e1749c83e1
Some checks failed
The decoder died mid-task and it took four separate findings to explain, each of which read as something else: 1. OOM-KILLED, REPORTED AS A CLEAN EXIT. `OOMKilled: true` with **ExitCode 0**. So `--restart on-failure` would treat a memory kill as a successful finish and leave the agent down -- the policy has to be `unless-stopped`. 2. THE JOB CAP WAS SET AND THEN REMOVED THREE LINES LATER. build-reborn has always exported CARGO_BUILD_JOBS, but a raw `cargo test --release -p sylpheed-formats` never reaches the wrapper. Adding `-e CARGO_BUILD_JOBS` to the launcher did not help either: the entrypoint recomputes and exports over it unconditionally. An explicit value now wins, and says so in the log. 3. THE MEMORY CONSTANT WAS WRONG. `mem_gib * 2 / 3` assumes ~1.5 GB per job; release rustc on this workspace needs ~2 GB, and 4 jobs in 6 GB is what died. Divisor is now 2. 4. `--continue` CANNOT RESUME AN ABRUPT DEATH, which is the only kind we get. It resolves through ~/.claude.json's per-project `history`/`lastSessionId`, and MEASURED mid-session both are None -- they are written at a graceful shutdown. A killed container never writes them, so `--continue` answered "No conversation found to continue" with 33 MB of transcripts in the volume beside it. Persisting .claude.json did not help, because the fields were never populated in the first place; that attempt is removed rather than left in looking useful. The TRANSCRIPTS are durable and named by session id, so the entrypoint reads the id off the newest one for its cwd and passes `--resume <id>`. Verified on both agents: each reattached to its exact prior session and appended to the same file rather than opening a new one. The /loop prompt is still passed alongside `--resume`, so the loop is RE-ARMED rather than merely restored -- a resumed conversation with no wake-up scheduled answers once and stops, which looks like resuming and is not. Restarting into the same death is guarded at the other end: a start less than 120 s after the previous one begins FRESH instead of continuing back into whatever killed it. That fired correctly during this work. On resume the agent is told it was restarted, that its in-progress work is uncommitted in the tree, that any build or capture it had running did not finish and its absence is not a result, and which wrapper to prefer over a raw release build.
379 lines
19 KiB
Bash
Executable File
379 lines
19 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# Host-side launcher for the Sylpheed RE agent container.
|
|
#
|
|
# Caps the container at HALF the machine's CPUs and memory, computed at run time
|
|
# so it stays half on whatever box it lands on.
|
|
#
|
|
# ./sylph-agent build build (or rebuild) the image
|
|
# ./sylph-agent shell interactive shell in the container
|
|
# ./sylph-agent agent [prompt] Claude Code, --dangerously-skip-permissions
|
|
# ./sylph-agent loose [task] turn it loose: detached, /loop, self-paced
|
|
# ./sylph-agent logs [-f] what the loose agent is doing
|
|
# ./sylph-agent remote print the Remote Control link (chat from anywhere)
|
|
# ./sylph-agent attach attach to the loose agent's session
|
|
# ./sylph-agent run <cmd...> one-shot command
|
|
# ./sylph-agent stop stop it
|
|
#
|
|
# Environment:
|
|
# SYLPH_PROJECT host project root (default: three levels up from this file)
|
|
# SYLPH_CLAUDE_HOME host dir mounted as the agent's ~/.claude
|
|
# (default: $HOME/.claude — shares auth AND memory with you)
|
|
# SYLPH_VULKAN=sw force software Vulkan (lavapipe) even if /dev/dri exists
|
|
# SYLPH_REMOTE=0 do NOT enable Remote Control (default: enabled for `loose`)
|
|
# SYLPH_REMOTE_NAME Remote Control session name (default: sylpheed-agent)
|
|
# SYLPH_GIT_CREDENTIALS file with `https://<user>:<token>@host` for push-work
|
|
# (default: $HOME/.sylph-git-credentials)
|
|
# SYLPH_LOOP_INTERVAL fixed loop cadence, e.g. 30m (default: 45m)
|
|
# SYLPH_CPUS / SYLPH_MEM_GB override the computed half
|
|
set -euo pipefail
|
|
|
|
HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
|
IMAGE="${SYLPH_IMAGE:-sylpheed-agent:latest}"
|
|
NAME="${SYLPH_NAME:-sylpheed-agent}"
|
|
PROJECT="${SYLPH_PROJECT:-$(cd "$HERE/../../.." && pwd)}"
