No more beeps, no more persistent warnings, no more insults, just a single silent disclaimer that also helps the user get started using games from their console.
Updated the archived format detection to add tar/gz, and updated the box to state that xenia does not support running archived games.
Stub XamVoiceSubmitPacket
Stubs for __CAP_Start_Profiling/End_Profiling/Enter_Function/Exit_Function
add a note about io_status_block in NtDeviceIoControlFile, change the param's type
move the X_IOCTL_ constants from NtDeviceIoControlFile's body into xbox.h
add X_STATUS_INVALID_IMAGE_FORMAT to xbox.h
Implement XexLoadImageHeaders
Much more correct version of IoCreateDevice, properly initializes/allocates device extension data
Stub version of IoDeleteDevice
Open the quickstart guide in the browser the first time a user opens the emulator
Add some persistent flags that are stored in the registry on windows, not in the config. These are just used to indicate whether one-time tasks have run, like showing the quickstart guide. On non-windows platforms a default value is returned that skips any of these tasks so they don't run every single time.
If the user opens a .iso file, show a warning telling them that we do not condone or support piracy. If the user closes the messagebox within two seconds set a sticky flag that will show them the warning every time instead. Otherwise the warning is never shown again. The Beep function is used to spook them a bit, to hopefully make them less likely to skip the message
If a user opens an archive file, which we do not support, explain to them that they're dumb.
Removed messages intended to "catch" pirates. If they're out there, we don't want to know about them. A huge chunk of the discourse on our discord is now about piracy. Hopefully these changes will deter them from coming to us for now, but some of these messages may backfire
- Display xex filenames in title selection.
- Fixed fullscreen controller hotkeys executing from a non-UI thread.
- Fixed recent_titles_entry_amount not disabling if set to <= 0.
- Use RunTitle instead of LaunchPath which does more error checking.
The "close window" keyboard hotkey (Guide-B) now toggles between loglevel -1 and the loglevel set in your config.
Added LoggerBatch class, which accumulates strings into the threads scratch buffer. This is only intended to be used for very high frequency debug logging. if it exhausts the thread buffer, it just silently stops.
Cleaned nearly 8 years of dust off of the pm4 packet disassembler code, now supports all packets that the command processor supports.
Added extremely verbose logging for gpu register writes. This is not compiled in outside of debug builds, requires LogLevel::Debug and log_guest_driven_gpu_register_written_values = true.
Added full logging of all PM4 packets in the cp. This is not compiled in outside of debug builds, requires LogLevel::Debug and disassemble_pm4.
Piggybacked an implementation of guest callstack backtraces using the stackpoints from enable_host_guest_stack_synchronization. If enable_host_guest_stack_synchronization = false, no backtraces can be obtained.
Added log_ringbuffer_kickoff_initiator_bts. when a thread updates the cp's read pointer, it dumps the backtrace of that thread
Changed the names of the gpu registers CALLBACK_ADDRESS and CALLBACK_CONTEXT to the correct names.
Added a note about CP_PROG_COUNTER
Added CP_RB_WPTR to the gpu register table
Added notes about CP_RB_CNTL and CP_RB_RPTR_ADDR. Both aren't necessary for HLE
Changed name of UNKNOWN_0E00 gpu register to TC_CNTL_STATUS. Games only seem to write 1 to it (L2 invalidate)
* Added controller hotkeys setting
Added option to disable controller hotkeys
Minor Changes
* Fixed locked input system
The input system lock should be released even if a controller is not connected.
Implemented Controller Hotkeys
Added controller hotkeys
Added guide button support for XInput and winkey
The hotkey configurations can be found in HID -> Display controller hotkeys
If the Xbox Gamebar overlay is enabled then use the Back button instead of the Guide button.
- Fixed hotkey thread destruction
- Fixed XINPUT_STATE by padding 4 bytes
- Added hotkey vibration for user feedback
- Replaced MessageBoxA with ImGuiDialog::ShowMessageBox
Co-authored-by: Margen67 <Margen67@users.noreply.github.com>
While a title is running any attempt to open another title will result in a crash this commit prevents these crashes via File->Open and File->Open Recent->Title
Opening a recent title with an invalid path caused a crash.
Proper handling of nans for VMX max/min on x64 (minps/maxps has special behavior depending on the operand order that vmx does not have for vminfp/vmaxfp)
Add extremely unintrusive guest code profiler utilizing KUSER_SHARED systemtime. This profiler is disabled on platforms other than windows, and on windows is disabled by default by a cvar
Repurpose GUEST_SCRATCH64 stack offset to instead be for storing guest function profile times, define GUEST_SCRATCH as 0 instead, since thats already meant to be a scratch area
Fix xenia silently closing on config errors/other fatal errors by setting has_console_attached_'s default to false
Add alternative code path for guest clock that uses kusershared systemtime instead of QueryPerformanceCounter. This is way faster and I have tested it and found it to be working, but i have disabled it because i do not know how well it works on wine or on processors other than mine
Significantly reduce log spam by setting XELOGAPU and XELOGGPU to be LogLevel::Debug
Changed some LOGI to LOGD in places to reduce log spam
Mark VdSwap as kHighFrequency, it was spamming up logs
Make logging calls less intrusive for the caller by forcing the test of log level inline and moving the format/AppendLogLine stuff to an outlined cold function
Add swcache namespace for software cache operations like prefetches, streaming stores and streaming loads.
