Files
Sylpheed/tools/ppc-manual/memory/stb.md
MechaCat02 6bdbf89ebc
All checks were successful
CI / Native — linux (pull_request) Successful in 37m56s
CI / WASM — Web (pull_request) Successful in 28m5s
CI / Formatting (pull_request) Successful in 59s
chore(tools): adopt the PPC manual and a canary launcher that works anywhere
CONSOLIDATION.md Phase 6. Both lived untracked in the project root -- on one
disk, backed up by nothing.

  tools/ppc-manual/   393 files, 3.7 MB. 455 instructions, 350 family pages,
                      598 mnemonics resolvable through index.json, plus the
                      generator that produced them.
  tools/run-canary.sh the oracle launcher.

🔴 THE LAUNCHER WAS BROKEN IN TWO WAYS AND IS REWRITTEN, not copied:

  * it pointed at `xenia-rs/sylpheed.iso`, a SYMLINK. Wine cannot resolve one
    and says "path invalid", which reads as a corrupt image rather than a path
    problem -- it has cost a session before. It now points at the real file and
    warns if handed a symlink.
  * it hardcoded one machine's absolute paths, and named `xenia-rs`, which this
    consolidation retires. Now derived from the script's own location, with
    SYLPH_CANARY_BIN / SYLPH_ISO overrides and a check that each exists.

The standing constraints are in its header where someone will read them: one
emulator at a time, Canary runs MUTED, and never judge a crash or a hang from
a Bash-launched run -- a SIGKILL that looked like the binary was the editor's
process supervisor.

⚠️ The manual's GENERATOR reads the xenia-rs source tree, which is going away.
Its decoder now lives here as crates/sylpheed-ppc, so the generator must be
repointed before it is run again. Recorded in the README rather than left for
someone to discover; the manual's content is checked in and regenerates from
nothing implicitly.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-13 21:18:00 +02:00

11 KiB
Raw Blame History

stb — Store Byte

Category: Memory · Form: D · Opcode: 0x98000000

Assembler Mnemonics

Mnemonic XML entry Flags Description
stb stb Store Byte
stbu stbu Store Byte with Update
stbux stbux Store Byte with Update Indexed
stbx stbx Store Byte Indexed

Syntax

stb [RS], [d]([RA0])
stbu [RS], [d]([RA])
stbux [RS], [RA], [RB]
stbx [RS], [RA0], [RB]

Encoding

stb — form D

  • Opcode word: 0x98000000
  • Primary opcode (bits 05): 38
  • Extended opcode:
  • Synchronising: no
Bits Field Meaning
05 OPCD primary opcode
610 RT destination GPR (or RS when storing)
1115 RA source GPR (0 ⇒ literal 0 for RA0 forms)
1631 D/SI/UI 16-bit signed or unsigned immediate

stbu — form D

  • Opcode word: 0x9c000000
  • Primary opcode (bits 05): 39
  • Extended opcode:
  • Synchronising: no
Bits Field Meaning
05 OPCD primary opcode
610 RT destination GPR (or RS when storing)
1115 RA source GPR (0 ⇒ literal 0 for RA0 forms)
1631 D/SI/UI 16-bit signed or unsigned immediate

stbux — form X

  • Opcode word: 0x7c0001ee
  • Primary opcode (bits 05): 31
  • Extended opcode: 247
  • Synchronising: no
Bits Field Meaning
05 OPCD primary opcode
610 RT/FRT/VRT destination
1115 RA/FRA/VRA source A
1620 RB/FRB/VRB source B
2130 XO extended opcode (10 bits)
31 Rc record-form flag

stbx — form X

  • Opcode word: 0x7c0001ae
  • Primary opcode (bits 05): 31
  • Extended opcode: 215
  • Synchronising: no
Bits Field Meaning
05 OPCD primary opcode
610 RT/FRT/VRT destination
1115 RA/FRA/VRA source A
1620 RB/FRB/VRB source B
2130 XO extended opcode (10 bits)
31 Rc record-form flag

Operands

Field Role Description
RS stb: read; stbu: read; stbux: read; stbx: read Source GPR (alias for RD in some stores).
RA0 stb: read; stbx: read Source GPR; when the encoded register number is 0 the operand is the literal 64-bit zero, not r0.
d stb: read; stbu: read 16-bit signed displacement (d) added to the base address register.
RA stbu: read; stbu: write; stbux: read; stbux: write Source GPR (r0r31).
RB stbux: read; stbx: read Source GPR.

