With the pilot finally shooting, the experiment completed both halves. Sample A
at counter 12 over 120 entities gave 2 offsets where exactly 12 entities share a
value; the counter then went 12 -> 11 and NEITHER survived. So within +-0x400 of
an entity's position triple there is no 4-byte word whose shared-value population
tracks REMAINING OB.
The limits are recorded as part of the result, because they bound it: the test
asks which entities share an EXACT 32-bit value, so a single bit ORed into a word
that also carries health or a timer would never show up - a bit-level version of
the same differential is the follow-on. Anything outside the window, or on
entities that entities2 cannot see (it types by position CHANGING, so stationary
objectives are invisible), is untested too, and the populations differed a lot
between samples - 120 against 194.
Separately: REMAINING OB went 12 -> 11, the first decrement of this whole
investigation, while pilot.py logged 411 fire=1 samples and the HUD reached YOU
KILLED WARPLANES 0003. Stated carefully - it does NOT show the counter counts
kills, since an earlier run had the hostile population fall by a third with no
movement; it shows some kills close something the counter tracks.
Two robustness fixes: ob_flag retries an empty entity sample (one void run was
caused by exactly that), and Pad releases everything on interpreter exit - a
file-backed pad PERSISTS after its writer dies, so a tool killed mid-press would
leave a button held and the game would walk through menus on its own.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
Measured, not argued: command a 45-degree-off-the-nose error and watch whether it
shrinks, both axes, both sides, two pulse widths, with the opposite sign as a
control. Yaw's sign is correct (45 -> 11.3/32.7 at 0.6 s, 41.6/33.8 at 1.2 s).
Pitch's is inverted - the pilot's own sign GREW the error every time
(48.3/55.6/70.7/91.7) and the opposite shrank it every time (30.7/41.5/15.7/9.6).
A method artefact is recorded because it gave the opposite answer first: a 3 s
full-deflection pulse overshoots a 45-degree error so far that BOTH signs look
wrong (45 -> 164 and 45 -> 178). A long pulse cannot answer a sign question.
Verified against the game rather than by inspection. Before: fire=1 in 0 of 13521
samples, |aim yaw| pinned at 90.0, target 36-43 km away. After: 43 of 1732, aim
down to 2.3 degrees, range median 6.3 km, and the HUD's own ammunition counters
moving - NOSE BM 06000 -> 05723, MAIN MPM 00300 -> 00298.
Also fixed a leftover of the same FIFO era: pilot.py called pad.f.write("tap A
90") for the target-select double tap, which raised AttributeError once Pad
stopped having an `f`. Pad gained tap()/dpad(); ctrl_probe.py and target_probe.py
still use pad.f and now say so in place.
Still open: YOU KILLED is 0000 after 250 s of firing and REMAINING OB is still
012. The craft shoots, closes and selects; whether it destroys anything is next.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
The control this file never had: a run with the Kernel channel on, analysed WHILE
STILL FLYING, has 2738 refused resumes on one pair - more than the frozen run's
1171. The target's own lines show why. The game runs a self-suspending worker
(NtSuspendThread on itself, a manager thread resumes it, thousands of times), and
a self-suspended thread is not host-suspended, so the host Resume legitimately
returns false EVERY cycle: 3115 refusals against 3115 resumes.
The error is named rather than buried: the warning's commit says "~7 times in a
normal boot" and this file generalised that from boot to gameplay, where the
number is thousands. The 150x anomaly was an artefact of the baseline. The
zero-CPU threads go with it - the healthy run has four of those too.
What the instrumented reproduction DOES establish is sharper than the lead was.
The last kernel event in 690000 lines is "Thread F8000204 self-suspending", with
self-suspends 3116 against resumes 3115 - but the resumer never issues another
NtResumeThread at all, so nothing was dropped in flight; every thread stopped
together. And the guest is SPINNING, not deadlocked: over 10 s while frozen the
main thread is in state R gaining 409 ticks and guest threads gain ~680 in total
while making not one kernel call. So it is guest code waiting on something in
guest memory, and the next question is which guest PC.
Two corrections fall out: "the log stopped growing" is not a freeze detector (it
goes quiet for 25 s in normal flight), and 0xbdb59668 held the counter again -
4 of 6 runs now.
freeze_report.py makes the analysis repeatable, and refuses to answer "did this
thread ever run" when the Kernel channel was off rather than reporting a false NO.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
A Stage 02 run froze at TIME 01:02 with a radio line caught mid-word. The
emulator was alive at ~200% CPU with its main thread in state R, two screenshots
six seconds apart were byte-identical, and the log ended in a spin: 1171 of the
run's 1200 "host resume was refused" lines are the single pair F80002AC ->
F8000240, starting at the line immediately after F80002AC is created, and the log
never grows again. The commit that added that warning records what normal looks
like - about 7 in a whole boot - so this is a 150x anomaly on one pair rather
than noise. F8000240 itself appears exactly once outside the spin, at creation,
and calls nothing.
Eleven of the frozen process's 79 host threads have zero CPU, four of them
consecutive late-created guest threads - the same signature as the lost resume
that c1b57f93b fixed for the title screen. That fix IS in this build, so either
there is a second window in that race or this only looks alike.
The inference is named as one: nothing here maps a guest handle to a host tid, so
"the zero-CPU threads are the ones being resumed" is a reading of two consistent
observations. And the refusals could equally be the game's reaction to a worker
stuck for another reason - log_mask=13 has the Kernel channel disabled, so not
one of F8000240's waits is visible. The next experiment is written down
concretely: reproduce with LOG_MASK=12 LOG_LEVEL=3 and map the handle to a tid.
Also caps ob_hunt's survivor listing at 40 - an aborted run printed all 21482 and
buried the line that mattered.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
Three things from one Stage 02 run.
The address recurs a third time: HUD=4 RAM=4 at 0xbdb59668, so 3 of the 5 runs
measured put the counter exactly there.
The counter is NOT a live class head-count. With the counter at 4 the typed
entity list was 8 attackers, 7 friendly Delta Sabers, 7 turrets and the player -
no class has 4 members and no pair of them sums to 4. That sharpens the corpus's
existing "012 against 118 live ADAN" note from "not the hostile count" to "not
the count of any class this enumeration can see".
The flag experiment itself proves nothing, and why is the useful part. It found
20 offsets where exactly 4 of 23 entities agree, then reported "the counter never
moved" for 600 s. The guest had stopped advancing ten seconds into flight:
pilot.py logged 724 s of identical speed/yaw/pitch, and two screenshots six
seconds apart were byte-identical, max delta 0 over 863325 pixels - while
screen_id said "flight", the emulator burned 212% CPU and every liveness check
passed. So that was a fact about a dead world. Withdrawn along with it: the claim
in ob_session.sh that the counter climbs on its own in the first minutes, which
one advancing run supports and this one cannot.
frozen.py makes it a single call, checked in both directions (0 on the frozen
pair, 254 on two frames of a live run), and ob_hunt/ob_flag now say GUEST FROZEN
rather than waiting out their timeouts.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
One filter to select (004 -> 008, 35897 -> 7), a second on a transition it was
NOT selected by (008 -> 012, 7 -> 1), leaving exactly one address; then three
live paired readings, RAM/screenshot/RAM, all agreeing with the HUD.