|
|
|
|
# ── Half the box ─────────────────────────────────────────────────────────────
|
|
# LC_ALL=C is required, not tidiness: under a locale with a comma decimal
|
|
# separator (de_DE and friends) awk prints "6,0" and docker rejects it as
|
|
# --cpus with "failed to parse as a rational number".
|
|
HOST_CPUS=$(nproc)
|
|
HOST_MEM_KB=$(awk '/MemTotal/{print $2}' /proc/meminfo)
|
|
# Fixed, not "half the host": half was right when this was the only agent. There
|
|
# are now two, and a Referee is planned, so the budget is split deliberately
|
|
# instead of each container claiming half of a box it shares. The decoder gets
|
|
# the larger share because it builds and drives the emulator.
|
|
CPUS="${SYLPH_CPUS:-5}"
|
|
MEM_GB="${SYLPH_MEM_GB:-6}"
|
|
[ "$MEM_GB" -lt 2 ] && MEM_GB=2
|
|
# /dev/shm holds the emulator's guest memory (gmem.py reads it there). Docker's
|
|
# 64 MB default is far too small for a 512 MB console address space, and the
|
|
# failure is an obscure mmap error rather than an out-of-space message. tmpfs
|
|
# pages count against the memory cap, so take a third of it and no more.
|
|
SHM_GB=$(( MEM_GB / 3 )); [ "$SHM_GB" -lt 1 ] && SHM_GB=1
|
|
|
|
CLAUDE_JSON="${SYLPH_CLAUDE_JSON:-$HOME/.claude.json}"
|
|
if [ ! -f "$CLAUDE_JSON" ]; then
|
|
echo "==> WARNING: $CLAUDE_JSON does not exist." >&2
|
|
echo " Docker would create a DIRECTORY at that path inside the container," >&2
|
|
echo " and Claude Code would fail confusingly. Run \`claude\` once on the" >&2
|
|
echo " host first, or set SYLPH_CLAUDE_JSON." >&2
|
|
fi
|
|
|
|
usage() { sed -n '2,20p' "${BASH_SOURCE[0]}" | sed 's/^# \{0,1\}//'; exit "${1:-0}"; }
|
|
|
|
docker_args() {
|
|
local -n _out=$1
|
|
_out=(
|
|
--name "$NAME"
|
|
--hostname sylph-agent
|
|
# ── the cap ──
|
|
--cpus "$CPUS"
|
|
--memory "${MEM_GB}g"
|
|
--memory-swap "${MEM_GB}g" # no swap escape hatch: a swapping build
|
|
# thrashes the whole host, which is the
|
|
# failure this cap exists to prevent
|
|
--pids-limit 4096
|
|
# /dev/shm as an EXEC-capable tmpfs, not --shm-size. Docker's default mounts
|
|
# it `noexec`, and xenia maps its JIT code cache out of a shm file at a fixed
|
|
# address — so with noexec it dies at startup with "Unable to allocate code
|
|
# cache generated code storage / Cannot initalize processor", which reads
|
|
# like an address-space clash rather than a mount flag.
|
|
--tmpfs "/dev/shm:rw,exec,nosuid,nodev,size=${SHM_GB}g"
