Files
Sylpheed/tools/ppc-manual/memory/stb.md
MechaCat02 10dc260f0c chore(tools): adopt the PPC manual and a canary launcher that works anywhere
CONSOLIDATION.md Phase 6. Both lived untracked in the project root -- on one
disk, backed up by nothing.

  tools/ppc-manual/   393 files, 3.7 MB. 455 instructions, 350 family pages,
                      598 mnemonics resolvable through index.json, plus the
                      generator that produced them.
  tools/run-canary.sh the oracle launcher.

🔴 THE LAUNCHER WAS BROKEN IN TWO WAYS AND IS REWRITTEN, not copied:

  * it pointed at `xenia-rs/sylpheed.iso`, a SYMLINK. Wine cannot resolve one
    and says "path invalid", which reads as a corrupt image rather than a path
    problem -- it has cost a session before. It now points at the real file and
    warns if handed a symlink.
  * it hardcoded one machine's absolute paths, and named `xenia-rs`, which this
    consolidation retires. Now derived from the script's own location, with
    SYLPH_CANARY_BIN / SYLPH_ISO overrides and a check that each exists.

The standing constraints are in its header where someone will read them: one
emulator at a time, Canary runs MUTED, and never judge a crash or a hang from
a Bash-launched run -- a SIGKILL that looked like the binary was the editor's
process supervisor.

⚠️ The manual's GENERATOR reads the xenia-rs source tree, which is going away.
Its decoder now lives here as crates/sylpheed-ppc, so the generator must be
repointed before it is run again. Recorded in the README rather than left for
someone to discover; the manual's content is checked in and regenerates from
nothing implicitly.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-13 21:18:00 +02:00

11 KiB
Raw Blame History

stb — Store Byte

Category: Memory · Form: D · Opcode: 0x98000000

Assembler Mnemonics

Mnemonic XML entry Flags Description
stb stb — Store Byte
stbu stbu — Store Byte with Update
stbux stbux — Store Byte with Update Indexed
stbx stbx — Store Byte Indexed

Syntax

stb [RS], [d]([RA0])
stbu [RS], [d]([RA])
stbux [RS], [RA], [RB]
stbx [RS], [RA0], [RB]

Encoding

stb — form D

  • Opcode word: 0x98000000
  • Primary opcode (bits 0–5): 38
  • Extended opcode: —
  • Synchronising: no
Bits Field Meaning
0–5 OPCD primary opcode
6–10 RT destination GPR (or RS when storing)
11–15 RA source GPR (0 ⇒ literal 0 for RA0 forms)
16–31 D/SI/UI 16-bit signed or unsigned immediate

stbu — form D

  • Opcode word: 0x9c000000
  • Primary opcode (bits 0–5): 39
  • Extended opcode: —
  • Synchronising: no
Bits Field Meaning
0–5 OPCD primary opcode
6–10 RT destination GPR (or RS when storing)
11–15 RA source GPR (0 ⇒ literal 0 for RA0 forms)
16–31 D/SI/UI 16-bit signed or unsigned immediate

stbux — form X

  • Opcode word: 0x7c0001ee
  • Primary opcode (bits 0–5): 31
  • Extended opcode: 247
  • Synchronising: no
Bits Field Meaning
0–5 OPCD primary opcode
6–10 RT/FRT/VRT destination
11–15 RA/FRA/VRA source A
16–20 RB/FRB/VRB source B
21–30 XO extended opcode (10 bits)
31 Rc record-form flag

stbx — form X

  • Opcode word: 0x7c0001ae
  • Primary opcode (bits 0–5): 31
  • Extended opcode: 215
  • Synchronising: no
Bits Field Meaning
0–5 OPCD primary opcode
6–10 RT/FRT/VRT destination
11–15 RA/FRA/VRA source A
16–20 RB/FRB/VRB source B
21–30 XO extended opcode (10 bits)
31 Rc record-form flag

Operands

Field Role Description
RS stb: read; stbu: read; stbux: read; stbx: read Source GPR (alias for RD in some stores).
RA0 stb: read; stbx: read Source GPR; when the encoded register number is 0 the operand is the literal 64-bit zero, not r0.
d stb: read; stbu: read 16-bit signed displacement (d) added to the base address register.
RA stbu: read; stbu: write; stbux: read; stbux: write Source GPR (r0–r31).
RB stbux: read; stbx: read Source GPR.