The address is the same one run 1 reported. That does NOT reverse yesterday's
refutation and the entry says so explicitly: runs 2 and 3 read a hard 0 there on
an allocated page while the HUD counted, so "it is there in every run" stays
refuted. What is withdrawn is the stronger claim that the number was meaningless
- it recurs exactly, in 2 of the 4 runs measured, and run 3's amber candidate
0xbdb49668 sits one 64 KB page below it at the identical page offset 0x9668. The
practical rule is therefore: try 0xbdb59668, check it against the HUD, re-scan
when it reads 0.
Why run 3 failed and run 4 did not is also recorded, because it is a method
lesson rather than luck: the evidence was always in the first four minutes of the
stage, and the earlier runs simply could not look often enough - every HUD
reading cost a human round trip, so the 008 step went by between two of them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
Two separate reasons the scripted route stopped, both measured rather than guessed:
* LOAD -> READY ROOM is not 28 s. Both runs on 2026-08-23 overran it, so the next
press was eaten by the transition and the run ended up in OPTIONS once and
BRIEFINGS once. wait_screen.sh now waits for the screen, with an optional
--tap that clears a dialog the caller cannot know about (a freshly restored
profile inserts "Auto-Save is active. OK?" here).
* The READY ROOM is DRAWN long before it is USABLE: it comes up with a
"Preparing to Sortie" spinner and TAKE OFF greyed out. The two states differ by
1.7 units of blue whole-image, so screen_id.py cannot separate them and should
not try. take_off_armed.py tests the label instead: 0.0000 bright pixels while
preparing, 0.1633 once armed, on three captures from two runs. It carries its
own position check - the always-enabled BRIEFINGS label below reads 0.1027 in
all three, to four decimals, so if that reference is dark the boxes are off the
labels and the answer is "unknown", not a confident wrong one.
screen_id.py gains a "readyroom" class from the same measurements; nothing else
reclassifies.
Verified end to end and unattended: boot -> title -> LOAD GAME -> slot 01 ->
READY ROOM -> TAKE OFF -> "IN FLIGHT at 34s", pilot bound and engaging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
0xbdb59668 reads 0 in two independent Stage 02 runs while the HUD counts
004 -> 008 -> 012. Not an unmapped read: SEEK_DATA at that offset returns the
offset itself and the next hole is 5 MB later, so it is an allocated,
zero-filled word. The address was a per-run artefact, exactly as that file
already suspected it might be; the method is the durable result.
Re-finding it in the new run also failed, and both failures are recorded because
they are the instructive part. Two candidates were produced and both died on the
corpus's own rule -- verify across a transition you did not select on:
0xbc2377dc went 12 -> 18 while the HUD stayed 012 and read 3 two minutes later,
and 0xbd295b04 was plain noise.
One correction to the method note in that file: the scan is not slow. Over the
live /dev/shm image it takes 0.9 s. The real trap is that REMAINING OB climbs
004 -> 012 within about four minutes as waves spawn, so a scan is only valid if
the HUD is confirmed to hold the same value immediately before AND after it --
which is why the earlier 4-then-8 intersection came back empty.
What blocked finishing: with pilot.py retired at hull 340/1500 nothing was
killing objectives and the counter sat at 012 for five minutes, so there was no
later transition to filter on. What the counter counts, and whether an OB-badged
entity carries a flag, is untouched.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
The baseline binary, the profile, the Stage 02 save and the caches all live
outside both repos and had been wiped, and sylph-doctor reports 'all good'
without them. This is the recipe, verified by driving it to Stage 02 flight
rather than by inspecting files.
Three things worth having found:
* the baseline is an INCREMENTAL build, not a scratch one -- auto/upstream-baseline
differs from the instrumented branch in 202 files and zero submodule gitlinks,
so checking it out in the shared tree and rebuilding into the existing build dir
takes ~9 min at -j4. git worktree prune first; a dead worktree still claims the
branch.
* the baseline CANNOT make a profile (--create_profile_if_none is one of our 50
commits) and the Sign In dialog cannot be typed into, so bootstrap the profile
with the instrumented binary once and run the baseline against it.
* the Xbox content .header is NOT needed -- ContentManager::ListContent falls back
to the directory name when ReadContentHeaderFile fails, checked in the source.
The LOAD GAME screen then shows date, difficulty, flight time and clear ratio
anyway, which proves those come out of savedata itself. No header was fabricated.
Trap paid for once: keep the file name xenia_canary. A copy saved as
xenia_canary.baseline-... survives every pkill -x in the toolkit and holds the
run-canary lockfile while ps -C xenia_canary shows nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PMRJjbxLqZtsb5Vb7KunPE
Built upstream/canary_experimental (a5a18f5c7, 82 commits ahead of our merge
base) clean, to answer whether the 0x82307128 mission crash is ours or theirs.
Two tooling gaps found building it: version.h is never generated (upstream's
xenia-build.py writes it, build-canary does not invoke it, and our tree only
builds because a stale copy from an old sylpheed-re build sits in the build dir),
and build-canary reports exit 0 on a FAILED build - only the missing binary gave
it away.
Pure upstream cannot be driven at all: --hid=file is ours and there is no uinput
here. So the honest baseline is upstream plus those three pad commits. That
baseline reproduced the LOST RESUME on its second boot - black screen, guest at
522% CPU, newest host thread at 00:00:00 CPU, zero kernel calls from its handle -
and upstream's threading_posix.cc still has the two-lock-scope publish. So pure
upstream is not a stable state; it carries a bug we had already fixed.
Adding ONLY the threading fix on top - still none of the RE instrumentation -
reaches Stage 02 FLIGHT: TIME 05:03.75, wingman Rhino 103, radio dialogue, and
REMAINING OB 020 with OB badges on targets. The run ended in a legitimate GAME
OVER (the unattended craft was shot down, as autopilot-memory-driven.md warns),
not a crash. Crash dumps for the whole run: 0, against 384 on the instrumented
branch at the briefing alone.
So the mission crash is not upstream's. Whether it is in our 50 commits or fixed
among upstream's 82 this run does not separate; that needs a bisect.
REMAINING OB is visible and moves (020->019->018->017) but is NOT found. A
three-snapshot BE-u32 filter left 0 survivors; a differential across widths gave
exactly one candidate, 0xbc22e83c, and it is REFUTED - read live it held 26 while
the HUD showed 017. The empty u32 filter is itself informative: the counter is
not a plain persistent big-endian word.
Finding REMAINING OB in RAM means getting to the escort stage, and
launch_mission.sh exists for exactly that. It carried three of the dead patterns
this session has been clearing: six vgamepad calls (the command no longer exists,
so the entire scripted route pressed nothing), the XUID E0300000EFBEA3D4 which
has no profile behind it and therefore opens the sign-in dialog that swallows
every keystroke, and the emulator's stdout going to /dev/null. wait_flight.sh had
a fourth, in the tap that skips the launch cinematic.
