Sylpheed/docs/re/boot-order-and-splash-dwell.md

The boot's first ten seconds: publisher, then developer — and the movie has a logo card too

Status: ✅ CONFIRMED. The order is measured in three independent cold boots and confirmed by eye, not only by a correlation. The dwells are decoded — they are on the disc, and the running game reproduces them to within the emulator's own frame pacing.

Raised by the port agent against data/boot-timeline-2026-08-29.tsv, whose label column runs splash_dev before splash_pub — the opposite of what authored/flow.json carries. If that ordering were real it would be a boot-order bug in the port. It is not real, and this page says why.

The order: publisher first

Brightened ×6 — these frames have a surface mean of ≈5/255. Top-left and top-right are the two splashes; the bottom row is what comes next and is NOT a splash.

run	SQUARE ENIX (publisher)	GAME ARTS/SETA/studio anima (developer)
1	3.046 → 7.343 s	7.683 → 11.191 s
2	1.180 → 5.784 s	6.051 → 9.554 s
3	1.192 → 5.562 s	5.929 → 9.295 s

Three cold boots, t = 0 at process launch, a ~0.2–0.3 s black hold between them. Publisher first, every time, and the top row of the contact sheet is what the two segments actually show. docs/game/navigation.md §1 and ui-title-build-map.md stand.

Why the committed TSV says otherwise — the probe attached late

data/boot-timeline-2026-08-29.tsv opens at t = 0.692 with twelve byte-identical rows: mean 5.642, splash_dev +0.8707, splash_pub +0.0294, to four decimals. Twelve identical samples over 1.27 s are one observation of a held screen, not twelve.

Those exact numbers appear in my run 1 at 8.42 – 10.94 s — same mean, same two correlations, same four decimals. So that capture's t = 0 is roughly 7.7 s into the guest's boot: the publisher splash had already been and gone before the stream opened, and the developer splash was simply the first thing the probe ever saw.

The label column is right about what each frame is. It is wrong about what came before the file starts. Nothing in the TSV is retracted; its reach is.

The trap that makes this worse: ADV.wmv opens with a SQUARE ENIX card

After the developer splash there is a black hold and then a screen that scores 0.59 – 0.75 against live-splash-publisher.png — above the classifier's threshold, so it is labelled splash_pub a second time. In all three runs:

run	second "splash_pub"
1	17.793 → 20.301 s
2	16.930 → 20.664 s
3	14.669 → 17.308 s

The bottom row of the contact sheet is that screen. It is a blurred, bloomed SQUARE ENIX wordmark, lower in the frame — the intro movie's own opening title card, i.e. ADV.wmv (movie-binding.md) already playing. The real splash's wordmark is sharp and centred; the movie's is soft and sits below centre.

⚠️ So splash_pub is not a safe label once the movie has started. A boot classifier keyed on live-splash-publisher.png will fire twice per boot. The discriminators that do work: the real splash holds perfectly still (identical frame statistics to four decimals for seconds at a time) and scores 0.93–0.94; the movie card drifts continuously and never exceeds 0.76.

The dwells are on the disc — do not author them

Both splash bundles declare their whole life. Read with the corrected keyframe record layout (ui-keyframe-record-layout.md) and Q1's 1 unit = 1/60 s:

	declared	visible span	measured (run 1 / 2 / 3)
publisher, palogo_sqex.t32	α 0@15 → 255@30 → 255@235 → 232@239 → 32@251 → 0@255	15 → 255 = 240 u = 4.000 s	4.297 / 4.604 / 4.370 s
developer, palogo_gamearts.t32 (seta, anima identical)	α 0@15 → 255@30 → 255@190 → 232@194 → 32@206 → 0@210	15 → 210 = 195 u = 3.250 s	3.508 / 3.503 / 3.366 s

Measured ÷ declared, over all six spans: 1.074, 1.151, 1.093, 1.079, 1.078, 1.036 — mean 1.085. A 30 Hz timeline stretched by 8.5 % is the game presenting at 27.6 fps, which is the rate this corpus has measured independently three times (27.6 on the boot splash, 28.3 and 28.8 on the idle title — ui-keyframe-time-unit.md).

✅ Classified decoded. The port reads 240 units for the publisher and 195 units for the developer and authors nothing.

⚠️ Reach of the ±: a correlation crossing a threshold during a fade is not a sharp edge, so an individual span is good to roughly ±0.2 s. The developer's first two runs agree to 5 ms, which is the instrument at its best; run 2's publisher span (4.604 s) is the outlier and its onset at 1.180 s is early enough to be a stream still filling. The order does not depend on any of this.

Method

tools/re-capture/boot_timeline_probe.py, whose --control was run first and passed 11/11 on the content classifier and 4/4 on the plate detector, including live-splash-publisher.png → splash_pub and live-splash-developer.png → splash_dev with each rejecting the other at 0.035. So a 0.87 reading against the developer reference is a real match and not an artefact of two dark images: the two references are both dark and they do not correlate with each other.

Both splash references are themselves committed captures whose identity is independent of any correlation — live-splash-publisher.png was matched to GP_TITLE entry 10, whose elements are literally named palogo_sqex, and live-splash-developer.png to entry 11, palogo_gamearts / palogo_seta / palogo_anima.

Boots were cold: /dev/shm/xenia_* cleared, no pad input at any point.

What this does not say

• Nothing here is about the movie's length or the attract loop; the runs were cut at 26–45 s. That half is in data/boot-timeline-2026-08-29.tsv, whose intervals are unaffected by the attach offset even though its absolute t is.
• The 0.2–0.3 s black hold between the two splashes was not separately timed against the declared palogo_eff0.prm backdrop; it is consistent with the 0.14–0.30 s black hold already measured between screens (title-plate-delay-measured.md) but that is a consistency note, not a measurement of this particular gap.