan matrix naming channels that do not exist. Each is an input contributing nothing while still counting in a divisor, and none is visible in anything but a level. THE LEADING CHUNK IS THE TAIL OF THE FULL-LENGTH ONE. The Decoder settled by byte-span analysis that it is the movie's own dialogue, 17 of 17 -- killing its own hypothesis that it was an in-mission line -- and asked whether dropping it is a truncation, having no XMA1 decoder. Sliding envelope correlation with overhang allowed and normalised over the overlap: ADV r=0.998 at +52.8 s, S00A r=0.932 at +25.6 s, against controls of 1.000 (self) and 0.289 (a different movie). Both lags put chunk 0 flush against the END of chunk 1. Sample domain, lag refined to one sample then a scalar best-fit: residuals 16.70 dB and 23.15 dB below target. So dropping it removes a DUPLICATE and the exporter was right for a worse reason than it gave. The manifest note is NOT rewritten to claim that -- the structural conclusion belongs on the Decoder's page, not in my manifest -- but it no longer equates the chunk with BGM_103's third sub-wave, which a disc-wide census showed is a different structure, and it now says in words that the omission must not be read as junk removal. Not converted, deliberately: the Decoder's 504464 B anchor constant. Bytes per second is not constant even inside one region -- chunk 1 is 1118268 B and chunk 2 is 1171516 B for the SAME 137.324 s -- so any figure in seconds off it would be invented. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
7465e49c8e |
port: withdraw my own "two stems" reading of a voice region, and stop summing silence
The Decoder asked me to decode a voice region's leading chunk -- it has no XMA1
decoder in its container -- and the decoder run refuted a claim of mine that it
had already adopted into `docs/re/structures/voice-region-leading-chunk.md`.
I wrote that a region's two equal-length chunks are HANDOFF Q10's decoded
two-stem shape. Equal duration was a SHAPE match and I carried the music census
across on the strength of it. The content does not support it:
S00A chunk 2 is DIGITAL SILENCE -- 4497300 samples, peak -inf.
ADV chunk 2 is 0.60x chunk 1, best-fit scalar, residual 26.8 dB below the
target: about 95% of its energy is a -4.4 dB copy of the first chunk.
That cost real level. Summing chunk 1 with silence at 1/n put S00A's dialogue
6.02 dB down for nothing -- the exported file peaked at -16.2 dBFS against a
source chunk peaking at -4.2. `export_voice` now drops a digitally silent chunk
before the sum, which is arithmetic and not a judgement about content.
WHAT ADV'S NEAR-DUPLICATE SECOND CHUNK IS REMAINS OPEN AND IT IS STILL SUMMED.
Whether the game plays both is a decoding question, 26.8 dB of residual is not
nothing, and dropping a chunk because it correlates with another would be
answering it.
The leading chunk, answered as far as a measurement goes: ADV region + 1392, 394
packets, 84.553 s, stereo 48 kHz, peak -2.48 dBFS, 6 silent gaps over 0.4 s
totalling 45.3 s -- 54% silence, the same duty cycle as the full-length chunks.
Speech-structured, so not a header and not padding. "Cutscene or mission" is an
identification and this agent has no ears and no oracle; envelope correlation
peaks at 0.768 at the last lag in the search range, which is where a statistic
lands when it has found nothing, and it is not an answer.
Not taken yet, and said so in BLOCKED: the discriminator should be
`bank_header_len`, not a duration tie. This exporter never used `riffs.len()`, so
it already handles both of the Decoder's cases, but a tie is an observation and
`bank_header_len` is decoded. It switches when `c1f3608` reaches `main`;
`sylpheed-formats` is a path dependency and merging another agent's topic branch
is not the port's to do.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF
|
||
|
Sylpheed port agent
|
18412e6324 |
port: the voice is in the mix, proved by a null control that needed no test code
Three things verified against the re-export, none of them by reading the source. THE STEM READING IS CORROBORATED BY A NUMBER IT WAS NOT FITTED TO. Chunks are selected as "the longest, and everything tying with it" -- the movie's own length is not an input to that rule. The result now matches the picture to -0.114 s (ADV) and -0.085 s (S00A), where the concatenated version was +221 s and +161 s. THE VOICE REACHES THE MASTER BUS. `+ voice ADV` in the log proves only that a stream was found and played. The control is MODDING rule 4: 140 s of silence at data/mods/audio/voice/ADV.ogg shadows the exported file and changes nothing else, so no test-only flag was added to the runtime. The muted run reproduces the movie's own bed to 0.01 dB peak and 0.19 dB RMS; the unmuted run measures -22.913 dBFS RMS against -23.184 predicted for two incoherent sources at -24.941 and -27.965. 0.27 dB out. (A) SKIPS THE INTRO IN THIS BUILD. `--skip-at=25` ends the movie at 25.02 s through `Input.parse_input_event` and `_unhandled_input`, so the press-to-skip wiring is live and the play-test's report is not that bug. Untested here: a real key from a focused window. Unsettled anywhere: whether the GAME permits skipping an attract movie -- Q9, still amber, and if the answer is no this path is deleted rather than debugged. `check` accepts the new `voice` kind and holds it to the strict peak bound, with `bgm`, because it is a sum this exporter produced rather than a wave off the disc. FORMAT.md says what a `voice` entry is, that it keys by MOVIE NAME rather than by a role, and that its `why` names every chunk dropped. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
3aa74ea029 |
port: the intro had no dialogue because the voice is a separate asset, and I concatenated it wrongly first
A human play-test heard music under the boot intro and no voices. The obvious reading -- the 5.1 fold dropped the centre channel -- is wrong. `ADV.wmv` carries music and effects only; a cutscene's voice is a separate continuous XMA stream in `sound.pak`, bound to the movie by the manifest in `tables.pak`. Nothing was dropped. The exporter had never been asked for it, so every fidelity measurement in AUDIO-VERIFICATION.md would have come back clean. `audio::export_voice` resolves it with `media::resolve_movie_voice_region` and never by filename: `RT01A`'s voice lives inside `VOICE_ADV.slb`, so a name match is correct on exactly the two movies this port would have spot-checked. Decoded, not authored -- so it runs outside the `authored/audio.json` block. THE FIRST VERSION CONCATENATED THE REGION'S CHUNKS AND WAS WRONG. It produced 359 s of dialogue for a 137 s movie. Decoding and timing each chunk shows two of them equal to six decimals and each spanning the whole movie -- HANDOFF Q10's decoded two-stem shape on a second asset kind -- so they are summed at 1/n. The error was visible only because the first version recorded the decoded length against the movie's instead of clamping to it; the clamp `media`'s own doc comment invites, and which `sylpheed-viewer` applies, would have produced a file of exactly the right duration containing the wrong audio. The dropped leading chunk matches no duration in its region and is NOT closed here. It is the same signature as `BGM_103`'s third sub-wave, already open in BLOCKED.md, now corroborated on an independent asset kind. Raised with the Decoder; the manifest names every chunk dropped and its length. Also in this commit, and separable: * `--skip-at=SECONDS` -- `--script` structurally cannot press during a movie, because `_script_settled` waits while `_player != null`. That is why "does (A) skip the intro" had been read out of the source rather than measured. * MISSION section 6 pins a 5.1->stereo matrix and this exporter has shipped a different one since P4 -- the same weighting, 7.65 dB quieter -- and said so nowhere. Re-measured with the right instrument (float decode, whole file, count the samples that would clamp, not a peak reading): the pinned matrix puts ADV at +4.26 dBFS on 4406 samples, while S00A never clips. So the pin overloads one movie and the constant is over-broad for the other. NOT changed -- the level of a mix is what section 6 reserves to a human. The export now carries a warning with the numbers. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01N7FiFFFwbvG2uxdcEh8HyF |
||
|
Sylpheed port agent
|
16eef5fb2b |