Fixed, the route works far past where it used to stop: boot -> title -> LOAD GAME
-> slot 01 -> READY ROOM -> TAKE OFF -> the Stage 02 briefing map, with ACROPOLIS
labelled on it.
And it stops there: 384 dumps at PC 0x82307128 and no flight HUD within 300s. The
briefing is still animating (two shots a minute apart differ by RMSE 2986), so
the emulator is not frozen - flight simply never starts.
One discriminator worth recording: the TUTORIAL reaches flight and has run
completely crash-free, while this path crashes during the briefing, which is
where the stage content loads. That is consistent with the cache-flush shape the
crash has always had, and points at WHAT is being loaded rather than at how far
the navigation gets.
REMAINING OB is therefore still not found - the mission was never entered.
The autopilot doc's own problem #2 is that the pilot ignores the mission
objective - its 300s run took no damage, killed one fighter, and watched
REMAINING OB RISE from 004 to 011. So this surveys where that knowledge is.
GP_TUTORIAL.pak yields the game's own list of what a player can do: BASIC
CONTROLS, HEADS-UP DISPLAY, RADAR, SUPPLY AND SPECIAL MOVES, RADIO ORDERS,
ADVANCED CONTROLS, with descriptions. Worth stating against what the pilot
actually does: pilot.py and navigator.py use move and attack only. Resupply,
special moves, radio orders to wingmen and advanced maneuvers are all unused, and
two of them bear directly on open problems - resupply is the untested RETIRE
mode, radio orders is an escort lever that flying skill does not substitute for.
tables.pak is a name-resolved config seam: 79 IDXD objects, 6275 distinct field
names, including DLG_MISSION_OBJECTIVE and DLG_STAGE_TITLE01..16 (so 16 stages).
GP_MAIN_GAME_<lang>.pak holds 131 weapon\ tables, 113 unit\ and 64 message\ -
the weapon ones being what problem #1 wants for real projectile speed and range.
But the objective TEXT is not text: DLG_MISSION_OBJECTIVE = pdscr099.prt, a
screen part, and the message tables resolve to face textures. All human-readable
text in this game is rendered sprite art, which is why the UI work has been
reading pixels all along. A per-mission objective table is an OCR job, not a
table dump - so the cheaper and more actionable route is the runtime REMAINING OB
counter, which is on the HUD and therefore in RAM.
ship_capture_window.sh polls for the flight screen and presses F10 the moment it
appears rather than after a fixed sleep. One run gave three results.
First, the mission ran with ZERO crashes through t+152s - the first clean mission
run, where the three before it ended at 13243 / 11898 / 11497 - and it renders
and plays: player ship, starfield, full HUD, no dialog.
Second, the capture armed and wrote its file, so the mechanism works in-mission.
Third, and against expectation, the file holds NO ship geometry. 329KB, 181
deduped draws: 180 of them share a single vertex shader, all stride=28 vcount=3
prim=8 at full-screen coordinates, plus one full-screen quad, and not one draw
has positions outside the 1280x720 rectangle. The budget is not the limit -
kShipCaptureBudget is 8000 and only 181 distinct (vbase, WVP) pairs were seen -
and the scene was definitely drawing. The known-good capture from an earlier
session is 2.9 MB.
Fourth, a correction to the previous commit. It said the cache is "REFUTED as the
cure". Too strong: this run used the IDENTICAL complete cache as tut4 and
produced 0 crashes against tut4's 11497. What four runs support is that a
complete cache is not SUFFICIENT to prevent the storm and that run-to-run
variance dominates a 3-run comparison - not that the cache does nothing.
Next step is static: compare this capture's shape against the known-good one to
find why the 3D draws never reach CaptureShipDrawForRE.
The backlog has said a second capital-ship capture needs the 0x82307128 crash
dealt with first, because the run died at SELECT DATA before any mission
existed. That is no longer where it stops. With the Canary threading fix making
the menu dependable, tutorial_launch.sh drives boot -> title -> menu -> TUTORIAL
and the mission LOADS AND RENDERS: flight HUD, "Go to the box on your screen",
warship counters, controller diagram.
It then freezes. 13243 crash dumps, every one at PC 0x82307128, guest thread 9,
Access Violation read at 0x10000000C, preceded by exactly ONE
RtlRaiseException(E06D7363) right after a HostPathDevice::ResolvePath() with
empty arguments - the cache-flush shape. Two screenshots 6s apart are identical
(RMSE 0), no new dumps accumulate, and the process still burns 400% CPU.
So: reachable, renders, unusable for a capture. The blocker moved rather than
lifted, which is worth recording precisely because the entry's stated reason is
now wrong.
One new lead, deliberately not claimed as a cause: the resume-refused diagnostic
added with the threading fix fires 1671 times on this path and 1663 of them are
the SAME thread, F80001D8, with 152 before the first crash - against about 7 on
the menu path. Resuming a non-suspended thread legitimately returns false and
"Resume to kick a worker" would produce exactly this, so it is a lead, not a bug.
It is cheap to settle: check whether that thread makes kernel calls between
refusals.
Cheapest next test named: this page already shows a COMPLETE on-disc cache
produces no throw at all, and the cache is 40MB with .partial/.cold-rebuilt
leftovers beside it. One boot to warm, one to re-test.
The three orders the derived rule was built from all live in GP_TITLE.pak, so
they cannot confirm it - the rule was fitted to them. These two are from
GP_SAVE_LOAD.pak, read off the running game now that the Canary threading fix
makes the main menu dependable.
The 9-element slot-list header composites EXACTLY as the sort predicts, on all 6
instances of it, and nothing about this screen was fed into the rule:
measured 7 8 0 1 2 3 4 5 6
derived 7 8 0 1 2 3 4 5 6
including TWO tied groups (0xb102 x2 and 0xb210 x5) that both come out in
declaration order, and the unkeyed pfeff00.prm fade quad last.
The 13-element save/load frame differs in exactly the two open questions and no
new ones: two unkeyed pfbase.tbm backgrounds paint FIRST where the sort puts the
keyless last - the splash's palogo_eff0.prm behaviour in a different file type,
so implied_layer_key now covers it - and the 0xb100 group of four paints
10,11,8,12 where declaration order is 8,10,11,12.
That second point is a SECOND screen with a mis-ordered tie, which is what the
question needed, and it immediately kills a candidate: 10 and 11 are kind=0x2002
while 8 and 12 are 0x0000, so "descending kind then declaration index"
reproduces 10,11,8,12 exactly - and then fails both title groups, where every
element of 0x8083 is kind 0 and where 0x80a0 would predict 2,3,4,5,0,1,7 against
a measured 0,2,4,7,1,3,5. Seven candidates refuted now.
16 disc tests green.
resume_reliability.sh counts, per boot, whether the title's loader thread became
the CALLER of a kernel call. Counting boots where the press reached the title:
before the fix 1 of 5 ran the loader; after it, 5 of 5. Three of the post-fix
boots were driven far enough to classify the screen and all three reached the
MAIN MENU, each with the same shape - title at 216-252s, 40 kernel calls by the
loader, 6 ResolvePath reads. The failing boots before had zero of both, every
time.
