761e91de96
The library enumerator kept only names containing VOICE or \Briefing\, and read eng\sounds.tbl unconditionally. So the Explorer could reach 4382 of the 9519 banks in sound.pak: no music, no jingles, no sound effects, and no Japanese voice at all -- roughly half the disc's audio had no route to the UI. `slb::list_audio_entries` now returns every named bank with the category its path implies (Music / Jingles / Sound effects / Radio / Dialogue / Movie voice / Briefing). `list_voice_clips` is that, restricted to the spoken categories, so its existing test still guards the old behaviour. The 36 root banks carry no language component and appear whichever table is read; the window gets an English/Japanese switch that re-reads the other sounds.tbl, since the table name IS the selector. Two defects the decode found, both recorded in docs/re/structures/sound-pak-contents.md: * `Static.slb` -- the SFX bank -- declares 616768 bytes more than sound.p04 holds. Not our extraction: p04 matches the ISO's own directory record, and a sweep of every pak on the disc finds this one entry over-running and no other. It is the highest-offset entry, so its comp_size is an allocation size. A short read is now allowed for the tail entry ONLY; any other overrun stays an error, because clamping it would hide real damage behind a half-decoded asset. The bank went from unreadable to 514 s of audio. * the left-channel downmix was applied to everything. Right for voice (mono content however stored), wrong for music (a real stereo mix, half of it discarded). The caller now decides from the category. 35 of the 36 shared banks decode; JNGL_001 does not, and says so in the player instead of the panel silently closing. Its payload is not a whole number of XMA1 packets from any known data offset, so it is likely not a plain headerless stream -- written up rather than papered over. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reverse-engineering knowledge base
This directory is the spec-side of the clean-room: it records what the original Project Sylpheed binary does (behaviour) and how its data is laid out, so that the Rust port can be implemented from these specs without re-deriving anything and without ever copying original code.
It exists to answer one question fast: "do we already know how X works, and how sure are we?"
The one rule that matters
Never document a claim more confidently than the evidence supports, and never paste original code here.
A wrong-but-confident note is worse than no note: someone builds on it and the bug hides for weeks. Every entry therefore carries an explicit confidence and its evidence. This mirrors the project method — measure the oracle, never infer; refute before believing.
Clean-room firewall
- ✅ Allowed: behaviour descriptions, field offsets/types, formulas, state machines,
observed input→output pairs, and references to the original by address
(
sub_821B68C0) or toxenia-rs/sylpheed.db. - ❌ Forbidden here and in
crates/: pasted decompiled C/C++ or verbatim disassembled function bodies presented as the thing to reimplement. Cite the address; describe the behaviour in your own words. Disassembly is a tool for understanding, not a source to copy.
Confidence levels
| Level | Meaning | Bar to reach it |
|---|---|---|
CONFIRMED |
Behaviour verified against ground truth. | ≥2 independent observations or one observation cross-checked against an oracle (canary framebuffer, a known-correct value, a second code path). |
PROBABLE |
Strong single-source inference. | One clean observation, or an unambiguous static read of the disassembly. |
HYPOTHESIS |
Educated guess, not yet tested. | Anything else. Must say what would confirm/refute it. |
The status markers
The table above is the confidence scale. The markers that appear in
BACKLOG.md and the structures/ pages are a separate, and until now undefined,
vocabulary. They mean:
| Marker | Meaning |
|---|---|
| ✅ | Confirmed — verified against ground truth. |
| 🟡 | Partial: true as far as it goes, or true under a stated assumption. |
| ❔ | Open question. Nobody has answered it yet. |
| 🔴 | Refuted — shown false — or blocked by something the container cannot do. |
| ❌ | A specific claim that was tried and failed. Prefer 🔴. |
| 🚧 | Work started and not finished. |
🔴 never means "we have not run it yet." That is ❔ or 🚧. Reserve 🔴's "blocked" sense for a real limit of the box — no push credentials, no hardware Vulkan (lavapipe only), or a decision only the user can make. The box can run the emulator, script input, screenshot, read guest memory, and build and test Rust, so "needs a run" is never a blocker. This paragraph exists because the marker was undefined for 98 uses and three of them were mislabelled that way.
Promotion requires new evidence, not re-reading the old evidence. A HYPOTHESIS that
"looks right again" is still a HYPOTHESIS. Only an independent check promotes it.
If evidence later contradicts an entry, demote it and record the contradiction — do
not silently edit the conclusion.
When to document
- Right after a function/structure crosses from
HYPOTHESISto at leastPROBABLE— before moving to the next code path, so the knowledge isn't lost or re-derived. - Whenever confidence changes (up or down) — append to the Evidence log, don't overwrite.
- Not while it's still a pure guess with no evidence — a one-liner in the relevant backlog/plan is enough until there's something to stand on.
What to document
- Functions/code paths →
docs/re/functions/<name>.md(one file per function or tight cluster). - Data structures / formats →
docs/re/structures/<name>.md. - Keep the index in
INDEX.md(one line each: name · confidence · one-line summary).
Use the templates: _TEMPLATE.function.md,
_TEMPLATE.structure.md.
How we find and confirm code paths (the toolchain)
Everything joins on the guest virtual address (PC) — code addresses are fixed by the XEX load, identical across our emulator and canary.
- Static (cheap, try first):
xenia-rs/sylpheed.db(DuckDB: 25 481 functions, xrefs, strings, vtables, imports). Query withxenia-rs/zq.py—zq.py grep <str>,zq.py xref <addr>,zq.py dis <lo> <hi>,zq.py fn <pc>. Entry points are usually a string (zq.py grep MSG_DEMO) or an import (movie/XMA API) xref'd back to the loader. - Dynamic (when static is ambiguous): run
xenia-rswith its probe suite —--pc-probe/--audit-pc-probe-hex(fires at block entry),--mem-watch(mid-block reads/writes of a VA),--lr-trace(call/return chains),--trace-instructions,--dump-addr(read guest memory). These already exist; prefer them over hacking canary. - Oracle (correctness ground truth): canary — the Wine cross-build
xenia-canary/build-cross/bin/Windows/Debug/xenia_canary.exe(the native Linux ELF crashes / does not run — do not use it). This is the only emulator that reaches the in-game menu; ourxenia-rsnever got past the intro video. Use canary to observe output (capture its framebuffer for texture colours), not usually to instrument code — though itsbuild-crosstoolchain does compile, so small C++ probes + rebuild are possible when needed. Run muted, one emulator process at a time, point it at the real ISO (not the symlink).
⚠️ VA-equality caveat: join code by PC (fixed), but never assume a data VA holds the same bytes across emulators — allocators differ. Compare data by content/layout.