port: file the keyframe-layout change and the loading-screen answer in BLOCKED
Neither is taken. The keyframe record layout (every pose timed, exit_ramp_units decodable) reaches me only when that branch lands on main -- sylpheed-formats is a path dependency and merging another agent's topic branch is not mine to do. The loading-screen names are answered but carry two of the RE agent's own amber flags plus the index-space problem I found, so no name is written yet. Recorded with what limits the risk: static composites are byte-identical across the keyframe change, so this iteration's verify-screen baseline is the control to re-run the day the pin lands. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WM5XL4HfrHuxz8RiMWdCMC |
||
|
Sylpheed port agent
|
9bd7297757 |
port: the P1 regression harness could not have run since the monorepo merge
verify-screen resolves its reference binary to a path build-reference-cli
stopped being able to produce: that script greps Cargo.toml for a
`Syplheed-Reborn.git", rev = "..."` pin, and
|
||
|
Sylpheed port agent
|
b37ad246ff |
port: implement MODDING rule 4, and withdraw a red flag that was my own bad measurement
MODDING.md calls base-and-overrides "a design constraint on the exporter today, not a milestone to add later". Nothing read `data/mods/` at all -- the directory has existed since the monorepo merge with a .gitkeep and no code path anywhere. Eight milestones shipped past it. ExportTree.resolve() now shadows by path, and every read goes through it: screens, sprites, cues, the music bed, movies. MenuAudio was reading tree.root directly and would otherwise have made audio the one asset kind a mod could not touch, for no reason a modder could have guessed. No manifest, no registration step -- the path IS the registration, which is the whole of the rule. One tree, not a stack: layering needs a load order and nobody has asked for one, so data/mods/README.md says that rather than inventing it. Every shadowed file is printed as it is read. The first version summarised in _ready, before any asset had been read, so it always said "nothing shadowed yet" -- a report structurally incapable of reporting anything, which is worse than none because it looks like an answer. data/mods/ was NOT gitignored, and that is a hole in a hard rule: a mod is usually an edited game asset, and this was the one directory a user is invited to put modified sprites in and git would have taken them. Now excluded except the README. Gate: a synthetic 203x43 magenta PNG (nothing disc-derived) at data/mods/sprites/title/main_menu/ptbtn01.png changes 8501 pixels in a bounding box of exactly 203x43 at the button's position, and `check` still passes. RAISED, NOT RESOLVED: MODDING.md says the tree is data/base/, PORT-MISSION.md §3 and the exporter and .gitignore say export/. Both are mission files and only the human changes a mission. REFUTATION on Q3's paint-order key: 2 of 16 screens did not match a stable sort by layer key -- but that was my test. pgloading_eff00.prm carries NO layer key (layer_source "none"): a primitive with no sprite header and no implied-name fallback. I sorted keyless first; the decoders put it last, which is right, since it is the full-screen black quad and HANDOFF's own sentence is that the fade quad paints last. Completing the rule to "keyless last" gives 16 of 16. SURVIVES. Recorded because the published claim does not say where a keyless element goes and there is one in the archive. Separately the tie-break's reach looks understated: 105 elements share a layer key across 12 of 16 screens, where HANDOFF characterises the cost as "one element's blend on one screen". WITHDRAWN, and it was mine: I filed "the runtime mix has no headroom" in red twice, off a peak reading. Measured properly it is 43 samples at full scale in 5.9 s and 24 in 98.5 s, longest run 0.25 ms -- the disc's own confirm cue on a transient, possibly only in the 16-bit save. Nothing changed, deliberately: attenuating would be an unmeasured level decision of the kind I refused for the loop point. A peak reading is not a clipping measurement. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WM5XL4HfrHuxz8RiMWdCMC |
||
|
Sylpheed port agent
|
0f8310e1fc |
port: say at the top of BLOCKED.md that it is the ask list, and that nobody reads it
The port's open asks have now been delivered by message three times and lost three times, because the decoder container was recreated each time and a message dies with it. The asks themselves were never lost -- they are in this file, with the HANDOFF sha each row came from -- but `docs/agents/decoder-loop.md`'s read list does not name this page, so a fresh decoder has no route to it. This does not fix that. It makes the page introduce itself, so that ONE pointer at it is enough for a session that has never seen it, and states the gap plainly where both agents and the human will read it. Changing the loop brief is the human's call and I have not touched it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WM5XL4HfrHuxz8RiMWdCMC |
||
|
Sylpheed port agent
|
29be5deddd | Merge remote-tracking branch 'origin/main' into auto/port-p6-audio | ||
|
MechaCat02
|
f5315ddf59 |
decoder: tell it about the reference assets, and that the DB can be wrong
The mounts landed but the agent could not learn of them: I documented them in CONTAINER-NOTES.md, which the decoder's prompt does not list, and then restarted the container -- so a fresh session with no memory of the exchange had a 586 MB database and a decompressed image sitting unmentioned in its filesystem. Now in the PROMPT itself, not only in a document, because the prompt is the one thing a new session is guaranteed to read. CONTAINER-NOTES.md is also added to its reading list. And the caveat that matters more than the asset. The .pe is PRIMARY -- the bytes the console executed. The database is somebody's ANALYSIS of them, produced by a disassembler that had to guess, and it is wrong in the ways disassemblers are wrong: misdecoded mnemonics where data was read as code, function boundaries short or long or merged or split, coverage missing entirely for code reached only by indirect dispatch, and names that are derived rather than symbols. So a finding resting on a database row is not established until the bytes agree: read the same address out of the .pe and check. Where they disagree the image wins, and the disagreement is itself worth recording, because it tells the next reader which parts of the database to distrust. A fast index into 9.2 MB of machine code, not a source of truth. |
||
|
Sylpheed port agent
|
7caa5c571c | Merge remote-tracking branch 'origin/main' into auto/port-p6-audio | ||
|
MechaCat02
|
d2d2592c92 |
decoder: mount the disassembly DB and the flat VA image
The decoder had neither, and reported the gap precisely: four scripts in this repo READ /work/xenia-rs/sylpheed.db and nothing produces it, so the whole static PPC route was consumers with the producer missing. Both exist on the host and are now mounted read-only: the 586 MB database (25 481 functions, 851 classes with RTTI, EH tables, imports, 1.8M indirect-dispatch candidates) and the decompressed image. The image is the more useful of the two. It is a FLAT VA DUMP -- file offset = VA - 0x82000000 -- so reading a known address needs no XEX decrypt, no LZX, and no booted emulator. The decoder had independently recovered the same bytes by dumping /dev/shm/xenia_memory_* and validating against the GamePart table, which is good work and a sound method, but it noted itself that needing a running emulator is a bad dependency for something the entire static corpus rests on. It does not need one. Also recorded that an earlier claim the .pe was STALE was tested and refuted, so nobody re-litigates it, and that instructions.raw is an INT rather than hex. Written down as reference material, explicitly NOT a deliverable: they are read-only, they come from outside the repository, and a fresh checkout elsewhere has neither. Reimplementing the producer belongs in sylpheed-formats, and until it exists every static finding rests on an artefact this project cannot rebuild. |
||
|
Sylpheed port agent
|
7a6a027fc8 |
port: P7 -- the new-game intro plays, and the two screens it skips are named out loud
S00A has been exported since P4; what P7 needed was something to play it and a
defined place to land. Both are here, and the interesting part is the gap.