Add XE_MSVC_REORDER_BARRIER for preventing msvc from propagating a value too close to its store or from its load
Add xe_unlikely_mutex for locks we know have very little contention
add XE_HOST_CACHE_LINE_SIZE and XE_RESTRICT to platform.h
Microoptimization: Changed most uses of size_t to ring_size_t in RingBuffer, this reduces the size of the inlined ringbuffer operations slightly by eliminating rex prefixes, depending on register allocation
Add BeginPrefetchedRead to ringbuffer, which prefetches the second range if there is one according to the provided PrefetchTag
added inline_loadclock cvar, which will directly use the value of the guest clock from clock.cc in jitted guest code. off by default
change uses of GUEST_SCRATCH64 to GUEST_SCRATCH
Add fast vectorized xenos_half_to_float/xenos_float_to_half (currently resides in x64_seq_vector, move to gpu code maybe at some point)
Add fast x64 codegen for PackFloat16_4/UnpackFloat16_4. Same code can be used for Float16_2 in future commit. This should speed up some games that use these functions heavily
Remove cvar for toggling old float16 behavior
Add VRSAVE register, support mfspr/mtspr vrsave
Add cvar for toggling off codegen for trap instructions and set it to true by default.
Add specialized methods to CommandProcessor: WriteRegistersFromMem, WriteRegisterRangeFromRing, and WriteOneRegisterFromRing. These reduce the overall cost of WriteRegister
Use a fixed size vmem vector for upload ranges, realloc/memsetting on resize in the inner loop of requestranges was showing up on the profiler (the search in requestranges itself needs work)
Rename fixed_vmem_vector to better fit xenia's naming convention
Only log unknown register writes in WriteRegister if DEBUG :/. We're stuck on MSVC with c++17 so we have no way of influencing the branch ordering for that function without profile guided optimization
Remove binding stride assert in shader_translator.cc, triangle told me its leftover ogl stuff
Mark xe::FatalError as noreturn
If a controller is not connected, delay by 1.1 seconds before checking if it has been reconnected. Asking Xinput about a controller slot that is unused is extremely slow, and XinputGetState/SetState were taking up
an enormous amount of time in profiles. this may have caused a bit of input lag
Protect accesses to input_system with a lock
Add proper handling for user_index>= 4 in XamInputGetState/SetState, properly return zeroed state in GetState
Add missing argument to NtQueryVirtualMemory_entry
Fixed RtlCompareMemoryUlong_entry, it actually does not care if the source is misaligned, and for length it aligns down
Fixed RtlUpperChar and RtlLowerChar, added a table that has their correct return values precomputed
[GPU] Add FXAA post-processing
[UI] Add FidelityFX FSR and CAS post-processing
[UI] Add blue noise dithering from 10bpc to 8bpc
[GPU] Apply the DC PWL gamma ramp closer to the spec, supporting fully white color
[UI] Allow the GPU CP thread to present on the host directly, bypassing the UI thread OS paint event
[UI] Allow variable refresh rate (or tearing)
[UI] Present the newest frame (restart) on DXGI
[UI] Replace GraphicsContext with a far more advanced Presenter with more coherent surface connection and UI overlay state management
[UI] Connect presentation to windows via the Surface class, not native window handles
[Vulkan] Switch to simpler Vulkan setup with no instance/device separation due to interdependencies and to pass fewer objects around
[Vulkan] Lower the minimum required Vulkan version to 1.0
[UI/GPU] Various cleanup, mainly ComPtr usage
[UI] Support per-monitor DPI awareness v2 on Windows
[UI] DPI-scale Dear ImGui
[UI] Replace the remaining non-detachable window delegates with unified window event and input listeners
[UI] Allow listeners to safely destroy or close the window, and to register/unregister listeners without use-after-free and the ABA problem
[UI] Explicit Z ordering of input listeners and UI overlays, top-down for input, bottom-up for drawing
[UI] Add explicit window lifecycle phases
[UI] Replace Window virtual functions with explicit desired state, its application, actual state, its feedback
[UI] GTK: Apply the initial size to the drawing area
[UI] Limit internal UI frame rate to that of the monitor
[UI] Hide the cursor using a timer instead of polling due to no repeated UI thread paints with GPU CP thread presentation, and only within the window