Caveat kept in the doc: pre-fix runs were interleaved with compiles and a race is
load-sensitive, so the counts corroborate the mechanism rather than carry it.
Also fixes a self-inflicted confound. Two runs came back 'title_at_s=none' with
the emulator log ending in 'Killed', which I first read as the title detector
being too strict. It was not: an earlier copy of the script was still running
because 'pkill -f resume_reliability.sh' had matched the shell running it rather
than the script, and each of that copy's iterations kills the emulator BY NAME -
outside run-canary's lockfile. The harness now takes its own lockfile and refuses
a second copy, and the note records that pkill -f matches your own shell.
Two findings, the second only visible because of the first.
1. The harness has always had kernel logging switched off. log_mask DISABLES
categories (Kernel=1, Apu=2, Cpu=4, Gpu=8), so the long-standing --log_mask=13
meant Kernel+Cpu+Gpu off; kernel calls also log at Debug while log_level
defaults to Info. Seeing one needs BOTH LOG_MASK=12 and LOG_LEVEL=3, and no
boot log this project has taken ever contained a kernel call. boot_menu.sh now
takes LOG_MASK / LOG_LEVEL / EXTRA_FLAGS. A whole boot at Debug with Kernel on
is 23 MB, so the default was costing far more than it saved.
2. With that on, a captured failure shows the (A) handler doing everything right:
XamUserGetXUID(0, 7, ...)
NtCreateEvent(...)
ExCreateThread(..., entry=821748F0, ..., 00000001)
ExCreateThread Active: Thread Initially Suspended,
XThreadF80000CC (1F) Stack: 70880000-70900000
NtResumeThread(F80000CC, ...)
and the thread then never executing. Measured two independent ways: it makes
ZERO kernel calls - it appears 13 times in the log and every one is as an
ARGUMENT, never as the calling thread, while five other threads make 31905
calls after the resume - and its host thread has 00:00:00 CPU time while the
process sits at 546% and has burned 37 minutes of CPU in 6:46 wall.
A spinning thread burns CPU. This one has not run at all.
So the chain is: press delivered -> handler runs -> thread created suspended ->
resumed -> never scheduled. Input, the cache-flush crash and the game's own logic
are all excluded. A lost resume is a race, which is the first explanation that
fits the ~1-in-3 success rate.
Not settled: where the resume is lost, and no successful boot has been captured
with kernel logging to compare against.
"The title screen ignores (A)" is withdrawn. First-divergence across three boots
of the same binary says otherwise.
A slot-(1F) guest thread is spawned BY the press: exactly once per run,
immediately after the keydown, same stack base 70880000-70900000 in both runs
that got one, and never at all in the run that never accepted a press - which
rules out a periodic worker starting around the same time.
prm6, reached the menu: (A) at line 6498, (1F) at 6500, 6 ResolvePath after
opt2, stuck on the title: (A) at line 1287, (1F) at 1288, 0 ResolvePath after
opt, stalled before title: no (A) ever, no (1F) thread at all
In the successful run the loader immediately reads six paths out of the on-disc
cache and the menu appears. In the failed run the same thread starts and performs
no file I/O ever again. Total ResolvePath for the three boots is 90/84/78 - the
successful run's extra six are exactly the ones after the press, so the boots are
otherwise identical in I/O.
Refuted as the cause: the cache-flush std::out_of_range. All four of today's runs
have zero GUEST-THROW, zero CRASH DUMP and zero Access Violation, and the guest
stays alive throughout with its keystroke-poll counter climbing past 15000.
Next probe is neither input nor the crash: what the (1F) thread waits on.
The tie-break needs a fourth measured screen with a tied group, and OPTIONS is
three d-pad steps from the main menu, avoiding the NEW GAME hang. It was not
reached.
Advancing past the title is intermittent: 1 success in 3 attempts today with the
same binary, profile and procedure.
Attempt 1 stalled before the title existed. The guest was alive - RSS steady at
598MB and the keystroke poll counter climbing past 15000 - but the screen was
black and screen_children.py found ONLY the splash object resident. So that
failure is not a presentation problem: the game never constructed the title.
Being able to separate "stalled before building the screen" from "built but not
presenting" is new, and it is what the reader is for.
Attempt 2 reached the title at 265s and refused four presses - (A) at 0.25s,
0.25s and 0.5s, START at 0.3s - every one of them logged as DELIVERED to the
guest. Third independent confirmation that input delivery is fine and the game
simply does not act on the press. Waiting longer does not help either: presses
were spread from 10s to about 4 minutes after the title appeared, while the
earlier successful run's press landed within seconds.
Records the log as evidence and states the next probe: it has to be guest-side
now, on whatever consumes the keystroke, since the input path is excluded.
Read off the running game with screen_children.py and identified by pivot
signature as GP_TITLE.pak ratc-index 8, the NEW GAME / LOAD GAME / TUTORIAL /
OPTIONS / EXTRAS screen:
paint order: 1 3 4 2 5 8 9 6 7 15 10 11 12 13 14 0
It is the first measured screen carrying TWO primitives, and they land in
different places, which is the point. pteff02.prm (the 25% dim) paints 4th,
beneath the whole UI; pteff00.prm (the transition fade, resting transparent)
paints last. Both match their positions on the title screen exactly. So a
primitive's place is per-element and stable by role - backdrop first, dim at
slot 4, fade last - and there are now three permutations to test a derivation
against rather than two.
Wired into measured_paint_order, keyed by element names so both language builds
get it. The English build composited with --primitives edge-correlates at 0.9591
at shift (0,0) against a framebuffer capture taken in the same session - a third
screen confirming paint order, resting pose, fade alpha and primitives at once,
against a capture this project had not seen before.
13 disc tests green.
Chasing why (A) does not advance the title turned up four harness bugs, one real
root cause, and a refutation of that root cause as the explanation.
FIXED, each verified:
* boot_menu.sh sent the emulator stdout to /dev/null, which is why none of the
rest was visible. It now keeps a log and prints its path.
* skip_intro.sh probed pixel (625,618) for the green (A) glyph - a 1280x720
coordinate. screenshot returns the 1279x675 game surface, where that point
is on the copyright line and reads (8,17,31). Symptom: a 600s TIMEOUT with
the title on screen. Now classified with screen_id.py; next boot printed
"TITLE at 239s -> A".
* skip_intro.sh no longer taps through the movies. Making that press real (the
vgamepad fix) was a REGRESSION: the boot then reached the title in 90s and
that title accepted nothing. menu_draw_capture.sh records the same finding
independently.
* boot_menu.sh signs in whichever profile exists instead of a hard-coded XUID.
ROOT CAUSE FOUND: naming a XUID with no profile behind it opens a sign-in
dialog, xam_dialogs_shown_ goes to 1, and IsUIActive() then discards every
XamInputGetKeystrokeEx. Measured 8,388,601 swallowed calls in one boot with the
pad log showing presses arriving normally throughout. Only B13EBABEBABEBABE
exists on disc; the script asked for E0300000EFBEA3D4. Signing in the real
profile takes the swallow count 8,388,601 -> 0.
