fabi/Syplheed-Reborn
Archived
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

re: counter-example weakens the probe-causes-freeze correlation

Browse Source 
A pilot-only run froze at t~150.7s (frozen.py: max_pixel_delta=0), found by
accident when the sweep-free experiment aborted at startup and the run flew with
no script probe attached. The tally is now 3-of-3 frozen with the probe versus
1-of-3 without, not 3-versus-0. Still a lean, but not the clean separation the
previous entry claimed, and marked down accordingly -- the fourth time a freeze
conclusion here has had to be softened by one more run.

The sweep-free test itself could not run: ScriptMission is re-allocated per run,
so the address from an earlier run (0xBC7A2A20) read back all zeros. The cheap
self-consistency check ([m+44] must equal the phase's [+244]) rejected it
instead of reporting garbage, which is the part that worked.

Names the cheaper replacement: a BOUNDED pointer scan. Every ScriptMission seen
so far sits in 0xBC79xxxx-0xBC7Axxxx, so ~32MB instead of ~371MB would cut the
sweep cost roughly tenfold. Not yet implemented.
This commit is contained in:
Sylpheed RE agent
2026-08-25 15:38:23 +00:00
parent d086586a0f
commit 22b6541cd9
2 changed files with 70 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

38
docs/re/mission-freeze-resume-spin.md
View File

@@ -1217,3 +1217,41 @@ cause; if they continue, the per-sample reads are.
**Cost so far:** three attempts to observe a phase advance, all truncated inside
four minutes by a freeze the probe itself may be causing. The arrival transition
at ~143 s was caught only because it happens early.
## 🟡 2026-08-25 — a counter-example weakens the probe correlation
The previous entry made the probe the leading suspect on a clean 3-versus-2
split. **A pilot-only run has now frozen too**, and it came from an accident: the
sweep-free experiment aborted at startup (below), so the run flew with *no*
script probe attached at all. Its pilot state went identical at **t ≈ 150.7 s**
and `frozen.py` confirms `max_pixel_delta=0`.
| probe attached | clean | frozen |
|---|---|---|
| pilot only | 936 s, 1064 s | **150 s** |
| pilot + `phase_watch.py` | — | 70 s, 126 s, 253 s |
So it is **3-of-3 with the probe versus 1-of-3 without**, not 3-versus-0. That is
still a lean, but it is no longer the clean separation the last entry described,
and I am marking it down rather than keeping the stronger reading. This is the
fourth time in this investigation a freeze conclusion has had to be softened by
one more run.
**What would actually settle it** is unchanged and now clearly worth the cost:
alternate probe-on and probe-off windows *within* a single run, several runs, and
compare freeze rate per unit of mission time. Between-run comparisons at n≈3
keep producing splits that the next run erodes.
## 🔴 The sweep-free test could not run: the ScriptMission moves
The plan was to skip `find_mission()`'s two memory sweeps by passing an address
from an earlier run. It does not survive: `0xBC7A2A20` read back **all zeros**
this run, and the cheap self-consistency check (`[m+44]` must equal the phase's
`[+244]`) **rejected it** rather than reporting garbage — which is the one thing
that went right here.
So the object is re-allocated per run and a hard-coded address is not viable.
The sweeps still need replacing to run the experiment; the cheaper version is a
**bounded** pointer scan — every ScriptMission seen so far sat in
`0xBC79xxxx–0xBC7Axxxx`, so scanning ~32 MB instead of the full ~371 MB would cut
the cost roughly tenfold while still finding it. Not yet implemented.

37
tools/re-capture/phase_watch.py
View File

@@ -14,7 +14,14 @@ It also does two things the earlier probes had to learn the hard way:
* re-locates the ScriptMission if the pointer stops validating, rather than
silently reporting stale numbers.
Usage: phase_watch.py <Stage02.ssb> [secs] [every_s]
`--mission 0x...` skips the two full guest-memory sweeps `find_mission()` does
and validates the given address with a handful of reads instead. That exists
because the sweeps are the leading suspect for the in-mission freeze: runs with
this probe attached froze at ~70/126/253 s, while the same runs without it went
936 s and 1064 s clean (mission-freeze-resume-spin.md). Sweep-free mode is the
experiment that separates "the sweeps do it" from "the per-sample reads do it".
Usage: phase_watch.py <Stage02.ssb> [secs] [every_s] [--mission 0xADDR]
"""
import os
import sys
@@ -33,15 +40,35 @@ def main():
sym2 = isl.symbols(ssb, 2)
secs = float(sys.argv[2]) if len(sys.argv) > 2 else 900
every = float(sys.argv[3]) if len(sys.argv) > 3 else 5
given = None
if '--mission' in sys.argv:
given = int(sys.argv[sys.argv.index('--mission') + 1], 0)
path = gmem.mem_path()
size = os.path.getsize(path)
import frozen
t0 = time.time()
with open(path, 'rb', buffering=0) as f:
m, fb = S.find_mission(f, size, ssb)
if m is None:
print('ScriptMission not located'); return 1
print('file base 0x%08X ScriptMission 0x%08X' % (fb, m), flush=True)
if given is not None:
# Validate WITHOUT sweeping: the mission's symtab1 pointer must equal
# the phase's, and the code base must be a plausible pointer. Both
# are self-consistency checks internal to the two objects, so they
# cost four reads instead of two full scans.
code = S.u32(f, given + 24)
s44 = S.u32(f, given + 44)
ph = S.u32(f, given + 4)
p244 = S.u32(f, ph + 244) if ph else None
ok = (code and 0x10000 <= code < 0xFFFFFFF0 and s44 and s44 == p244)
if not ok:
print('given ScriptMission 0x%08X does not validate '
'(code=%s s44=%s phase244=%s)' % (given, code, s44, p244))
return 1
m, fb = given, None
print('ScriptMission 0x%08X (given, validated, NO sweeps)' % m, flush=True)
else:
m, fb = S.find_mission(f, size, ssb)
if m is None:
print('ScriptMission not located'); return 1
print('file base 0x%08X ScriptMission 0x%08X' % (fb, m), flush=True)
last = None
next_frozen = 0.0
while time.time() - t0 < secs: