Applies factors before the MIN/MAX operation - in FSI/ROV via runtime
blending, in FBO/RTV by pre-multiplying shader output when dstFactor is
ONE only, as we don't have access to dest to provide full support as we
do in the FSI/ROV paths.
Enable portability subset physical device enumeration.
Don't use Vulkan 1.1+ logical devices on Vulkan 1.0 instances due to the
VkApplicationInfo::apiVersion specification.
Make sure all extension dependencies are enabled when creating a device.
Prefer exposing feature support over extension support via the device
interface to avoid causing confusion with regard to promoted extensions
(especially those that required some features as extensions, but had those
features made optional when they were promoted).
Allow creating presentation-only devices, not demanding any optional
features beyond the basic Vulkan 1.0, for use cases such as internal tools
or CPU rendering.
Require the independentBlend feature for GPU emulation as working around is
complicated, while support is almost ubiquitous.
Move the graphics system initialization fatal error message to xenia_main
after attempting to initialize all implementations, for automatic fallback
to other implementations in the future.
Log Vulkan driver info.
Improve Vulkan debug message logging, enabled by default.
Refactor code, with simplified logic for enabling extensions and layers.
remove useless memorybarrier
remove double membarrier in wait pm4 cmd
add int64 cvar
use int64 cvar for x64 feature mask
Rework some functions that were frontend bound according to vtune placing some of their code in different noinline functions, profiling after indicating l1 cache misses decreased and perf of func increased
remove long vpinsrd dep chain code for conversion.h, instead do normal load+bswap or movbe if avail
Much faster entry table via split_map, code size could be improved though
GetResolveInfo was very large and had impact on icache, mark callees as noinline + msvc pragma optimize small
use log2 shifts instead of integer divides in memory
minor optimizations in PhysicalHeap::EnableAccessCallbacks, the majority of time in the function is spent looping, NOT calling Protect! Someone should optimize this function and rework the algo completely
remove wonky scheduling log message, it was spammy and unhelpful
lock count was unnecessary for criticalsection mutex, criticalsection is already a recursive mutex
brief notes i gotta run
PM4 buffer handling made a virtual member of commandprocessor, place the implementation/declaration into reusable macro files. this is probably the biggest boost here.
Optimized SET_CONSTANT/ LOAD_CONSTANT pm4 ops based on the register range they start writing at, this was also a nice boost
Expose X64 extension flags to code outside of x64 backend, so we can detect and use things like avx512, xop, avx2, etc in normal code
Add freelists for HIR structures to try to reduce the number of last level cache misses during optimization (currently disabled... fixme later)
Analyzed PGO feedback and reordered branches, uninlined functions, moved code out into different functions based on info from it in the PM4 functions, this gave like a 2% boost at best.
Added support for the db16cyc opcode, which is used often in xb360 spinlocks. before it was just being translated to nop, now on x64 we translate it to _mm_pause but may change that in the future to reduce cpu time wasted
texture util - all our divisors were powers of 2, instead we look up a shift. this made texture scaling slightly faster, more so on intel processors which seem to be worse at int divs. GetGuestTextureLayout is now a little faster, although it is still one of the heaviest functions in the emulator when scaling is on.
xe_unlikely_mutex was not a good choice for the guest clock lock, (running theory) on intel processors another thread may take a significant time to update the clock? maybe because of the uint64 division? really not sure, but switched it to xe_mutex. This fixed audio stutter that i had introduced to 1 or 2 games, fixed performance on that n64 rare game with the monkeys.
Took another crack at DMA implementation, another failure.
Instead of passing as a parameter, keep the ringbuffer reader as the first member of commandprocessor so it can be accessed through this
Added macro for noalias
Applied noalias to Memory::LookupHeap. This reduced the size of the executable by 7 kb.
Reworked kernel shim template, this shaved like 100kb off the exe and eliminated the indirect calls from the shim to the actual implementation. We still unconditionally generate string representations of kernel calls though :(, unless it is kHighFrequency
Add nvapi extensions support, currently unused. Will use CPUVISIBLE memory at some point
Inserted prefetches in a few places based on feedback from vtune.
Add native implementation of SHA int8 if all elements are the same
Vectorized comparisons for SetViewport, SetScissorRect
Vectorized ranged comparisons for WriteRegister
Add XE_MSVC_ASSUME
Move FormatInfo::name out of the structure, instead look up the name in a different table. Debug related data and critical runtime data are best kept apart
Templated UpdateSystemConstantValues based on ROV/RTV and primitive_polygonal
Add ArchFloatMask functions, these are for storing the results of floating point comparisons without doing costly float->int pipeline transfers (vucomiss/setb)
Use floatmasks in UpdateSystemConstantValues for checking if dirty, only transfer to int at end of function.
Instead of dirty |= (x == y) in UpdateSystemConstantValues, now we do dirty_u32 |= (x^y). if any of them are not equal, dirty_u32 will be nz, else if theyre all equal it will be zero. This is more friendly to register renaming and the lack of dependencies on EFLAGS lets the compiler reorder better
Add PrefetchSamplerParameters to D3D12TextureCache
use PrefetchSamplerParameters in UpdateBindings to eliminate cache misses that vtune detected
Add PrefetchTextureBinding to D3D12TextureCache
Prefetch texture bindings to get rid of more misses vtune detected (more accesses out of order with random strides)
Rewrote DMAC, still terrible though and have disabled it for now.