The real chain is NEW GAME -> DIFFICULTY -> SELECT DATA -> (A) on a save slot ->
~4.5 s -> S00A. DIFFICULTY and SELECT DATA are MEASURED destinations that are not
GP_TITLE builds, so no screen file exists to go to. The port jumps from NEW GAME
to the one thing in that chain it has -- and the whole design is about not
letting that read as a sequence:
* MenuFlow.accept returns a new kind, `video`, rather than folding this into
`blocked`, because the caller has to announce the skip and a distinct kind is
what forces it to;
* the runtime prints the skipped screens by name on every run;
* flow.json carries `skipped_chain` as DATA, so what is missing lives beside
the decision instead of inside a GDScript string.
After the movie the port returns to the title. Authored, and it has to be: the
game goes into mission 1 and gameplay is out of scope. The ~4.5 s before the
movie is left EMPTY on purpose -- GP_TITLE does carry a loading screen and 4.5 s
is about the right shape for one, which is exactly why that belongs in BLOCKED.md
and not in flow.json.
`--script`'s 20 s per-step timeout would have killed every movie run at step 1.
Raising the constant would have been wrong the other way: a movie stuck at frame
0 would then hang the job, and a job that waits is worse than one that fails. The
test is now LIVENESS -- while get_stream_position() advances the deadline moves
with it, and a stalled movie still trips the same 20 s.
Found while looking: GP_TITLE's four unnamed builds (entries 0, 1, 12, 15) are
LOADING screens -- every element in all four is pgloading_*, and LOADING is one of
the three names the decoder read out of the title part's state function. NOT
renamed here: which member of each pair is which locale is an inference, and a
name stops being questioned once written. Handed over.
One of them is a second casualty of the rest.t problem, and a worse one:
pgloading_eff00.prm rests OPAQUE BLACK at t=38, so anything drawing that screen
at its declared rest paints a black rectangle over all of it. The title's case
only dimmed a frame.
REFUTATION, attempted and SURVIVED: HANDOFF says "exactly the six screen builds
carry the black .prm quad while the six overlays do not". Counting bundles with a
full-screen black primitive gives 8 and 4 -- build_12/15 carry one too. But
theirs runs black -> held -> clear where the transition quad runs black -> clear
-> black, so read strictly as "the quad whose group is the transition" the claim
holds. Recorded anyway: there are two kinds, and the naive census over-counts.
Gate: NEW GAME -> S00A plays 93.75 s against a declared 93.9 -> title, with
98.453 s recorded off the Master bus. What that does NOT show is that S00A's own
audio is in the mix -- bed and movie were not separated in this run, and the
write-up says so.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WM5XL4HfrHuxz8RiMWdCMC
|
||
|
Sylpheed port agent
|
1f1fe647f2 |
port: end the boot when BOTH builds have arrived, not when the plate lands
Moving the plate onto the shared clock moved the boot's exit with it: the run quit at the overlay's settle (t=238) while build 4's own fade-in from black runs to t=261. pteff00 is still ~7 % opaque there, so the capture came out visibly darker than the previous one -- with nothing failing, no warning, and no line in the log to say why. Caught only because there was an earlier capture beside it. The boot now ends at max(view.settle_time(), overlay.settle_time()) and prints the unit it is waiting for. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WM5XL4HfrHuxz8RiMWdCMC |
||
|
Sylpheed port agent
|
c225852fb3 |
port: the ring spins, the plate needs no constant, and rest.t was never the settle
Two milestones' known-wrong bits, both now answered by the RE agent, both taken. P5 -- the focus ring. It was drawn at 0 with a comment saying so. The period is now measured (continuous spin, eight evenly spaced autocorrelation peaks over nine revolutions, no angle estimated anywhere) and it needs NO authored constant: the period is the element's own declared t=120, and what the measurement adds is only that the turn repeats rather than stopping -- which "groups hold" could not decide, because 0 and 360 are the same pose. `spin_period_units` is structural and narrow on purpose: two keyframes, differing in nothing but rotation_deg, by a full 360, first timed and second untimed. 16 of 212 elements in this export match and all 16 are focus rings, zero false positives. That check is the point -- the measurement was taken on ONE button of ONE screen, and a rule that caught anything else would be extrapolating it to elements nobody watched. Verified on the port's own render with the RE agent's own control: bit-identical one period apart across the whole frame, 3.6/255 inside the ring's box at quarter-period steps, and box luminance conserved to 0.027 % over eight phases -- which is the observable they used to separate rotation from a pulse. Not claimed: direction (no signed angle was ever measured) and phase across a focus change (their run held focus throughout). P3 -- the plate. Last iteration I refuted their authoring instruction and shipped it anyway rather than pick between two of their numbers. The refutation held and the answer came back better than either option I offered: AUTHOR NOTHING. Both builds run on one clock started together and the plate arrives at its own declared t=238. The 2.13 s constant is deleted. The premise that failed was mine: rest.t IS NOT WHEN A SCREEN SETTLES. It is the last hold keyframe before the exit. ptlogo1 stops MOVING at t=42 and then creeps 5 px and 31 alpha steps to t=251. Reading rest.t put build 4's arrival at 4.350 s instead of 1.967 s, and the "2.51 s, which is not a landmark of anything" I sent them is that error wearing a decimal point. 238 - 118 = 120 units = 2.000 s against a measured 2.135 s at 28.1 fps presentation. Checked against my own export before touching anything. `ScreenView.settle_time()` still uses rest.t, and so the boot sequencer paces every screen off the wrong landmark. NOT changed here: "visible arrival" is a heuristic and getting it wrong re-paces everything. Filed, and asked for a timed boot instead now that their oracle is live. REFUTATION: two of their pages measure the same declared 120 units of wall clock during a static hold and disagree by 2 % -- plate 2.135 s (28.10 fps implied), ring 2.177 s (27.56 fps). That is seven times the plate page's own 6 ms run-to-run agreement, and it lands on the argument that page uses to justify itself: "the build-in is where frames are dropped; the static hold is not". Also the ring page's band, 27.6-28.8 fps, does not contain its own measurement -- the mean needs 27.56 and four of seven spacings are outside. Filed, not worked around: my port uses the declared 120 units either way. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WM5XL4HfrHuxz8RiMWdCMC |
||
|
Sylpheed port agent
|
9b30fb5933 |
port: P3 -- the boot title gets its PRESS (A) plate, and two of the RE agent's numbers do not agree
ScreenView now draws two builds at once, which it never had to before. It is a second ScreenView in the same SubViewport rather than a subordinate screen inside one: each build has its own timeline, its own textures and its own hold, which is the entire content of the finding, and Node2D siblings already paint in tree order. `paint_order` still means what it meant -- an ordering WITHIN a build. The delay is authored in flow.json on the BOOT STEP, not on the `title` screen. What was measured is the boot title; whether the plate is there when the title is reached again -- (B) from the menu, or after the attract movie -- is not, and hanging it on the screen would quietly claim that it is. REFUTATION, and it is the substance of this commit: the RE agent's authoring instruction does not reproduce the RE agent's own measurement, and the gap is 3.97 s. The instruction is "when build 4 has settled, wait 2.13 s, composite build 2". But build 2 has a group and this port plays groups -- ptbtn00 is alpha 0x00 at t=214, still 0x00 at t=236 while it slides 10 px up, and 0xff only at t=238, which is 3.967 s at 60 units/s. So the plate is first VISIBLE at settle+6.10 s, while what was measured -- the glyph counter leaving 154 -- is visibility at settle+2.13 s. Both groups starting together puts it 0.38 s BEFORE settle; build 2 starting at settle puts it at settle+3.97 s; landing on the measurement needs build 2's group to start 2.51 s after build 4's, which is not a landmark of anything. The measurement is untouched -- it is an observation of the running game and I have no standing to doubt it. What is refuted is the step that turns it into an authoring rule. So the port ships the instruction, prints the discrepancy on every boot, and files the row. Same call as the BGM sub-waves: a port that quietly picks the number that looks right destroys the evidence, because a corrected boot looks exactly like a correct one. Also refuted, and it was mine: BLOCKED.md has said since P2 that "no element's alpha reverses direction anywhere in this export, so nothing pulses". ptbtn00 reverses -- 0x00 -> 0xff -> 0x00 -- and it was in the export the whole time. The claim had been checked against the screens P2 happened to be animating. The port still draws no pulse, because no reading of this group yields the measured 2.24 s: the whole group is 4.47 s and from its first keyframe 0.90 s. Gate: `--boot --capture=` writes one frame of the composited end state, instead of the 600-PNG filmstrip that was previously the only boot artifact. `--screen=title --overlay=press_start` raises the same composite in two seconds for anyone who does not want to sit through 137 s of Theora. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WM5XL4HfrHuxz8RiMWdCMC |
||
|
Sylpheed port agent
|
d6252481e1 |
port: P6 -- the menu has sound, and the BGM I "chose" was decoded all along
The three Static.slb cues and the menu bed now export to Ogg Vorbis and play.