Register Effects

stb

  • Reads (always): RS, RA0, d
  • Reads (conditional): none
  • Writes (always): none
  • Writes (conditional): none

stbu

  • Reads (always): RS, RA, d
  • Reads (conditional): none
  • Writes (always): RA
  • Writes (conditional): none

stbux

  • Reads (always): RS, RA, RB
  • Reads (conditional): none
  • Writes (always): RA
  • Writes (conditional): none

stbx

  • Reads (always): RS, RA0, RB
  • Reads (conditional): none
  • Writes (always): none
  • Writes (conditional): none

Status-Register Effects

No condition-register or status-register effects.

Operation (pseudocode)

EA <- (RA|0) + EXTS(d)
MEM(EA, 1) <- (RS)[56:63]

C Translation Example

/* C translation: the xenia-rs interpreter arm below in           */
/* Implementation References is the authoritative semantic        */
/* snapshot. Translate it line-by-line:                            */
/*   - ctx.gpr[N]  -> r[N]       (or f[]/v[] for FPRs/VRs)        */
/*   - mem.read_u*/write_u* -> mem_read_u*_be / mem_write_u*_be   */
/*   - ctx.update_cr_signed(fld, v) -> update_cr_signed(fld, v)   */
/*   - ctx.xer_ca / xer_ov / xer_so -> xer.CA / xer.OV / xer.SO   */
/* The Register Effects and Status-Register Effects tables above  */
/* enumerate every side effect a faithful translation must emit.  */

Implementation References

stb

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stb => {
            let ea = if instr.ra() == 0 { 0u64 } else { ctx.gpr[instr.ra()] };
            let ea = ea.wrapping_add(instr.d() as i64 as u64) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.pc += 4;
        }

stbu

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stbu => {
            let ea = ctx.gpr[instr.ra()].wrapping_add(instr.d() as i64 as u64) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.gpr[instr.ra()] = ea as u64;
            ctx.pc += 4;
        }

stbux

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stbux => {
            let ea = ctx.gpr[instr.ra()].wrapping_add(ctx.gpr[instr.rb()]) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.gpr[instr.ra()] = ea as u64;
            ctx.pc += 4;
        }

stbx

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stbx => {
            let ea = if instr.ra() == 0 { 0u64 } else { ctx.gpr[instr.ra()] };
            let ea = ea.wrapping_add(ctx.gpr[instr.rb()]) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.pc += 4;
        }

Special Cases & Edge Conditions

  • Single-byte write. Writes the low 8 bits of RS ((RS)[56:63] in IBM bit-numbering, equivalently RS & 0xFF) at EA. The xenia snapshot does mem.write_u8(ea, ctx.gpr[instr.rs()] as u8), which casts the GPR's low byte directly.
  • No endian concerns. A single byte has no endianness — the byte at EA is the byte you wrote.
  • RA0 (non-update forms). RA = 0 in stb and stbx selects literal zero as base — useful for absolute writes. Update forms stbu / stbux invoke RA = 0 as an invalid form (no RA = RT collision since the source is RS, not RT).
  • Update-form post-write. stbu / stbux write the computed EA back to RA after the store. The order is store-then-update; if RA = RS the store is unaffected (the store reads RS first), but the new RA value reflects EA, not the original RS.
  • No alignment requirement. Byte stores are intrinsically aligned. Xenon never raises alignment exceptions for byte writes.
  • Common in string and packed-bool code. Compilers emit stb for char * writes, packed boolean array updates, and small enum stores.
  • Cache effects. A stb to a cold cache line triggers a cache-line read-allocate (load the whole line, modify one byte, mark dirty). When writing many bytes sequentially, prefer one stw or stvx, or pre-clear the line with dcbz128.
  • sth, stw, std — wider stores (half / word / doubleword).
  • lbz — corresponding load (no lba exists).
  • stmw, stswi, stswx — multi-word / string stores for bulk transfer.
  • stwbrx, sthbrx — byte-reversed wider stores (no byte-equivalent needed).

IBM Reference