|
|
# Dynamic RE needs to attach to a live process: without SYS_PTRACE, gdb and
|
|
# strace are installed but inert ("Could not attach to process"), and the
|
|
# container's whole reason for existing is watching the emulator run.
|
|
# Docker's default seccomp profile also blocks calls the JIT and the guest
|
|
# memory mapper rely on.
|
|
--cap-add SYS_PTRACE
|
|
--security-opt seccomp=unconfined
|
|
--security-opt apparmor=unconfined
|
|
# ── the repository ──
|
|
# The agent's OWN clone, in its own volume -- not a bind mount of a human's
|
|
# working tree. That arrangement bit this project three times: an agent's
|
|
# `git config --local` captured a human's commits, a credential helper
|
|
# leaked a container-only path onto the host, and a `git add -A` swept an
|
|
# agent's in-flight files into someone else's commit. Separate checkouts
|
|
# make all three impossible rather than merely discouraged.
|
|
#
|
|
# The cost, accepted knowingly: Claude Code keys its per-project memory off
|
|
# the working directory, so moving from the host path to /work starts that
|
|
# memory empty. The corpus in docs/ is the memory that matters and it
|
|
# travels with the clone.
|
|
-v "sylpheed-decoder-repo:/work"
|
|
# Xenia Canary stays a separate repository -- it is a fork tracking upstream
|
|
# and carries our instrumentation. Read-write: building probes into it is
|
|
# real work, not a side effect.
|
|
-v "${SYLPH_CANARY:-$HOME/RE Project Sylpheed/xenia-canary}:/canary"
|
|
# The disc and the ISO. These used to arrive inside the project mount and
|
|
# silently stopped when /work became a clone -- silently because the
|
|
# disc-gated tests SELF-SKIP without SYLPHEED_DISC and report green, which
|
|
# is the most expensive kind of missing mount.
|
|
-v "${SYLPH_DISC:-$PROJECT/sylph_extract}:/disc:ro"
|
|
-e "SYLPHEED_DISC=/disc"
|
|
# ── the static-analysis corpus ──
|
|
# The xenia-rs era's disassembly database and the flat VA image. Neither is
|
|
# reproducible from anything in this repository yet -- the four scripts that
|
|
# READ sylpheed.db have no producer here -- so they are mounted read-only
|
|
# from the host as reference material.
|
|
#
|
|
# The `.pe` matters most: it is the decompressed image as a flat VA dump
|
|
# (file offset = VA - 0x82000000), which removes the need to boot the
|
|
# emulator and scrape /dev/shm to get at it. An earlier belief that this
|
|
# file was STALE was tested and refuted -- it is current.
|
|
-v "${SYLPH_XENIA_RS:-$PROJECT/xenia-rs}:/xenia-rs:ro"
|
|
-v "${SYLPH_PE:-$PROJECT/Project Sylpheed - Arc of Deception (USA, Europe) (En,Ja).pe}:/image/sylpheed.pe:ro"
|
|
-e "SYLPHEED_DB=/xenia-rs/sylpheed.db"
|
|
-e "SYLPHEED_PE=/image/sylpheed.pe"
|
|
-e "SYLPHEED_IMAGE_BASE=0x82000000"
|
|
# The shared exchange: transient files with provenance, outside git history.
|
|
-v "sylpheed-exchange:/exchange"
|
|
-e "PROJECT_DIR=/work"
|
|
-e "SYLPH_EXCHANGE=/exchange"
|
|
-e "SYLPH_AGENT=decoder"
