d110cf38c7
The port is forbidden from reimplementing media assembly and Static.slb is exactly that case: no RIFF, no seek chunk, no XACT container, just a packed run of whole 2048-byte XMA1 packets, so a wave is defined only by (offset, packet count) and the header has to be synthesized. That step now happens once, in the crate that owns the format, instead of in each consumer. `slb::xma1_wave_riff` wraps raw packets; `media::se_wave_riff` looks the bank up and reads just the packets asked for. Both reuse the existing synth_xma1_fmt / build_riff, which are already byte-identical to what tools/re-capture/ slb_extract_wave.py writes -- so this is exposure, not a second implementation. It reads a TARGETED range rather than the whole bank, and that is load-bearing: Static.slb is the ONE entry of sound.pak's 9 519 whose declared extent runs past the end of the extracted segments -- by exactly 616 768 B -- so reading it whole fails outright on this extraction. Every cue we need is in the first few hundred KB. Recorded rather than worked around silently. Verified as an artifact, not a compile: all three cues decode through ffmpeg to mono 48 kHz PCM at 0.533 / 0.344 / 1.016 s, non-silent (rms 2085 / 2985 / 4327, peaks 29813 / 16973 / 32767). The refusal path is exercised in the same run -- an impossible packet count is rejected rather than returning a short stream, because a truncated XMA decodes to plausible-sounding garbage. Also adds docs/re/captures/ORACLE-CAPTURES.md: an index of the nine canary framebuffer captures already in this repo, and a plain statement that THEY are the reference and `screen render` is not.