Replace tiny memcmp of 6 U64 in render_target_cache with inline loop, msvc fails to make it a loop and instead does a thunk to their memcmp function, which is optimized for larger sizes
PrefetchTextureBinding in AreActiveTextureSRVKeysUpToDate
Replace memcmp calls for pipelinedescription with handwritten cmp
Directly write some registers that dont have special handling in PM4 functions
Changed EstimateMaxY to try to eliminate mispredictions that vtune was reporting, msvc ended up turning the changed code into a series of blends
in ExecutePacketType3_EVENT_WRITE_EXT, instead of writing extents to an array on the stack and then doing xe_copy_and_swap_16 of the data to its dest, pre-swap each constant and then store those. msvc manages to unroll that into wider stores
stop logging XE_SWAP every time we receive XE_SWAP, stop logging the start and end of each viz query
Prefetch watch nodes in FireWatches based on feedback from vtune
Removed dead code from texture_info.cc
NOINLINE on GpuSwap, PGO builds did it so we should too.
Remove the logger_ != nullptr check from shouldlog, it will nearly always be true except on initialization and gets checked later anyway, this shrinks the size of the generated code for some
Select specialized vastcpy for current cpu, for now only have paths for MOVDIR64B and generic avx1
Add XE_UNLIKELY/LIKELY if, they map better to the c++ unlikely/likely attributes which we will need to use soon
Finished reimplementing STVL/STVR/LVL/LVR as their own opcodes. we now generate far less code for these instructions. this also means optimization passes can be written to simplify/remove/replace these instructions in some cases. Found that a good deal of the X86 we were emitting for these instructions was dead code or redundant.
the reduction in generated HIR/x86 should help a lot with compilation times and make function precompilation more feasible as a default
Don't static assert in default prefetch impl, in c++20 the assertion will be triggered even without an instantiation
Reorder some if/else to prod msvc into ordering the branches optimally. it somewhat worked...
Added some notes about which opcodes should be removed/refactored
Dispatch in WriteRegister via vector compares for the bounds. still not very optimal, we ought to be checking whether any register in a range may be special
A lot of work on trying to optimize writeregister, moved wraparound path into a noinline function based on profiling info
Hoist the IsUcodeAnalyzed check out of AnalyzeShader, instead check it before each call. Profiler recorded many hits in the stack frame setup of the function, but none in the actual body of it, so the check is often true but the stack frame setup is run unconditionally
Pre-check whether we're about to write a single register from a ring
Replace more jump tables from draw_util/texture_info with popcnt based sparse indexing/bit tables/shuffle lookups
Place the GPU register file on its own VAD/virtual allocation, it is no longer a member of graphics system
For more optimal usage of exports and the parameter cache on the host regardless of how effective the optimizations in the host GPU driver are. Also reserve space for Vulkan/Metal/D3D11-specific HostVertexShaderTypes to use one more bit for the host vertex shader type in the shader modification bits, so that won't have to be done in the future as that would require invalidating shader storages (which are invalidated by this commit) again.
Float24-as-float32 depth bias is now in the increments of 8, because conversion of the depth to float24 directly in the pixel shaders may destroy the bias qualitatively otherwise if it's too small.
- Mainly use `assert`s, since failure is very rare
- Forward failure of `CreateSemaphore` to guests because it is more easy
to trigger with invalid initial parameters.
[GPU] Add FXAA post-processing
[UI] Add FidelityFX FSR and CAS post-processing
[UI] Add blue noise dithering from 10bpc to 8bpc
[GPU] Apply the DC PWL gamma ramp closer to the spec, supporting fully white color
[UI] Allow the GPU CP thread to present on the host directly, bypassing the UI thread OS paint event
[UI] Allow variable refresh rate (or tearing)
[UI] Present the newest frame (restart) on DXGI
[UI] Replace GraphicsContext with a far more advanced Presenter with more coherent surface connection and UI overlay state management
[UI] Connect presentation to windows via the Surface class, not native window handles
[Vulkan] Switch to simpler Vulkan setup with no instance/device separation due to interdependencies and to pass fewer objects around
[Vulkan] Lower the minimum required Vulkan version to 1.0
[UI/GPU] Various cleanup, mainly ComPtr usage
[UI] Support per-monitor DPI awareness v2 on Windows
[UI] DPI-scale Dear ImGui
[UI] Replace the remaining non-detachable window delegates with unified window event and input listeners
[UI] Allow listeners to safely destroy or close the window, and to register/unregister listeners without use-after-free and the ABA problem
[UI] Explicit Z ordering of input listeners and UI overlays, top-down for input, bottom-up for drawing
[UI] Add explicit window lifecycle phases
[UI] Replace Window virtual functions with explicit desired state, its application, actual state, its feedback
[UI] GTK: Apply the initial size to the drawing area
[UI] Limit internal UI frame rate to that of the monitor
[UI] Hide the cursor using a timer instead of polling due to no repeated UI thread paints with GPU CP thread presentation, and only within the window