|
|
# 🔴 THE JOB CAP LIVES IN THE ENVIRONMENT, NOT IN THE WRAPPER.
|
|
#
|
|
# `build-reborn` has always exported CARGO_BUILD_JOBS, and on 2026-09-01
|
|
# that was not enough: the agent ran a RAW `cargo test --release -p
|
|
# sylpheed-formats`, which never touches the wrapper, got one rustc per
|
|
# granted CPU, and the container was OOM-killed at its 6 GB cap mid-task.
|
|
# Docker reported ExitCode 0 with OOMKilled true, so it read as a clean
|
|
# exit and cost a diagnosis.
|
|
#
|
|
# A guardrail reachable only through a wrapper protects the calls that use
|
|
# the wrapper. This one is inherited by every process in the container, so
|
|
# bypassing it takes an explicit override rather than forgetting.
|
|
-e "CARGO_BUILD_JOBS=${SYLPH_JOBS:-2}"
|
|
-e "SYLPH_REPO_URL=https://git.mc02.dev/fabi/Sylpheed.git"
|
|
-e "XENIA_SRC=/canary"
|
|
# ── claude ──
|
|
# The state dir is shared read-write: credentials live in
|
|
# .claude/.credentials.json, so token refresh needs to write, and this is
|
|
# also what carries the project memory across.
|
|
-v "sylpheed-decoder-claude:/sylph-home/re/.claude"
|
|
-v "${SYLPH_CLAUDE_HOME:-$HOME/.claude}:/sylph-home/re/.claude.seed:ro"
|
|
# ~/.claude.json sits BESIDE that directory and holds `hasCompletedOnboarding`.
|
|
# Mounted READ-ONLY at a staging path: the entrypoint copies it to
|
|
# ~/.claude.json and stamps onboarding as done. Sharing the file directly
|
|
# would (a) re-run the first-run theme wizard whenever the container's
|
|
# Claude Code version differs from the host's — a silent hang an unattended
|
|
# agent never gets past — and (b) let the container rewrite your host config.
|
|
-v "${SYLPH_CLAUDE_JSON:-$HOME/.claude.json}:/sylph-home/re/.claude.host.json:ro"
|
|
# persistent build caches, so a container restart is not a rebuild
|
|
-v sylph-agent-cargo:/sylph-home/re/.cargo
|
|
-v sylph-agent-target:/sylph-home/re/target-container
|
|
-v sylph-agent-canary-build:/sylph-home/re/canary-build
|
|
)
|
|
# ── Vulkan SDK ──
|
|
# xenia's shader step calls `spirv-opt --canonicalize-ids`, which Ubuntu's
|
|
# packaged SPIRV-Tools (v2025.1) does not have — the build then dies ~500
|
|
# objects in. The LunarG SDK has it. Mounting the host's copy at the same path
|
|
# is cheaper than baking a 200 MB SDK into the image AND guarantees the
|
|
# container produces byte-identical shaders to the host build.
|
|
SDK="${VULKAN_SDK:-}"
|
|
if [ -z "$SDK" ]; then
|
|
SDK=$(ls -d "$HOME"/vulkan-sdk/*/x86_64 2>/dev/null | sort -V | tail -1 || true)
|
|
fi
|
|
if [ -n "$SDK" ] && [ -x "$SDK/bin/spirv-opt" ]; then
|
|
_out+=(-v "$SDK:$SDK:ro" -e "VULKAN_SDK=$SDK")