`sylpheed_formats::media` does the assembly; nothing in port/ has heard of XMA.
Three things this milestone got wrong before it got right, all recorded in
docs/port/DECISIONS.md because the corrections are the useful part:
1. The cue offsets were a Rust `const` in the exporter. They are MEASURED, not
decoded -- a measured value compiled into the exporter is a measurement
wearing the costume of a decoded field, and nobody deletes it because nobody
can see it. They are authored/audio.json now.
2. I picked BGM_001 and wrote a careful `why` calling the choice arbitrary. The
menu's music is BGM_103, and it is in HANDOFF at
|
||
|
Sylpheed port agent
|
32292c720d | Merge remote-tracking branch 'origin/main' into auto/port-p6-audio | ||
|
MechaCat02
|
7492b45095 |
agents: merge main at the start of every iteration
Both agents read the protocol, their mission and the shared tooling from their OWN checkout, and both work on topic branches -- so without an explicit sync they follow whichever version of the rules existed when the branch started. Found concretely: tools/audio-capture and two protocol revisions were on main while the decoder worked for hours from a branch that had neither. The port had merged on its own initiative and did have them, which is exactly the kind of divergence nobody notices until the two disagree about what the rules say. |
||
|
Sylpheed port agent
|
4262223b94 | Merge remote-tracking branch 'origin/main' into auto/port-p6-audio | ||
|
MechaCat02
|
7e643c242c |
audio: actually install the capture path I kept deferring
The audio work was three parts and I shipped two. The transcode-fidelity method and the pinned 5.1 downmix landed; the null sink -- the only one that answers "what does the GAME play" -- I deferred to "the next natural rebuild window" and then rebuilt both images four times without doing it. pulseaudio-utils is now in both, with tools/audio-capture wrapping it: a null sink is a real device as far as an application is concerned, so Canary and Godot open it normally and parec records what they emit. This unblocks the decoder's Q8. The cue-to-event bindings are currently a name match against the authors' own identifiers -- a plausible guess, not a measurement -- and capturing what the game plays on a menu move converts them. `audio-capture run` reports the peak level and warns when the capture is silent, because silence is the failure that looks like success: a WAV of exactly the right duration, full of zeroes, because the application opened a different sink. A duration check alone passes it, which is how a confident wrong number gets made. |
||
|
Sylpheed port agent
|
76979c799c |
port: P5 end to end -- and the port's title never says PRESS (A)
The P5 gate walk starts on a screen. This runs the whole objective instead, and
it is the only thing that would have found what it found:
xvfb-run -a godot --path port -- --boot --play \
--script=accept,down,down,down,down,accept,cancel,cancel --shots=/tmp/e2e
publisher wordmark -> developer logos -> ADV (151.9 s) -> title -> (A) -> main
menu -> navigate -> (A) -> EXTRAS -> (B) with focus restored to ptbtn05 -> (B)
-> title. 166.76 s, exit 0, nine frames. Shared as 1788003274-e68367e787d5.
THE PORT'S TITLE DOES NOT TELL THE PLAYER TO PRESS (A). The boot's last step is
`title` = GP_TITLE build 4, and build 4 has NO `PRESS (A) BUTTON` plate. P5 has
just made (A) the only way off that screen.
Not a guess about the art -- both states are captured off the running game and
differ by exactly that plate (live-title-build4-no-plate.png vs
live-title-press-a.png), and the plate is ALREADY EXPORTED as `press_start`,
build 2, sitting in export/screens/title/ unused by anything.
RECORDED, NOT FIXED, and the distinction is the point. This is P3's gate that
P5 exposed, and fixing it needs two things the port does not have:
* WHICH state an idle post-boot title shows -- build 4 alone, build 4 with the
plate over it, or build 4 THEN the plate after a delay -- is BEHAVIOURAL.
The game demonstrably has both states and nothing says which follows the
intro. The port has no oracle for a sequence; that is the Decoder's.
* showing it means DRAWING TWO BUILDS AT ONCE, which this port has never done
-- every mode loads exactly one screen. That is a change to ScreenView, not
a line in flow.json, and it is not being smuggled in under a navigation
milestone on the strength of "it looks more right".
Filed in BLOCKED.md. P5's gate is (A) into a submenu and (B) back; both work.
Two smaller things the same run found, both fixed:
* the boot step's `why` still said "nothing takes the title's place until P5
gives it somewhere to go". P5 has. Now says what is true: `--boot` STOPS on
the title (a boot that ends by fading to black looks like a crash) and
`--play` HANDS THE HELD TITLE OVER -- the stop is not a bug and the handover
is not another boot step.
* an empty focus printed as a line that trailed off, reading like a value had
gone missing rather than like there is none. The title is a screen with no
`buttons` that still takes (A), so it now prints
"(none -- this screen has no focusable item)".
Also confirmed: entering a submenu directly (`--menu=extras`) and pressing (B)
enters the parent at its AUTHORED initial focus, not a restored one. There is no
history to restore and MenuFlow.cancel only claims a restored focus when the
stack agrees about where it is going.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CtmUw5N5LJaMW1Njb8Ziey
|
||
|
Sylpheed port agent
|
1defbe0a32 |
port: P5 -- the menus navigate, and the focus ring is drawn wrong on purpose
P5's gate is "a human clicks through it". The artifact is a scripted walk that
proves the wiring rather than the intent -- up (wraps 01->05), five down, (A)
into EXTRAS, down, (B) back, landing on the main menu with focus RESTORED to
EXTRAS, ten PNGs one per settled step:
xvfb-run -a godot --path port -- --menu \
--script=up,down,down,down,down,down,accept,down,cancel --shots=/tmp/p5
--script posts InputEventAction through Input.parse_input_event so the presses
arrive at _unhandled_input exactly as a d-pad's would. Calling MenuFlow directly
would have been shorter and would have proved nothing: the wiring between a
press and the cursor is the part most likely to be broken, and a direct call is
exactly the part that skips it.