AND REFUTED: that is not why the title is stuck. With a valid profile and zero
swallowed keystrokes, a single (A) on the title that ends the boot still does
nothing. The dialog bug was real and worth fixing; it is not the explanation.
Next probe is specific: --log_mask=13 records no kernel calls, so it is not even
known whether the game polls at the title. A log on the SUCCESSFUL
XamInputGetKeystrokeEx return, mirroring the one already on the swallow path,
answers it in one boot.
Trying to read a third paint order off the running game turned up two bugs in
the capture harness, both of which fail in ways that look like the game
misbehaving rather than the script being wrong.
1. `--audio` is not a cvar in this tree, and eight boot scripts passed it.
Xenia calls ShowSimpleMessageBox from ParseLaunchArguments, BEFORE logging is
initialised, so the symptom is a 10x10 window, no log, no guest memory and a
dialog that blocks on XIfEvent forever - i.e. a hang deep in the emulator.
run-canary`s own header documents this exact trap; the scripts predate it.
Removed from all eight.
2. `vgamepad` no longer exists - the uinput pad was replaced by the --hid=file
driver and pad.py - but skip_intro.sh still called it. The script runs
without `set -e`, so the call failed silently and the title branch pressed
nothing while still exiting 0. A caller was told "TITLE -> A" with the game
sitting on the title screen. It now presses through pad.py and exits 6 if
that fails.
The first bug is fixed and verified: the boot now reaches the title screen with
PRESS (A) BUTTON. The second is fixed but does NOT unblock the title - see the
next commit.
fill_quad composites an untextured primitive as a solid rectangle of the
keyframes fade colour, pivot x 2 in size, placed and scaled exactly as a sprite
is. Behind ComposeOptions::include_primitives and screen render --primitives.
On the title screen, whose paint order is ground truth, it is measurably right:
mean luminance 76.30 -> 63.72 against the captures 64.58, i.e. from +18% to
-1.3%, and mean absolute difference 16.07 -> 13.08. The background was ~40% too
bright; pteff02.prm, a 25% black dim, was what was missing. The wordmark is not
dimmed by it because the measured order paints that quad at slot 4, beneath the
logo. Edge correlation moves 0.9538 -> 0.9480, which is not informative here: a
uniform dim scales gradients uniformly so a normalised edge score barely sees it.
OFF BY DEFAULT, and that is the finding. A primitive has no T8aD header, so no
layer key, and derived_paint_order sorts the keyless to the end. GP_DIALOGs
pzeff00.prm is a single keyframe of opaque black at full screen; painted last it
wipes the build. Of the 125 builds that draw a visible primitive, 36 come out
>99% one colour with the derived order.
No constant default works, because the two screens read off the running game
disagree: the splash paints its primitive FIRST (the black backdrop) while the
title paints one at slot 4 and another LAST (the fade-out). Declaration order
fails the title too. A disc test measures the damage rather than asserting the
feature works, so the number moves when the ordering is solved.
Also records a false alarm worth keeping: a first pass reported 36 GP_DIALOG
builds at "100% black", which was a crude near-black pixel threshold and not a
black screen - those dialogs are dimmed 50% and perfectly legible. The genuinely
wiped builds are a different set.
blit modulated by tint only, which is 0xffffffff on essentially every keyframe,
so the fade word was decoded, stored and then discarded. Applying it as an ARGB
modulate takes the title composite's edge correlation against the framebuffer
capture of the running game from 0.4597 to 0.9538, both at zero shift. The white
wordmark with its blue outline, the trademark, the copyright and the orange
exploding planet all appear -- the planet because a full-screen blue effect that
rests at alpha 0 had been painting over it at full opacity.
ARGB is measured: across a fade-in the high byte walks 0x00 -> 0x80 -> 0xc0 ->
0xe0 -> 0xff while the low three stay ffffff, and the low 24 bits are 0xffffff on
5276 of the disc's 5453 resting keyframes.
A modulate can only remove pixels, so the risk is a blank screen. Measured: no-op
on 4060 of 5200 sprite elements, partial on 453, hides 687 -- transient HUD
indicators that should not be lit at rest -- and NO build is left with nothing
visible. A disc test asserts that, and that the no-op share stays high, which
also guards the resting rule against drifting onto ramp frames.
Both changes are in one commit because the second is invisible without the first.
Applying fade erased the word PAUSE, which the running-game capture plainly
shows: pgptitle.rat has three runs of two identical keyframes -- pre-roll, hold,
exit -- and the 'later run wins' tie-break grabbed the exit. A group carries the
screen's entry animation AND its exit, so a run ending on the last keyframe is
now excluded unless it is the only one. The title correlation is unchanged.
Element::rest() picked the keyframe with the largest gap to the next keyframe's
time. That reads a keyframe as a value held until the next one; it is the start
of a ramp toward it. A long gap after keyframe k means the screen spends that
time arriving at k+1, so the settled pose is at the far end of the gap.
The title wordmark zooms in over five frames and holds at (184,193) at 100% from
t=251 to t=264. The old rule picked the frame before the long gap: (179,186) at
101%, still mid-zoom.
Measured against the framebuffer capture of the running title screen, which is a
1:1 crop so frame coordinates map directly (confirmed: the copyright line lands
on row 669 in the capture and in both composites). Edge-correlated over the
wordmark box:
plateau (landed) best 0.4597 at shift (0,0)
longest dwell (old) best 0.1511 at shift (+3,+8), 0.1268 at (0,0)
The old composite scores 3x lower and only peaks after being moved, by about the
(-5,-7) that picking kf4 instead of kf5 predicts.
It also fixes six title elements the old rule rested at alpha 0x00 where the
capture plainly shows them, and pteff00.prm - the full-screen fade quad painted
last - which rested at opaque black. That was the blocker on .prm compositing.
Adds tools/re-capture/align_to_capture.py, which is how this was scored, and
turns the .prm test that deliberately asserted the old defect into a guard on
the fix.
Not settled and now the next item: compose ignores the keyframe fade alpha
entirely (blit modulates by tint only), which is why choosing the wrong keyframe
was invisible until now.
The developer-logo splash declares its sprites directly and has no .rat layout
child, so is_build rejected it and no screen command could render it — despite
it being one of only two screens whose paint order has been read off the running
game, and the one where the layer key explains the whole permutation.
Adds ui_layout::is_composable (a declaration table plus at least one element
resolving to a T8aD the bundle carries) and an opt-in --all on screen
list/info/render. Measured on the disc: 2859 RATC bundles, 965 pass is_build,
2751 pass is_composable, and 0 pass is_build without passing it — a strict
superset. It is opt-in because the 1786 extra bundles are mostly two-element
fragments (a button and its glow), and because widening the default would
renumber --build for every pak, invalidating the build indices the corpus's
notes cite by number.
The splash now renders 6/7 elements, painting its glows first in the order
measured off the game; a disc test pins that order.
`compose` skips focused-state records by default, so whatever that flag matches
vanishes from every composite. It matched a trailing `f` in the name and nothing
else, which is not the convention — it is a letter.