|
|
else
|
|
echo "==> NOTE: no Vulkan SDK found on the host. Building Canary's shaders" >&2
|
|
echo " needs spirv-opt with --canonicalize-ids (LunarG SDK); Ubuntu's" >&2
|
|
echo " packaged SPIRV-Tools is too old. Running is unaffected." >&2
|
|
fi
|
|
|
|
# ── git push ──
|
|
# Read-only, and only ever used by `push-work`, which refuses anything but an
|
|
# auto/* branch and never force-pushes. Without this the agent's work only
|
|
# exists inside the container and dies with it.
|
|
GITCRED="${SYLPH_GIT_CREDENTIALS:-$HOME/.sylph-git-credentials}"
|
|
if [ -f "$GITCRED" ]; then
|
|
_out+=(-v "$GITCRED:/sylph-home/re/.git-credentials.host:ro")
|
|
else
|
|
echo "==> NOTE: no git credentials at $GITCRED — the agent cannot push," >&2
|
|
echo " so its work will be lost if the container is destroyed. Create it" >&2
|
|
echo " with a single line and chmod 600:" >&2
|
|
echo " https://<user>:<token>@git.mc02.dev" >&2
|
|
echo " or point SYLPH_GIT_CREDENTIALS elsewhere." >&2
|
|
fi
|
|
|
|
[ -n "${ANTHROPIC_API_KEY:-}" ] && _out+=(-e "ANTHROPIC_API_KEY=$ANTHROPIC_API_KEY")
|
|
[ -n "${SYLPH_VULKAN:-}" ] && _out+=(-e "SYLPH_VULKAN=$SYLPH_VULKAN")
|
|
[ -n "${SYLPH_REMOTE:-}" ] && _out+=(-e "SYLPH_REMOTE=$SYLPH_REMOTE")
|
|
[ -n "${SYLPH_REMOTE_NAME:-}" ] && _out+=(-e "SYLPH_REMOTE_NAME=$SYLPH_REMOTE_NAME")
|
|
# The ISO Canary boots. Default resolves the retail image beside the project;
|
|
# mounted at a stable in-container path so run-canary does not depend on the
|
|
# host's directory names.
|
|
_iso="${SYLPH_ISO:-$PROJECT/Project Sylpheed - Arc of Deception (USA, Europe) (En,Ja).iso}"
|
|
if [ -f "$_iso" ]; then
|
|
_out+=(-v "$_iso:/iso/game.iso:ro" -e "SYLPH_ISO=/iso/game.iso")
|
|
else
|
|
echo "==> NOTE: no ISO at $_iso -- Canary has nothing to boot." >&2
|
|
fi
|
|
|
|
# ── GPU ──
|
|
# Three distinct cases, and conflating them is how you end up believing you
|
|
# have hardware Vulkan while actually running llvmpipe:
|
|
#
|
|
# NVIDIA needs the NVIDIA Container Toolkit (`--gpus all`). Passing
|
|
# /dev/dri alone does NOT work — Mesa cannot drive an NVIDIA card,
|
|
# and the proprietary userspace lives outside the image.
|
|
# Mesa (AMD/Intel) works with a plain /dev/dri passthrough plus the
|
|
# host's render/video GIDs.
|
|
# neither software Vulkan (lavapipe): correct, and slow.
|
|
if [ "${SYLPH_VULKAN:-auto}" = "sw" ]; then
|
|
_out+=(-e SYLPH_VULKAN=sw)
|
|
elif command -v nvidia-smi >/dev/null 2>&1 && nvidia-smi -L >/dev/null 2>&1; then
|
|
if docker info --format '{{json .Runtimes}}' 2>/dev/null | grep -q nvidia; then
|
|
_out+=(--gpus all)
|
|
else
|
|
echo "==> NOTE: NVIDIA GPU found but the NVIDIA Container Toolkit is not" >&2
|
|
echo " installed, so hardware Vulkan is unavailable and the container" >&2
|
|
echo " will use lavapipe (software — correct, slow). To enable it:" >&2
|
|
echo " sudo apt install nvidia-container-toolkit \\" >&2
|
|
echo " && sudo nvidia-ctk runtime configure --runtime=docker \\" >&2
|
|
echo " && sudo systemctl restart docker" >&2
|
|
_out+=(-e SYLPH_VULKAN=sw)
|
|
fi
|
|
elif [ -e /dev/dri/renderD128 ]; then
|
|
_out+=(--device /dev/dri)
|
|
for g in render video; do
|
|
gid=$(getent group "$g" | cut -d: -f3 || true)
|
|
[ -n "$gid" ] && _out+=(--group-add "$gid")
|
|
done
|
|
else
|
|
_out+=(-e SYLPH_VULKAN=sw)
|
|
fi
|
|
}
|
|
|
|
case "${1:-}" in
|
|
build)
|
|
shift
|
|
echo "==> building $IMAGE (uid $(id -u), gid $(id -g))"
|
|
exec docker build -t "$IMAGE" \
|
|
--build-arg "AGENT_UID=$(id -u)" --build-arg "AGENT_GID=$(id -g)" \
|
|
"$@" "$HERE"
|
|
;;
|
|
|
|
loose)