Register Effects

stb

  • Reads (always): RS, RA0, d
  • Reads (conditional): none
  • Writes (always): none
  • Writes (conditional): none

stbu

  • Reads (always): RS, RA, d
  • Reads (conditional): none
  • Writes (always): RA
  • Writes (conditional): none

stbux

  • Reads (always): RS, RA, RB
  • Reads (conditional): none
  • Writes (always): RA
  • Writes (conditional): none

stbx

  • Reads (always): RS, RA0, RB
  • Reads (conditional): none
  • Writes (always): none
  • Writes (conditional): none

Status-Register Effects

No condition-register or status-register effects.

Operation (pseudocode)

EA <- (RA|0) + EXTS(d)
MEM(EA, 1) <- (RS)[56:63]

C Translation Example

/* C translation: the xenia-rs interpreter arm below in           */
/* Implementation References is the authoritative semantic        */
/* snapshot. Translate it line-by-line:                            */
/*   - ctx.gpr[N]  -> r[N]       (or f[]/v[] for FPRs/VRs)        */
/*   - mem.read_u*/write_u* -> mem_read_u*_be / mem_write_u*_be   */
/*   - ctx.update_cr_signed(fld, v) -> update_cr_signed(fld, v)   */
/*   - ctx.xer_ca / xer_ov / xer_so -> xer.CA / xer.OV / xer.SO   */
/* The Register Effects and Status-Register Effects tables above  */
/* enumerate every side effect a faithful translation must emit.  */

Implementation References

stb

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stb => {
            let ea = if instr.ra() == 0 { 0u64 } else { ctx.gpr[instr.ra()] };
            let ea = ea.wrapping_add(instr.d() as i64 as u64) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.pc += 4;
        }

stbu

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stbu => {
            let ea = ctx.gpr[instr.ra()].wrapping_add(instr.d() as i64 as u64) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.gpr[instr.ra()] = ea as u64;
            ctx.pc += 4;
        }

stbux

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stbux => {
            let ea = ctx.gpr[instr.ra()].wrapping_add(ctx.gpr[instr.rb()]) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.gpr[instr.ra()] = ea as u64;
            ctx.pc += 4;
        }

stbx

xenia-rs interpreter body (frozen snapshot)
        PpcOpcode::stbx => {
            let ea = if instr.ra() == 0 { 0u64 } else { ctx.gpr[instr.ra()] };
            let ea = ea.wrapping_add(ctx.gpr[instr.rb()]) as u32;
            if let Some(t) = ctx.reservation_table.as_ref().filter(|t| t.is_enabled()) {
                if t.has_active_reservers() { t.invalidate_for_write(ea); }
            }
            mem.write_u8(ea, ctx.gpr[instr.rs()] as u8);
            ctx.pc += 4;
        }

Special Cases & Edge Conditions

  • Single-byte write. Writes the low 8 bits of RS ((RS)[56:63] in IBM bit-numbering, equivalently RS & 0xFF) at EA. The xenia snapshot does mem.write_u8(ea, ctx.gpr[instr.rs()] as u8), which casts the GPR's low byte directly.
  • No endian concerns. A single byte has no endianness — the byte at EA is the byte you wrote.
  • RA0 (non-update forms). RA = 0 in stb and stbx selects literal zero as base — useful for absolute writes. Update forms stbu / stbux invoke RA = 0 as an invalid form (no RA = RT collision since the source is RS, not RT).
  • Update-form post-write. stbu / stbux write the computed EA back to RA after the store. The order is store-then-update; if RA = RS the store is unaffected (the store reads RS first), but the new RA value reflects EA, not the original RS.
  • No alignment requirement. Byte stores are intrinsically aligned. Xenon never raises alignment exceptions for byte writes.
  • Common in string and packed-bool code. Compilers emit stb for char * writes, packed boolean array updates, and small enum stores.
  • Cache effects. A stb to a cold cache line triggers a cache-line read-allocate (load the whole line, modify one byte, mark dirty). When writing many bytes sequentially, prefer one stw or stvx, or pre-clear the line with dcbz128.
  • sth, stw, std — wider stores (half / word / doubleword).
  • lbz — corresponding load (no lba exists).
  • stmw, stswi, stswx — multi-word / string stores for bulk transfer.
  • stwbrx, sthbrx — byte-reversed wider stores (no byte-equivalent needed).

IBM Reference