Measured across the disc: 2458 elements match the suffix and only 54 of them
have the base element they would be the focused version of; all 54 are
`pgmenu_btnNNf.t32`. The other 2404, spread over 864 bundles, are `_eff` glow
layers whose names end in the same letter — `pb_name_eff.t32` alone accounts for
1122 of them, and `palogo_gamearts_eff.t32` is one the draw capture shows the
game painting, before its logo, with its own layer key.
Requiring the pair recovers 587 glows in the composable builds. GP_OPTIONS is
the plainest case: without `pbmwindow_eff.t32` the panel had no window at all,
just two floating brackets (captures/ui-layout/options-with{out,}-its-glow-layer.png).
Two other candidate rules were tried and refuted first. The `opt` link is not a
focus link: 221 elements are opt-targets, only 2 of them suffix-match, and the
targets include `pjnet_bg.rat` and `pv_loading_loop1.rat`. And the suffix alone,
as shown above, is unrelated to anything.
compose now sorts elements by the word at +0x08 of their sprite's T8aD header
instead of painting in declaration order, for every build except the two whose
measured order is hard-coded. That word is non-decreasing in the order the game
actually paints both measured screens, so every screen nobody has captured now
gets its layering from the file rather than from the declaration table, which is
provably not the paint order.
Verified with artifacts and both ways, not by a green build: the disc test
asserts the measured orders never invert the key and that the composite's key
sequence is sorted, and reading the word from +0x0c instead makes it fail; the
title composites identically; and GP_MISSION_SELECT — uncaptured — now composites
cleanly, committed as a capture.
Two things recorded rather than smoothed over: ties keep declaration order
because the game breaks them some other way that is not known, and the
developer-logo splash has no .rat child, so is_build rejects it and the
compositor never sees that bundle at all — its measured order is inert in
practice and screen render cannot draw it.
Driving menu -> NEW GAME -> DIFFICULTY -> SELECT DATA -> slot 01 with plain flags
gets further than any run so far: SELECT DATA is reached with ZERO crashes (the
screen is alive — a log_ui_draws probe there records 140 draws over 8 frames),
and then choosing a slot lets the game proceed into a cinematic or load, where it
crashes at 0x82307128 — the same cache-flush std::map erase.
So the crash is intermittent in WHERE it fires, not whether: boot, SELECT DATA,
and now after slot selection. There is no safe path through the menus to be found
by choosing different options.
And it is the blocker for every mission-side experiment — the second capital-ship
capture included. Navigation is not the obstacle any more; it is scripted and
works.
Not settled and said so: how to get past it. --mem_watch=false does not (twice).
--eh_dispatch is still untested because no run with it on has reached a throw.
The black-screen hang is a separate intermittent failure with no diagnosis. A fix
is emulator guest-race work, not RE.
The run with --eh_dispatch=true produced zero crashes and zero throws, which is
not the result it looks like: the crash path was never reached, so the flag is
UNTESTED. Recording that rather than banking a false pass.
What the run did establish, with screenshots: TUTORIAL leads to a lesson list
(a fifth screen nobody had captured, committed), and selecting BASIC CONTROLS
puts the guest on a permanent black screen — no crash, no GUEST-THROW, emulator
healthy. That gives the black screen a trigger it did not have before: it follows
a CONTENT LOAD, which also fits the earlier black screens.
So the two blockers on the way to a mission are distinct and both unbeaten: the
SELECT DATA crash when the path goes through save-slot enumeration, and the
black-screen hang on loading content. The eh_dispatch test needs a run that
actually reaches SELECT DATA.
Driving toward a mission for the second capital-ship capture works as far as two
screens nobody had captured — DIFFICULTY, then SELECT DATA — and then the guest
dies at PC 0x82307128, the SAME std::map/set erase as the boot-time throw, with
537 stacked dumps. Both screenshots are committed.
So the ship item's blocker is the crash, not navigation: the game reaches the
save-slot screen and dies enumerating save data. mem_watch stays eliminated —
this run had it off. And the save/cache path is the common factor across both
firings.
Stated as unsettled: whether a warm cache prevents this firing the way it
prevents the boot-time one. The cache WAS warm here, so it looks like no, but
that is a single run and the cold/warm A/B was only ever run against the
boot-time throw.
The compositor painted in declaration order, which the draw capture proved wrong
— the title's background is declared ninth and paints first. The order the game
uses is its runtime child list, and no decoded field reproduces it, so rather
than leave the screen composited wrongly this lands the orders that HAVE been
read off the running game and falls back to declaration order everywhere else.
Two builds are covered: GP_TITLE's title build and the GAME ARTS / SETA / studio
anima splash. Keyed by element names, which identify a build across paks and
language variants.
Rendering it exposed a second defect, and the same capture settles it: the
kind = 0x4 elements are motion-trail ghosts, not resting content. The bundle
declares three instances of each wordmark; the capture shows exactly ONE quad at
each wordmark's position. Drawing them at their resting keyframe put three
oversized PROJECT SYLPHEED copies across the composite. They are now skipped.
Verified with an artifact, not a green build: the composite is committed
(captures/title-composited-measured-order.png) and now reads as the title screen
— background, planet, ship, wordmark, TM, copyright, correctly layered.
The test is disc-gated and was checked BOTH ways: it passes as landed, and
disabling the order table makes it fail. It reads one pak rather than every
build on the disc — the first version used the all-builds helper and got the
test process OOM-killed running alongside the other three.
The plan was to separate ptlogo_back2eff from ptlogo_back2eff5 (same 1133x280,
declaration 20 vs 18, either side of ptlogo_back2 at 19) by their resting fade
alphas. Carried out, and refuted: both quads come back at alpha FF, and reading
the bundle again, both elements REST at 255 under this project's own max-dwell
rule — back2eff5's longest hold is t=74 at 255, and the 192 I had quoted is a
later, shorter keyframe, not its resting value. The ambiguity stands.
What the colour did buy is worth more than the tie-break: the first check of the
fade/keyframe decode against the RUNNING GAME rather than against another parse.
Every static element draws at exactly the resting alpha the bundle predicts, and
the only two quads whose alpha moves between consecutive frames (88->88/86->87
and 3C->38) are the rotating effect pair and the PRESS (A) glow — the two things
visibly animating on screen. Nothing had confirmed before that the alpha channel
of a keyframe is what drives that throb.
Two results, one of which closes the navigation problem the last three
iterations kept hitting.
**The title states.** The hypothesis was that the attract-loop title is a
non-interactive presentation that omits the PRESS (A) plate. Half right:
* the state distinction is REAL — a single (A) on the title that ends the boot
opens the main menu, 2 of 2 in independent runs, one of which never pressed
F10; the title the attract loop returns to accepts nothing, not (A), START, B,
BACK, X or Y, across dozens of delivered presses;
* the proposed tell is REFUTED — capturing the draws in both states in one run
gives 13 quads at identical rects, ptbtn00 and ptbtn00f included. The two are
identical to the renderer and different only to the guest.
So there is now a reliable route to the menu: first title after boot, one tap.