|
|
shift
|
|
# "On the loose": detached, self-paced, working the RE backlog until stopped.
|
|
#
|
|
# -d WITHOUT --rm so the transcript survives the container exiting; that is
|
|
# the only record of what an unattended run did. -t because /loop keeps the
|
|
# session alive and schedules its own wake-ups — a `-p`/print-mode run would
|
|
# answer once and exit, killing the loop on its first iteration.
|
|
TASK="${1:-}"
|
|
if [ -z "$TASK" ]; then
|
|
if [ -f "$HERE/../../docs/agents/decoder-loop.md" ]; then
|
|
TASK="$(cat "$HERE/../../docs/agents/decoder-loop.md")"
|
|
else
|
|
TASK="Work the RE backlog in Syplheed-Reborn/docs/re/BACKLOG.md."
|
|
fi
|
|
fi
|
|
# A FIXED interval by default, not self-pacing. Self-pacing requires the
|
|
# agent to call ScheduleWakeup itself at the end of every turn, and the one
|
|
# thing an agent deep in an experiment reliably forgets is the bookkeeping
|
|
# after it. With an interval the harness owns the cadence and a forgotten
|
|
# wakeup cannot end the run. Set SYLPH_LOOP_INTERVAL= (empty) to self-pace.
|
|
INTERVAL="${SYLPH_LOOP_INTERVAL-45m}"
|
|
declare -a ARGS; docker_args ARGS
|
|
ARGS+=(-e SYLPH_AUTONOMOUS=1 -w /work)
|
|
echo "==> loose | cpus=$CPUS mem=${MEM_GB}g shm=${SHM_GB}g"
|
|
echo "==> repo: own clone in volume sylpheed-decoder-repo -> /work"
|
|
echo "==> pacing: ${INTERVAL:-self-paced}"
|
|
docker rm -f "$NAME" >/dev/null 2>&1 || true
|
|
# 🔴 `unless-stopped`, NOT `on-failure` -- and the reason is a trap worth
|
|
# keeping. When this container was OOM-killed on 2026-09-01, Docker reported
|
|
# `OOMKilled: true` with **ExitCode 0**. `on-failure` keys off the exit code,
|
|
# so it would have treated a memory kill as a clean finish and left the agent
|
|
# down. `unless-stopped` restarts regardless, and still honours an explicit
|
|
# `./sylph-agent stop`.
|
|
#
|
|
# Restarting into the same death is handled at the other end: the entrypoint
|
|
# refuses to `--continue` if the last start was under two minutes ago.
|
|
docker run -d -i -t --restart unless-stopped "${ARGS[@]}" "$IMAGE" \
|
|
"/loop ${INTERVAL:+$INTERVAL }$TASK" >/dev/null
|
|
echo
|
|
echo " running detached as '$NAME'."
|
|
echo " ./sylph-agent remote link to chat with it from anywhere"
|
|
echo " ./sylph-agent logs -f follow it"
|
|
echo " ./sylph-agent attach chat with it locally (Ctrl-P Ctrl-Q to leave it running)"
|
|
echo " ./sylph-agent stop stop it"
|
|
echo
|
|
# Report what is actually true. This line used to claim unconditionally that
|
|
# the agent could not push, which was written before credentials were
|
|
# supported and then went stale — telling the operator their work was at risk
|
|
# when it was not, which is the exact failure the credential mount fixes.
|
|
if [ -f "${SYLPH_GIT_CREDENTIALS:-$HOME/.sylph-git-credentials}" ]; then
|
|
echo " It commits to auto/* branches and publishes them with push-work,"
|
|
echo " which refuses any other branch and never force-pushes. Review with:"
|
|
echo " git -C '$PROJECT/Syplheed-Reborn' fetch origin && git log --oneline origin/auto/..."
