dd7edd5e38
sylpheed-port corrected the disc figure I compared against: the leaf's final segment HOLDS, so a cycle length is not a motion duration. Verified from the disc rather than accepted -- pteff03 moves over t=0..540 of a 600-unit cycle (4.000 px/unit, not 3.600) and pteff03a over 0..630 of 720 (4.063, not 3.556). Checking that sent me back to my own measurement, which was worse. "6-7 px/frame" came from eyeballing deltas between consecutive APPEARANCES in a capture that skips frames, so a delta of 7 often spans two frames. A least-squares fit of x against frame over all 132/112 points gives +4.287 and -4.348 px/frame, with rms residuals of 3.6 and 3.3 px. So the confirmation I reported was a prediction 20 % too low meeting a measurement 50 % too high. Neither number was right and the agreement was an artefact of both being wrong -- which is the most dangerous form of agreement in this corpus, because nothing about it looked suspicious. The corrected numbers say something larger than the claim they replace. Measured against declared: 4.287/4.000 = 1.072 units per frame, and 4.348/4.063 = 1.070. Two independent strips with different cycle lengths and different declared rates agree to three significant figures. Q1 establishes 2 units per RENDERED frame for top-level elements. So either a nested leaf record advances at about half the top-level rate, or Q1's factor does not apply to nested records. Measured, not explained, and flagged as deserving its own iteration because Q1 is load-bearing. One untested candidate recorded: 1 unit per 1/30 s of game time against the ~28.5 fps this corpus measures for the idle title gives 1.053, close to 1.07. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Wuu56cE8vJGTBtn1ppsk8v
Reverse-engineering knowledge base
This directory is the spec-side of the clean-room: it records what the original Project Sylpheed binary does (behaviour) and how its data is laid out, so that the Rust port can be implemented from these specs without re-deriving anything and without ever copying original code.
It exists to answer one question fast: "do we already know how X works, and how sure are we?"
The one rule that matters
Never document a claim more confidently than the evidence supports, and never paste original code here.
A wrong-but-confident note is worse than no note: someone builds on it and the bug hides for weeks. Every entry therefore carries an explicit confidence and its evidence. This mirrors the project method — measure the oracle, never infer; refute before believing.
Clean-room firewall
- ✅ Allowed: behaviour descriptions, field offsets/types, formulas, state machines,
observed input→output pairs, and references to the original by address
(
sub_821B68C0) or toxenia-rs/sylpheed.db. - ❌ Forbidden here and in
crates/: pasted decompiled C/C++ or verbatim disassembled function bodies presented as the thing to reimplement. Cite the address; describe the behaviour in your own words. Disassembly is a tool for understanding, not a source to copy.
Confidence levels
| Level | Meaning | Bar to reach it |
|---|---|---|
CONFIRMED |
Behaviour verified against ground truth. | ≥2 independent observations or one observation cross-checked against an oracle (canary framebuffer, a known-correct value, a second code path). |
PROBABLE |
Strong single-source inference. | One clean observation, or an unambiguous static read of the disassembly. |
HYPOTHESIS |
Educated guess, not yet tested. | Anything else. Must say what would confirm/refute it. |
The status markers
The table above is the confidence scale. The markers that appear in
BACKLOG.md and the structures/ pages are a separate, and until now undefined,
vocabulary. They mean:
| Marker | Meaning |
|---|---|
| ✅ | Confirmed — verified against ground truth. |
| 🟡 | Partial: true as far as it goes, or true under a stated assumption. |
| ❔ | Open question. Nobody has answered it yet. |
| 🔴 | Refuted — shown false — or blocked by something the container cannot do. |
| ❌ | A specific claim that was tried and failed. Prefer 🔴. |
| 🚧 | Work started and not finished. |
🔴 never means "we have not run it yet." That is ❔ or 🚧. Reserve 🔴's "blocked" sense for a real limit of the box — no push credentials, no hardware Vulkan (lavapipe only), or a decision only the user can make. The box can run the emulator, script input, screenshot, read guest memory, and build and test Rust, so "needs a run" is never a blocker. This paragraph exists because the marker was undefined for 98 uses and three of them were mislabelled that way.
Promotion requires new evidence, not re-reading the old evidence. A HYPOTHESIS that
"looks right again" is still a HYPOTHESIS. Only an independent check promotes it.
If evidence later contradicts an entry, demote it and record the contradiction — do
not silently edit the conclusion.
When to document
- Right after a function/structure crosses from
HYPOTHESISto at leastPROBABLE— before moving to the next code path, so the knowledge isn't lost or re-derived. - Whenever confidence changes (up or down) — append to the Evidence log, don't overwrite.
- Not while it's still a pure guess with no evidence — a one-liner in the relevant backlog/plan is enough until there's something to stand on.
What to document
- Functions/code paths →
docs/re/functions/<name>.md(one file per function or tight cluster). - Data structures / formats →
docs/re/structures/<name>.md. - Keep the index in
INDEX.md(one line each: name · confidence · one-line summary).
Use the templates: _TEMPLATE.function.md,
_TEMPLATE.structure.md.
How we find and confirm code paths (the toolchain)
Everything joins on the guest virtual address (PC) — code addresses are fixed by the XEX load, identical across our emulator and canary.
- Static (cheap, try first):
xenia-rs/sylpheed.db(DuckDB: 25 481 functions, xrefs, strings, vtables, imports). Query withxenia-rs/zq.py—zq.py grep <str>,zq.py xref <addr>,zq.py dis <lo> <hi>,zq.py fn <pc>. Entry points are usually a string (zq.py grep MSG_DEMO) or an import (movie/XMA API) xref'd back to the loader. - Dynamic (when static is ambiguous): run
xenia-rswith its probe suite —--pc-probe/--audit-pc-probe-hex(fires at block entry),--mem-watch(mid-block reads/writes of a VA),--lr-trace(call/return chains),--trace-instructions,--dump-addr(read guest memory). These already exist; prefer them over hacking canary. - Oracle (correctness ground truth): canary — the Wine cross-build
xenia-canary/build-cross/bin/Windows/Debug/xenia_canary.exe(the native Linux ELF crashes / does not run — do not use it). This is the only emulator that reaches the in-game menu; ourxenia-rsnever got past the intro video. Use canary to observe output (capture its framebuffer for texture colours), not usually to instrument code — though itsbuild-crosstoolchain does compile, so small C++ probes + rebuild are possible when needed. Run muted, one emulator process at a time, point it at the real ISO (not the symlink).
⚠️ VA-equality caveat: join code by PC (fixed), but never assume a data VA holds the same bytes across emulators — allocators differ. Compare data by content/layout.