Derived vs authored, which P5 is the easiest place to blur:
* DERIVED -- the ORDER of the items, from each screen file's `buttons`, which
the exporter already fills from button-role elements sorted by resting Y.
* AUTHORED -- destinations, initial focus, what (B) does, and left/right being
a no-op. All measured off the running game (HANDOFF Q4/Q5) or chosen, none
on the disc, all in authored/flow.json with a why.
Four of five main-menu destinations are `goto: null` with a `blocked` note. That
is a MILESTONE BOUNDARY, not an unknown -- DIFFICULTY, the save list, the lesson
list and OPTIONS were all measured and live in archives this export does not
carry. `blocked` and `none` are kept apart so nobody later "discovers" the gap.
--headless CANNOT DRAW, and the port hung instead of saying so.
Measured, not assumed: under --headless Godot's dummy renderer never emits
RenderingServer.frame_post_draw, so every capture path awaited it forever --
--capture since P1, --film since P3, --shots as of now. With stdout block-
buffered the observable behaviour was SILENCE, FOREVER, which in a loop reads as
a job still working. Isolated by `--quit` (prints, exits 0) vs `--capture` (zero
bytes, killed at 40 s). Now those three flags refuse at STARTUP naming the
xvfb-run line that works, and --script no longer waits for a frame it is not
going to photograph -- so headless walks the menus in 4.5 s as a cheap
regression check needing no X server.
REFUTATION ATTEMPT, against the Decoder's
|
||
|
MechaCat02
|
5a9b75e152 |
agents: they never spoke, the decoder lost the disc, and both shared one state dir
Three defects, all mine, found by checking instead of assuming. **They never exchanged a word.** SendMessage=0, ListAgents=0 across both new sessions. PROTOCOL.md specified in detail what a message MAY and MAY NOT do and never said how to send one or that the other agent was addressable -- they knew that last time only because the human told them directly, and rebuilding with fresh volumes wiped it. Policy without mechanism is prose. Now documented with the two addresses, a worked example, and an instruction to introduce themselves on the first iteration rather than waiting to have a question. **The decoder lost the disc and the ISO.** They used to arrive inside the project mount and silently stopped when /work became a clone. Silently is the word: the disc-gated tests SELF-SKIP without SYLPHEED_DISC and report green, so a whole test suite would have passed while measuring nothing. Both are now mounted explicitly, the ISO at a stable path so run-canary does not depend on host directory names. **Both agents shared one Claude state directory.** They share the host's ~/.claude, and once both working directories became /work they resolved to the same projects/-work/ -- two supposedly independent agents writing to one place, which undoes the point of separate checkouts. Each now has its own volume, seeded once from the host with credentials only, so a token refresh writes locally and neither can corrupt the host's auth. Also widened the pacing rule. It banned ScheduleWakeup by name; the decoder then scheduled itself an hourly cron job -- not harmful, but the same instinct that ended a run yesterday, through a door I had left open. Now: no self-scheduling by any route. Mount audit after the changes: shared and intentional are the exchange volume and the read-only credential seed. Everything else -- repo, Claude state, cargo, target, canary, disc, ISO -- is per agent or one-sided. |
||
|
Sylpheed port agent
|
3e280d63de |
port: P5 groundwork -- the focus record, measured and checked against a capture
P5 is the lowest unfinished milestone. This does not implement navigation; it
settles how a focused button is drawn, because three claims sat under that and
none had been checked from this side.
Refutation attempts, all three failed -- recorded either way, per PROTOCOL:
* HANDOFF ask 3's '(7,7)' focus offset SURVIVES, and more strongly than
stated: over a 15x14 scan of the whole offset space it is a UNIQUE
ISOLATED cell at 100% coverage on all five buttons, with (6,6) and (7,6)
both below 90%. The centre and pivot alignments reproduce the 78-84%
band the RE agent called misleading.
* ORACLE-CAPTURES' 'a crop, not a scale' SURVIVES. Its own evidence -- a
+/-6 px cross-correlation -- cannot tell a crop from a 0.9375 scale, so
it was re-tested with a scale-sensitive one: button text bands land at
design y + 23 for all three unoccluded buttons, an exactly 1:1 vertical
mapping. (The prose understates 45 missing rows as 'the missing row'.)
* My own suspicion that the declared geometry disagreed with the capture
by 6 px was MY ARITHMETIC ERROR, written up rather than quietly dropped:
I took the top-left as pos - pivot. pos IS the top-left; the pivot is the
anchor scale grows about and cancels at 100%, exactly the 'can be got
wrong invisibly' that screen_view.gd:120 warns about.
What is actually true, and what P5 does with it:
* The exporter ALREADY emits the focus record's second element, the 42x46
ring ptbtneff01, for all five buttons. That gap is in the renderer, not
the exporter -- nothing to change in crates/sylpheed-export.
* Base minus focus is (7,7) directly from the declared positions, so P5
draws each focus element at its own pos and authors no constant.
* ptbtn04 is 1 px off the 80 px grid ON THE DISC (base rows 162 242 322
401 482; focus rows a clean 155 235 315 395 475). So its base->focus
delta is (7,6) while its art aligns at (7,7). Do NOT derive focus
placement from the base by a constant: it would be wrong on exactly one
button and right on the other four.
Verified against captures rather than our other renderer: diffing
live-main-menu against live-main-menu-options-focused isolates one cluster at
x 506..702, y 398..445, and ptbtn04's focus record under pos-as-top-left spans
x 500..706, y 395..451. Under pos - pivot it predicts x 433..604, y 367..422,
which matches nothing in the capture and no other button either.