|
|
else
|
|
echo " It commits to auto/* branches and CANNOT PUSH — no git credentials"
|
|
echo " are mounted, so its work dies with the container. Review it with:"
|
|
echo " git -C '$PROJECT/Syplheed-Reborn' log --oneline auto/..."
|
|
fi
|
|
;;
|
|
|
|
logs) shift; exec docker logs "$@" "$NAME" ;;
|
|
|
|
remote)
|
|
# Fish the Remote Control link out of the session's own output. Claude Code
|
|
# prints it once, when the session registers with your account — which takes
|
|
# a minute or two after launch, so this waits rather than answering "not
|
|
# found" to a question that is really "not yet".
|
|
printf 'waiting for the session to register' >&2
|
|
for i in $(seq 1 90); do
|
|
url=$(docker logs "$NAME" 2>&1 \
|
|
| sed 's/\x1b\[[0-9;]*[a-zA-Z]//g; s/\r//g' \
|
|
| grep -oE 'https://claude\.ai/code/[A-Za-z0-9_-]+' | tail -1)
|
|
if [ -n "${url:-}" ]; then
|
|
printf '\n' >&2
|
|
echo "$url"
|
|
exit 0
|
|
fi
|
|
docker ps -q -f "name=$NAME" | grep -q . || {
|
|
printf '\n' >&2
|
|
echo "container is not running — start it with: ./sylph-agent loose" >&2
|
|
exit 1
|
|
}
|
|
printf '.' >&2
|
|
sleep 4
|
|
done
|
|
printf '\n' >&2
|
|
echo "no Remote Control URL after 6 minutes." >&2
|
|
echo " Launched with SYLPH_REMOTE=0? Or check: ./sylph-agent logs | tail" >&2
|
|
exit 1
|
|
;;
|
|
|
|
shell|agent|run)
|
|
mode=$1; shift
|
|
declare -a ARGS; docker_args ARGS
|
|
echo "==> $mode | cpus=$CPUS mem=${MEM_GB}g shm=${SHM_GB}g (host: ${HOST_CPUS} cpus, $((HOST_MEM_KB/1048576))g)"
|
|
echo "==> project: $PROJECT -> /work"
|
|
docker rm -f "$NAME" >/dev/null 2>&1 || true
|
|
# Allocate a TTY only when stdin actually is one: `docker run -it` fails
|
|
# outright ("cannot attach stdin to a TTY-enabled container") under a
|
|
# pipeline or a CI runner, which is exactly where `run` gets used.
|
|
TTY=(-i); [ -t 0 ] && TTY=(-it)
|
|
case "$mode" in
|
|
shell) exec docker run --rm "${TTY[@]}" "${ARGS[@]}" "$IMAGE" bash ;;
|
|
agent)
|
|
# The flag the user asked for. Refused under root, which is why the
|
|
# image runs as an unprivileged `agent` user.
|
|
ARGS+=(-e SYLPH_AUTONOMOUS=1)
|
|
exec docker run --rm "${TTY[@]}" "${ARGS[@]}" "$IMAGE" "$@"
|
|
;;
|
|
run) exec docker run --rm "${TTY[@]}" "${ARGS[@]}" "$IMAGE" "$@" ;;
|
|
esac
|
|
;;
|
|
|
|
stop) exec docker rm -f "$NAME" ;;
|
|
doctor)
|
|
declare -a ARGS; docker_args ARGS
|
|
exec docker run --rm "${ARGS[@]}" "$IMAGE" sylph-doctor
|
|
;;
|
|
""|-h|--help) usage 0 ;;
|
|
*) echo "unknown command: $1" >&2; usage 2 ;;
|
|
esac
|