**The main menu's paint order**, captured with it. Its sprites are GP_TITLE
build 5's, and ptframe1/ptframe2/ptbtn01f land within 4 px of their declared
resting placements — an independent placement check on an untouched bundle.
It does NOT settle the ordering question, and the entry says so: build 5 lists
its background at indices 1-2, so declaration order and "background first"
predict the same sequence here. Same failure mode as GP_READY_ROOM/GP_OPTIONS.
What it does establish is that the title's disagreement is not a decode
artefact — same pak, same engine, one build that follows its table and one that
does not.
The previous entry named the next step: "tap (A) once per second and see whether
the success rate goes to 1". It was run. The answer is no.
40 presses at 1/s on the title change nothing, and neither does one each of
START, B, BACK, X and Y. Every press was delivered (the driver logs down/up for
each) and the new [RE-INPUT] diagnostic never fired, so nothing was swallowed —
the guest received them and ignored them.
Also recorded, because it destroys a run rather than merely wasting it: tapping
(A) through the boot (88 presses over the intro) ends on a permanent black
screen with no crash and no throw.
What is left is a difference in STATE, not in input: the one success came on a
title that appeared ~83 s into a warm boot, the failures on titles that appeared
after a full attract cycle. "The attract-loop title is a non-interactive
presentation" is written down as a hypothesis with the experiment that would
settle it — a log_ui_draws capture in each state, looking for ptbtn00.
The previous entry called the title's Ⓐ a hard blocker. It is not: the main menu
is reached and screenshotted (NEW GAME / LOAD GAME / TUTORIAL / OPTIONS /
EXTRAS). What is true is narrower — Ⓐ advances the title only intermittently,
about one attempt in four, with the press verifiably delivered every time and no
Xenia UI active.
Three candidate causes were eliminated with measurements rather than argument:
* IsUIActive is now observable (Canary logs when it swallows a keystroke) and it
never fires on the failing runs;
* the driver filter is fine — the game polls with flags=3 and the file pad
reports Controller=1, so FilterDrivers keeps it;
* the game makes no content/user/signin call on the press at all — tracing every
Xam call around it shows only input polling.
And two traps in my own measuring rig, which cost more than the bug and are
written down so nobody repeats them: a FIFO trace consumer that exits STALLS the
emulator (the guest stops polling — indistinguishable from a dead pad, and it
produced two runs of false evidence), and phase-A's kernel.return events carry a
placeholder return_value of literally 0, so "every keystroke call returns
SUCCESS" was an artifact of the logger, not a finding.
Chasing the title-screen crash into the emulator's own diagnostics turned it
from a mystery into a controlled experiment, and knocked over two things this
corpus said yesterday.
Withdrawn #1: "the fault address 0x1_0000000C is a pointer with a stale high
word". The crash dump prints r25 = 0x0000000C, clean. Xenia maps the guest's
4 GiB at host 0x1_00000000, so that IS guest address 12. The guest dereferenced
the small integer 12.
Withdrawn #2: "with --mem_watch=false the crash does not happen at all", which
named the crash-oracle handoff's suspect #1 as measured. It was confounded —
every --mem_watch=false run had also had a warm cache. Held cold, the throw
happens with the probe off (2 437 crash dumps). mem_watch is eliminated for this
crash.
What it actually is: the access violation is the guest's own `throw` RETURNING,
because this build logs guest C++ exceptions and continues rather than
unwinding. So the event is the throw, and with --cache_throw_diag=true the guest
names it: std::out_of_range, from the cache-manager flush, with a deque of 38
entries (37 distinct, one duplicated) against a 37-key map, every one of them
absent from the flush's snapshot but present in the live map — the TOCTOU race
the logger's own message describes.
And the new, useful part: the trigger is the on-disc cache. Complete cache, no
throw (2 runs). Directory moved aside or half-rebuilt, throw ~100 s into the boot
(3 runs, including one that threw with NO access violation behind it — which is
why crash dialogs are the wrong thing to count). A suspect in that bisection plan
now costs a `mv` and two minutes instead of a mission.
Each of these presents as "the pad is dead", and each has a different cause.
1. **F10 opens the emulator's menu bar.** It is the RE capture hotkey AND the
toolkit's menu key. With that menu open — or any Xenia UI window, the
Profiles Menu included — `IsUIActive()` is true, so XamInputGetKeystrokeEx
returns SUCCESS with a ZEROED keystroke before the pad driver is asked. The
guest polls, gets nothing, and does nothing, with no error anywhere. Escape
does not close it; a click on the game surface does. This cost most of an
iteration.
2. **The file-pad was never the problem.** It delivers (vk=5800 down/up per tap)
and A skips movies in the same runs.
3. **(A) at the title needs a signed-in profile.** Without one the guest calls
XamShowSigninUI and Xenia's dialog appears — which is also the proof the
guest reads the button. That dialog cannot be completed here: the gamertag is
an ImGui text field and synthetic X key events never reach it. Hence Canary's
new --create_profile_if_none.
And the blocker, stated as measured rather than as a theory: with the profile
signed in, (A) still does not advance the title across four boots. The
reproducible failure is next door — with the default --mem_watch=true the guest
crashes in the boot content path (read of 0x10000000C at 0x82307128, thread 9,
after a guest C++ throw), and with --mem_watch=false it does not. That is a
second, far cheaper reproduction of the Ready-Room crash the canary handoff
blames on the mem_watch probe: 40 s from a cold boot instead of after a mission.
One observation kept because it did not reproduce: a single (A) once crashed the
guest at a DIFFERENT PC (0x824578A0, thread 6). Two attempts to reproduce it
gave neither a crash nor a transition.
Next step named: those two PCs in xenia-rs/sylpheed.db, and the content exports
around the press.
Three findings and two corrections, all against the same capture.
Corrections first, because one of them invalidates numbers already written down:
* **the running screen is build 4, not build 7.** `screen info` defaults to the
largest build; the game runs a different one, and the two disagree on sprite
sizes (ptlogo1 822x100 vs 919x113 — the capture says 915x115). Every
declaration index in the previous entry was against the wrong table. The
conclusions survive unchanged; the indices are restated.
* **the ship capture does NOT skip these UI draws.** This entry justified a new
hook partly on "it requires an f32x3 position stream, which a 2D quad does not
have". These quads have one: armed on the title, xenia_ship_capture_01.log
holds 1150 records of which 965 are the UI sprite shader. The new hook is
still the right tool — frame brackets, submission order, texture identity —
but it was justified with a wrong reason.
Findings:
* **no depth in the geometry.** Attribute 0 is k_32_32_32_FLOAT, so every quad
carries a Z, and every Z is 0.00000. Submission order is the whole ordering.
* **no ordering field in the bundle.** Every word of build 4's declaration table
dumped (committed as evidence): the unknowns are constant. The placement
region's per-group lead word — never read before — is 0 for all 24 groups, and
the region is followed straight by the RATC child stream, so no table hides
behind it.
* **the batching rule**, which is what makes the order readable: a draw holds
one or two quads, and a two-quad draw always holds two elements adjacent in
paint order that share a texture page. The engine flushes when the page
changes; it does not sort by page (pages alternate).