Also records an instrument that FAILED ITS CONTROL and was discarded: a masked
NCC template matcher returned NCC 0.096-0.206 with three of five results pinned
to the search boundary when asked to re-find the base sprites at their known
positions. None of its output is used. Filed so this is not rebuilt.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Evuhbt8pxKJEUvwfniwYkU
|
||
|
Sylpheed port agent
|
d090c9c75c |
port: reconcile BLOCKED.md against the in-repo HANDOFF at 0fd8e69
The page cited '/reborn HEAD 9501879' and that address no longer resolves, for two reasons it now records: * the repositories were merged into one monorepo ( |
||
|
MechaCat02
|
c58196b795 |
containers: each agent clones the monorepo into its own volume
The last structural fix for the collision class that has bitten three times. Both containers now clone the repository into their OWN named volume instead of bind-mounting a human's working tree, so an agent's local git config cannot capture a human's commits, a credential helper cannot leak a container-only path onto the host, and a `git add -A` cannot sweep another party's in-flight files. Cloned once at startup and never auto-pulled: pulling under a running agent moves files out from under whatever it is mid-edit, which is the same bug again. Accepted knowingly: Claude Code keys per-project memory off the working directory, so moving off the host path starts that memory empty. The corpus in docs/ is the memory that matters and it travels with the clone. Other changes: * docker/agent -> docker/decoder; the launcher is sylph-decoder. Roles, not "the agent", now that there is more than one. * /reborn is gone -- one repository now, so the port reads HANDOFF from its own checkout rather than through a live read-only mount of someone else's tree. * Canary mounts separately at /canary; it stays a fork tracking upstream. * A shared `sylpheed-exchange` volume at /exchange, with tools/ on PATH so `share` is available in both. * The decoder's credential file gets the .host-copy treatment the port already had -- `credential.helper=store` rewrites by rename-over-target, which is EBUSY on a bind mount and reports a fatal that is not one. * Budget split deliberately: decoder 5 cpu / 6 GB, port 3 / 4, leaving room for the planned Referee. "Half the host" was right when there was one agent. Prompts move to docs/agents/ and are rewritten around the protocol: the oracle is the running game, dynamic RE stays with the decoder, each iteration must attempt to refute one claim of the other, and neither may verify its way out of its own role. |
||
|
MechaCat02
|
c27bdee021 |
agents: the team protocol, the share tool, and a player's-eye navigation doc
**navigation.md rewritten from the player's chair.** It was written from the inside out -- GamePart ids, pak names, sprite names -- which is how WE find things, not what the game shows anyone. Now it describes what is on screen, what you press and what happens, with internals as footnotes. Most rows are open on purpose: it exists to be filled in by playing, and the in-game tutorials are the resource for the flight half. **tools/share** gives transient files provenance without giving them history. Three kinds of thing were travelling down one channel with opposite needs: code and decoded knowledge want permanence, cited evidence wants permanence, and "look at this PNG" wants no history at all. The third kind bloats a repository forever; passing it by message is worse, because the receiver gets bytes with no idea which build produced them. `share put` records who, when, what, the sender's commit, and whether their tree was dirty -- because a capture taken from a modified tree cannot be reproduced from the sha, and the receiver deserves to know that before building an argument on it. **docs/agents/PROTOCOL.md** is the contract. The parts that matter: Dynamic RE stays with the Decoder -- most of what is open is behavioural and cannot be answered from the file. What the planned Referee adds is different: bias enters at what you CHOOSE to capture, so a corpus captured to a fixed protocol by someone with no hypothesis is worth more than one captured to settle an argument. A message may point, ask, prioritise and challenge. It may not change scope, redefine ground truth, or carry a finding instead of writing it down -- including a message claiming to relay the human, because a relayed instruction has no evidence attached and this project has watched a wrong belief travel further and faster than its correction. Adversarial duty is explicit: every iteration, try to refute one claim of another agent and record the attempt either way. Run your own instrument through a control first. Disagreements go to the human with both positions, not to whoever is more certain. And no agent may verify its way out of its own role: the Port has no oracle, the Decoder builds nothing, the Referee interprets nothing. |
||
|
MechaCat02
|
9fbb352ef0 |
monorepo: one repository for the decoders, the port and the corpus
Merges the Godot port into the reverse-engineering repository, preserving both
histories -- 1019 commits of corpus plus the port's 31, brought in by subtree
merge and then moved into place so git can follow each file across the rename.
The reason is not tidiness. The two-repo split forced the exporter to depend on
the decoders by pinned revision, and that created a whole class of failure that
now disappears: a sha reachable only from a topic branch, orphaned by a
squash-merge, breaking a fresh checkout silently at build time. It also forced a
live read-only mount of one agent's working tree into another's container, which
is why a contract file could move mid-iteration. With a path dependency, a
decoder change and the exporter change it requires land in the same commit or
not at all.
Canary stays separate: it is a fork tracking upstream.
New structure for the long term:
docs/game/ how the game is NAVIGATED -- menus, modals, prompts, alerts,
and in-game flight. Written so nobody rediscovers it. Mostly
open questions on purpose; the in-game tutorials are the
resource for the flight half.
docs/port/MODDING.md
modding as a constraint on the exporter TODAY, not a later
feature: one logical asset in one file (the disc splits nearly
everything, and resolving that is the exporter's job), names a
person recognises, PNG/OGG/OGV/JSON only, base-and-overrides so
re-exporting is always safe, provenance in every file.
data/base + data/mods
generated tree and drop-in overrides, both gitignored
exchange/ transient inter-agent files, deliberately outside history
docs/agents/ the team protocol
Both the README and the navigation doc lead with the correction that cost the
most: the oracle is the real game under Xenia Canary. Reborn's renderer is a
hypothesis under test, it has been wrong, and treating it as ground truth
propagated into three documents and both agents before a human caught it.
Scripted modding stays possible without being built: no screen name is hardcoded
in GDScript and there is no native code in port/, which is what Godot Mod Loader
needs to be able to substitute behaviour later.
|
||
|
Sylpheed RE agent
|
590fc5bbff |
agent: tag the decoder states the port pins, and stop leaking credential config
Two fixes to push-work and the policy that goes with them.
**Tags.** The port's exporter depends on sylpheed-formats BY REVISION, so a
commit of ours is part of its build -- and the commit it pinned lived on one
auto/* branch and nowhere else. Deleting that branch orphans it; squash-merging
it is worse, because squash creates NEW commits, so main appears to contain the
work while the pinned sha becomes unreachable and the port stops building for a
fresh checkout. Silently, at their build, long after the breakage.
push-work now pushes with --follow-tags, which publishes annotated tags
reachable from the pushed commits, and MISSION.md says to tag whatever the port
needs. formats-pin-2026-08-29 at
|
||
|
Sylpheed RE agent
|
1eb36c2b9d |
re(media): the disc ships movies in TWO audio profiles, and 28 of them are 5.1
Probed all 97 movies. 28 are wmapro 48 kHz 6-channel 5.1 -- ADV.wmv and every S*.wmv story cutscene; the other 69 are wmav2 48 kHz stereo, every RT*.wmv and hokyu_*.wmv. The split is cinematics vs in-mission radio chatter. Both movies the menu milestone needs, ADV.wmv (the boot/attract intro) and S00A.wmv (the new-game intro), are in the SURROUND group. Why it matters: one ffmpeg command over dat/movie/ produces two different kinds of result and records neither. The 69 stereo files pass through unchanged; the 28 surround files get downmixed 5.1 -> stereo by ffmpeg's DEFAULT matrix, folding centre-channel dialogue into L/R at a weighting nobody chose and which is not stable across ffmpeg versions. That is a content decision inherited by accident, so it should be stated explicitly and recorded beside the command. Credit where due: found by the human while checking a transcode, verified independently here and widened from one file to the whole disc. Two METHOD entries from the same episode, both about measurement rather than format: don't probe a file another process is still writing (a half-written transcode reported 33 s against a 137 s source, no error, nearly a filed bug), and a difference-signal RMS is meaningless before cross-correlation alignment (-34.2 dB against a -25.3 dB source looks like failure and is inconclusive). |
||
|
Sylpheed RE agent
|
76653ca41b |
re(ui): the focus ring SPINS, the game draws it, and the leaf owns the f record
Three things, all from parsing ptbtn0Nf.rat as a build. 1. THE RING SPINS. Its two keyframes differ in exactly one field: rotation_deg ramps 0 -> 360 with position, scale, alpha and tint all constant. A spin in place, the same shape as the GP_BUNK example already recorded. 2. THE ORACLE CONFIRMS THE GAME RENDERS IT. In the OPTIONS-focused capture the ring's bright head sits in a completely different angular position from the sprite's own -- caught mid-spin. This is a SECOND independent confirmation that rotation_deg is drawn, now on a different screen and a different element from the ptloop sweeps, and it raises rotation's priority: it is not a title-only concern that sits off-screen at rest, it is the main menu's focus marker. NO ANGLE IS QUOTED. A brightest-region centroid says ~250 deg, but the control refuses that precision -- rotating the sprite by a known 30/90/180/270 and re-measuring gives errors up to 19.8 deg. What survives the error bar is that a <=20 deg error cannot manufacture a ~250 deg displacement. 3. WHICH PLACEMENT WINS -- correcting this page's own earlier caveat, which said to use the leaf only for elements the parent does not declare. Right for a BASE record, wrong for an f record: the parent declares NO element for ptbtn0Nf.rat at all (zero of build 5's 16), so the f record's placement comes from its leaf for BOTH elements, label included. The label's (-7,-7) is load-bearing -- the f sprite is 13px larger per axis and -7 keeps them concentric (535+96/2 = 583 vs 542+83/2 = 583.5). Corroborated against the oracle: the focused-minus-unfocused region is x 505..703, and the leaf predicts a right edge near 707 where the parent reading predicts 714. Also exposes UiBuild::records (name -> (offset, size) of a nested .rat leaf). Nested records were parsed into a PRIVATE map, so a consumer holding a UiBuild could not locate a leaf's bytes at all -- which is exactly what blocked the port from reaching the ring. |
||
|
Sylpheed RE agent
|
6779d9c807 |
media: expose se_wave_riff -- the menu's SE cues, assembled where the format lives
The port is forbidden from reimplementing media assembly and Static.slb is exactly that case: no RIFF, no seek chunk, no XACT container, just a packed run of whole 2048-byte XMA1 packets, so a wave is defined only by (offset, packet count) and the header has to be synthesized. That step now happens once, in the crate that owns the format, instead of in each consumer. `slb::xma1_wave_riff` wraps raw packets; `media::se_wave_riff` looks the bank up and reads just the packets asked for. Both reuse the existing synth_xma1_fmt / build_riff, which are already byte-identical to what tools/re-capture/ slb_extract_wave.py writes -- so this is exposure, not a second implementation. It reads a TARGETED range rather than the whole bank, and that is load-bearing: Static.slb is the ONE entry of sound.pak's 9 519 whose declared extent runs past the end of the extracted segments -- by exactly 616 768 B -- so reading it whole fails outright on this extraction. Every cue we need is in the first few hundred KB. Recorded rather than worked around silently. Verified as an artifact, not a compile: all three cues decode through ffmpeg to mono 48 kHz PCM at 0.533 / 0.344 / 1.016 s, non-silent (rms 2085 / 2985 / 4327, peaks 29813 / 16973 / 32767). The refusal path is exercised in the same run -- an impossible packet count is rejected rather than returning a short stream, because a truncated XMA decodes to plausible-sounding garbage. Also adds docs/re/captures/ORACLE-CAPTURES.md: an index of the nine canary framebuffer captures already in this repo, and a plain statement that THEY are the reference and `screen render` is not. |
||
|
Sylpheed RE agent
|
0ee0bb8565 |
re(ui): the focus ring's position is decoded -- a .rat leaf parses as a build
The port needed ptbtneff01.t32's placement and was about to author it from an eyeballed PNG measurement. It does not have to: a `.rat` leaf needs no new reader. Its first 32 bytes have a bundle header's shape -- "RATC", 0x3c declaration-entry size at +4, element count at +20, design 1280x720 at +24/+28 -- so ui_layout::parse_build reads it unchanged. The control is the base record, whose position is known independently: the parent screen reports ptbtn01.rat resting at (542,162), and parsing the leaf alone returns ptbtn01.t32 at (542,162). It reproduces all five buttons. Positions are absolute design-space top-left. The ring rests at (500, 156/236/ 316/396/476) for buttons 1-5 -- a uniform (-42,-6) from each button's own rest, identical in the Japanese bundle. The bright label is a uniform (-7,-7). Two things recorded rather than smoothed over: a leaf's placement DUPLICATES the parent's rather than being relative to it, and the two copies are not always byte-equal (ptbtn04's parent says y=401, its leaf says 402) -- the parent is what compose honours, so the leaf is the source only for elements the parent does not declare, which is exactly the ring. And `screen render --focus` is blind to the ring for the same reason the port's exporter was: el.focused is name-based on top-level elements and neither walks into the leaf. |
||
|
Sylpheed RE agent
|
0fd8e6953e |
re(ui): answer four of the port's five asks -- splash, fade-out, focus, gamma
1 SPLASH ADDRESSING (was blocking P3). No content predicate exists: design size fails (every extra composable bundle sampled is 1280x720, like every screen) and element count fails (fragments run 2..15, the splash halves are 3 and 7). But GP_TITLE needs none -- `--all` adds exactly four bundles there and all four are real screens, with the --all index equal to the pak entry index 1:1. And there are TWO splash screens: 11/14 are the developer logos, 10/13 are the SQUARE ENIX publisher wordmark, which the port did not have and which the boot shows first. 2 FADE-OUT (was blocking P3). It is (a), and it is bigger than the fade quad. Every element ends on exactly ONE untimed keyframe, which rules out (b); that block is where the screen plays out -- quad to a=255, buttons/labels/glows to a=0, frames hold. (c) is refuted by a null test that discriminates: a black quad alone holds the button/background brightness ratio constant, and through the fade it falls 6.50 -> 1.94, 3.4x monotonic. 3 FOCUS (saves P5 rework). Over-vs-instead is unobservable -- the focused sprite covers the base at 100.0% of base-visible pixels on three pairs once aligned (true offset (7,7); the centre alignment reads a misleading 78-84%), and compositing both ways differs by RMSE 1.1 inside the button rect. The real defect is the focus record's SECOND element: ptbtn0Nf.rat declares ptbtneff01.t32 (a 42x46 glowing ring, focus only) plus the bright label, where the base declares one sprite. That ring is the marker the port draws nowhere. 5 GAMMA. The capture is not neutral: capture ~ 255*(render/255)^g, g ~ 1.34-1.49, and the chain says it is a ramp the GAME installed, not a capture artefact. So RMSE against captures has a floor. Reach stated: the flat patches are all dark (render ~0-60), so midtones and highlights are unconstrained. 4 ROTATION is a human's call and is recorded in MISSION, not acted on -- the port rotating while the reference renderer does not would make verify-screen report a large diff meaning "the port is right". The RE half is answered: rotation is about the declared pivot, measured against a GPU capture. The focus record's +20 element-count word is marked 🟡 not ✅ -- read on GP_TITLE's ten button records only; the disc-wide check is written and still running. |
||
|
Sylpheed RE agent
|
9501879b28 |
docs(method): time the disc mesh suite -- 22 minutes of silence is not a hang
Two runs were killed this session for looking stuck. Measured: 1 318 s serial, no output while it runs. Also records that `build-reborn test` forces --workspace and silently ignores a `-p`, so scoping needs the cargo passthrough (`build-reborn t -p <crate>`). |
||
|
Sylpheed RE agent
|
1a82ade187 |
re(ui): the 60 nameless RATC children are frames, not children -- .tan decoded
Closes the reach caveat the `opt ` name fix left behind: 60 of 18 002 RATC children carry no `opt ` block, and it was not established whether they lack one or sit past our 128-byte window. Neither. They are not children. `examples/ratc_optless_children.rs` re-runs `ratc::parse`'s own guards over the disc and reports which one fired: all 60 are "tag beyond the window", none is rejected by length, gap or charset, none is child #0, and all 60 live in six bundles of one archive. Within a bundle the distances back to the nearest tag are an exact arithmetic progression, step 60 600 -- ten different records finding the SAME tag, because there is only one. Reading a bundle directly: children 1..10 are equal-size T8aD blocks under a single `opt ` name, `pb_f15_eg_anm.tan`. `.tan` is a FRAME SEQUENCE. One block declares the resource; its payload is a run of T8aD frames. Disc-wide, over all 18 718 `opt ` names in all 33 paks: a RATC bundle names exactly six kinds of resource -- `.t32` 14 756, `.rat` 3 311, `.prm` 367, `.tbm` 224, `.sbo` 54, `.tan` 6. Six `.tan`, ten frames each = 60, the entire population with nothing left over. The negative is closed, not narrowed. Consequence recorded but deliberately not fixed: `ratc::parse` over-reports there, listing a `.tan`'s frames as anonymous children. Nothing in the menu milestone reads a `.tan` -- it occurs only in GP_READY_ROOM, which S1 ruled out -- so no screen the port draws changes. Also a METHOD entry for this container OOM-killing `slb_leading_segment_disc` under default test parallelism (SIGKILL, no assertion; 8/8 pass with --test-threads=1). |
||
|
Sylpheed RE agent
|
0ed33bcd38 |
re(ui): a RATC child's name is stated, not inferred -- and it was hiding every menu background
`ratc::parse` named each child by scanning backwards for the last printable run of bytes before its magic. The format states the name explicitly instead, in an `opt ` block: `"opt " | BE32 len | name | NUL | 3 bytes | magic` -- the same block `ui_layout::opt_link` already read for a button's focus link. The scan agrees with it 17 918 times out of 17 942 and is wrong 24 times, every one the same failure: the 3 trailing payload bytes are themselves printable and beat the real name. For `pteff05.t32` those bytes are `38 41 58` = `8AX`, so the full-resolution background of all five menu screens registered under a name no element declares, resolved to no sprite, and `compose` dropped it through an early `continue` that -- unlike the two arms above it -- records nothing. The screen lost its background and `screen render` still reported "all resolved". `8AX` was never a name. Docs that treated it as one are corrected here. Disc-wide, and the control is the 17 918 the scan already got right: the `opt ` reading reproduces every one of them. Effect on the five screens is the signature of the same art at twice the resolution -- mean brightness unmoved, high-frequency detail x1.15..x1.30 -- which is what the separately-measured `ui-8ax-fullres-background` result said the game draws. Also closes a long-standing dangling reference: `pmbase.t32`, recorded as "on the disc nowhere", is the `GP_STAGE_CLEAR` child the scan called `8AX`. RATC sibling references now resolve 10 148 of 10 148. Verified: 114/114 sylpheed-formats unit tests (including two new ones pinning the `8AX` case byte for byte and the no-block fallback), and every disc-gated integration suite in sylpheed-formats/sylpheed-cli. |
||
|
Sylpheed RE agent
|
04a3ae1389 |
docs: withdraw yesterday's "paint order is a sequence" -- wrong source
Last iteration I claimed the splash's measured_paint_order [0,2,4,6,1,3,5]
records, between its glow and logo halves, the temporal order they were
seen in rather than depth -- because the halves never share a frame.
The no-overlap measurement is right (glows f94-115, logos f116-211). The
inference is wrong, on two independent grounds:
* Wrong source. That vector is not a read of the draw capture. It is a
read of the live screen object's CHILD ARRAY -- ui-screen-runtime.md
records it literally as "paint order (child slots)". A child list has
a definite order whether or not its children are ever drawn together,
so co-occurrence does not bear on it. The capture was the CHECK.
* The order is in the file anyway. paint_order_audit on GP_TITLE entry
11: derived == measured, 0 inverted pairs, 0 same-layer-key ties. The
glows and logos carry distinct T8aD keys (0xa100 < 0xa110), so the
file orders the halves statically, no capture involved.
I asked the question that started this iteration -- do the title and menu
orders have the same problem -- and the answer is that none of the three
does, for the same reason.
What survives is narrower and now recorded with numbers: how much of each
order its capture actually cross-checks. The title capture is stable (8
draws / 12 quads / 5 textures, identical in all five captured frames
across two logs) and confirms 7 of 24 positions; the menu capture is not
(texture 0x11C30000 present in frame 0, gone by frame 3); the splash
capture cannot cross-check its middle at all.
A counting trap worth the tool: count QUADS, not draws. The menu's draw 9
is indices=24 -- six quads batched from one texture. Counting draws reads
9 where 16 are on screen, and an earlier pass of this analysis briefly
"found" three quads for six declarations that way and concluded elements
were missing. They were batched.
METHOD: check what a "measured" value was measured FROM before reasoning
about its limits. The co-occurrence rule is real, and it is specific to
orders read from draw captures.
|
||
|
Sylpheed RE agent
|
a7257c96d6 |
docs: the splash .prm measured -- and its paint order is a sequence, not depth
ui-prm-primitives recorded that where a .prm paints on a screen without a measured order is unsolved. For the developer splash it is now measured. Every frame opens with two full-screen draws before any sprite. The second is untextured in all 212 frames with a constant vertex colour of FF000000 -- opaque black -- matching palogo_eff0.prm's declaration exactly: kind 0x10, pivot (640,360) -> 1280x720, one keyframe, a = 255. So the splash backdrop is an opaque black full-screen quad from the bundle itself, painted behind every sprite, which is why a splash render needs --black rather than the default backdrop. Not a general rule, and said so: the measured main-menu order puts pteff02.prm at position 4 and pteff00.prm LAST, the latter being the screen-transition fade. And a correction to an existing row. measured_paint_order returns [0, 2, 4, 6, 1, 3, 5] for the splash, described as "the .prm, then all three glows, then the three logos". But the glows and the logos never appear in the same frame -- 0 overlapping frames in 235 -- and two elements that never co-occur have no observable relative depth. Between those halves the vector records the order they were SEEN IN, not a front-to-back relationship. That does not make the render wrong, and element 0 is a real depth observation since the .prm co-occurs with everything. But the type of the claim matters: reading the vector as depth invites compositing all seven elements at once, which is exactly what does not reproduce the screen. METHOD: two things that never co-occur have no observable relative order; when recording an order, note which pairs actually appeared together. |
||
|
Sylpheed RE agent
|
11aa4ec7cf |
re(ui): deliver the measured splash sequence the port has to author
The activation decision is code, and MISSION already says the port authors the sequence -- so the useful move is to hand over the sequence measured rather than chase the code. From the 235-frame draw capture, at 1 frame = 1/30 s (2 units/frame, 1 unit = 1/60 s, both settled in Q1): publisher: SQUARE ENIX logo f1-90 90 frames 3.00 s+ at 0.00 (gap, nothing drawn) f91-93 3 frames 0.10 s at 3.00 developer: both glows f94-115 22 frames 0.73 s at 3.10 developer: both logos f116-211 96 frames 3.20 s at 3.83 Three limits, stated with the numbers rather than after them. The capture opens with palogo_sqex already at a=255, so the publisher phase began before the window and 3.00 s is a FLOOR -- every "starts at" is relative to the capture, not to boot. palogo_anima and palogo_anima_eff get 0 draws in all 214 frames, so a third pair's phase is not in this measurement. And it is one capture, one run: the glow->logo switch being a single frame boundary with no overlap is a strong shape, but each duration is one sample. What is solid is the part that matters: the 0.73 s and 3.20 s phases are each within 2% of their element's declared span, so the durations are the bundle's own and only the ordering is authored. That is the difference between a port transcribing timing and inventing it. |