Reproduced in an independent run — same order, same rects — which is the second
observation the CONFIRMED bar asks for.
BACKLOG's UI-ordering item ended at "the next step is no longer static — it is a
per-draw capture of the title screen showing the order the game submits". That
capture now exists.
The order, in submission order: a full-screen background layer, a rotated effect
pair, a second full-screen layer, ptlogo_back2eff + ptlogo_back2, ptlogo1 +
ptlogo_tm, ptlogo2, ptcopyright, and the PRESS (A) BUTTON plate — declaration
indices 13, 22|24, 23, 0, 11, 1, 28, and then two elements that are not in that
build at all.
Two more candidate orderings die on it (keyframe start time, resting-keyframe
time), and one structural fact reframes the item: the visible screen composites
TWO bundles — build 7 plus the one-element build 2 that is the button — so no
single build's element table can be the paint order whatever its order. The
button's quad lands at (384,551) against a declared rest of (383,550), which is
a one-pixel agreement between the static placement decode and the running game
on a bundle nothing had checked.
INDEX's "the screen's draw list is the bundle's declaration table (back-to-front)"
is demoted in place rather than edited away.
Still open and said so: the rule that produces the order; three of twelve quads
unidentified; one screen only.
`BACKLOG.md`'s "the declaration table is not a paint order on every screen" had
been reasoned about but never measured. It is now measured, and the entry says
so both ways.
Confirmed: a framebuffer capture of Canary on the title screen shows the
`PROJECT SYLPHEED` wordmarks over the full-screen background, so declaration
order is not the paint order there.
Refuted, and recorded rather than quietly dropped:
* the `0x10`-adjacency first step this entry proposed. The background *is* next
to a `kind = 0x10` `.prm` on both screens that have one — but on opposite
sides (`GP_TITLE` puts the background after it, `GP_MISSION_SELECT` before),
so no rule keyed on the `.prm` orders both. `GP_READY_ROOM` and `GP_OPTIONS`
cannot serve as the third and fourth witnesses: neither carries a `.prm` or a
full-screen background at all.
* the placement-region group order and the RATC child order, as above.
* reverse declaration order, by the same capture — it would draw the background
over the copyright line, which is visible.
And separated out: part of what the bad render showed was not ordering at all
but the pivot/scale defect fixed two commits back. `ui-rat-layout.md` gains that
rule, the correlation evidence, the unmeasured pivot-vs-centre gap, and the
disc-wide demotion of "pivot is exactly half the texture" (49 % agree, 37 % are
off by more than 16 px — `ptcopyright` is 694 px wide in the framebuffer and
`pivot*2` says 618).
Captures: `title-screen-oracle.png` (the game surface cropped out of the
emulator window at (1,45), 1:1, bottom 45 rows clipped by the display) and
`title-screen-composite-2026-08-18.png` beside it.
To separate "a 1 s burst never reaches the steady rate" from "a per-axis
multiplier", measure inside ONE hold: successive 0.25 s windows of a single 3 s
press, holding speed, attitude and starting conditions constant by construction.
rep0 rate 16 59 325 209 130 322 238 110 310 151 183
rep1 rate 52 181 231 246 236 169 368 195 181 255 182
Not usable. At 0.25 s the windows do not contain enough guest updates to average,
so rate and speed both swing 3x window to window -- the same aliasing that once
manufactured a rate-vs-speed curve, reappearing at finer resolution. The first
window is lowest in BOTH repeats, which is what a ramp would look like, but the
sequence never plateaus, so the signal cannot be separated from the sampling. No
claim either way.
Widening the window does not rescue it: 0.5 s averages well enough, but a hold
long enough to contain several 0.5 s windows bleeds speed -- and speed is the
variable under test. The two effects are entangled at this observation rate.
So the residual needs a different INSTRUMENT, not another script. Live-RAM polling
samples an unsynchronised snapshot; the question wants the craft's angular
velocity as the guest computes it, once per frame. That is a Canary-side hook --
the same shape as the existing F10 ship-capture patch -- and the rebuild toolchain
already makes it cheap. Recorded as the recommendation rather than attempted as a
seventh variation of the same measurement.
Burst design repeated with the HUD clock bracketed (01:01.86 -> 02:10.61, ~x1.26)
and roll measured in the same flight.
pitch 87.0 @ 85 82.8 @ 308 47.0 @ 1077 min:max 1.85
roll 125.0 @ 76 119.0 @ 291 82.6 @ 1023 min:max 1.51
SHAPE CONFIRMED on both axes: the rate interpolates between _Min (at minimum
speed) and _Max (at maximum speed), matching to 1.6% for pitch (vs PitchMinus
75/40 = 1.88) and 5.6% for roll (vs 200/125 = 1.60). Both ratios are
clock-independent so they stand regardless of the conversion, and pitch's
re-confirms ly+ = pitch-MINUS (reproducing 1.82 from the previous run).
ABSOLUTE SCALE DOES NOT MATCH, and not in the same direction:
pitch measured/predicted = 1.15, 1.21, 1.07 consistently OVER
roll = 0.62, 0.64, 0.60 consistently UNDER, very flat
A clock error cannot explain this -- it would move both axes together and these
go opposite -- so the discrepancy is per-axis. Candidates, neither measured: a 1 s
burst not completing the angular-acceleration ramp (would under-read; fits roll's
flat 0.62, not pitch's excess), or an unidentified per-axis multiplier. Left as an
open question with the separating test named: 1 s versus 3 s bursts at the same
throttle, where the ramp hypothesis predicts the longer burst reads higher.
Also noted: the roll run correctly REFUSED on a WEAK row pin after the pitch
bursts left the craft tumbled -- and roll is immune to that labelling, which the
guard's own message says, so ALLOW_WEAK_PIN=1 is its documented exception. A guard
that states its own exception is worth having.
The design the sweep could not provide: settle the throttle, measure the settled
speed, pitch for ONE second so speed barely moves inside the burst. Three
throttles, two repeats, row pin CONFIDENT, fresh flight.
LT min burst speed ~105 rate 113.6, 109.5 deg/wall-s
cruise ~383 100.2, 88.4
RT max ~1483 52.2, 70.5
Rate falls monotonically with speed -- 111.5 -> 94.3 -> 61.4 -- at three KNOWN,
SETTLED speeds instead of smeared across a bleeding one.
The decisive comparison needs no clock. Absolute rates depend on the run's clock
ratio, but the min:max RATIO cancels it:
measured min:max = 1.82
AV_PitchMinus_Min/Max 75/40 = 1.88 -> 3.0% apart
AV_PitchPlus_Min/Max 150/70 = 2.14 -> 15.1% apart
Two conclusions, neither resting on a clock measurement:
- _Min/_Max really do mean "at minimum / at maximum speed", with the rate
interpolating between them: shape confirmed to 3%.
- ly+ drives pitch-MINUS, not plus. The craft has asymmetric pitch authority
(75/40 down vs 150/70 up) and the ratio picks the pair cleanly.
Absolute magnitudes remain open: this run did not bracket the HUD clock, so
deg/GAME-second cannot be computed from it, and picking a ratio that makes the
numbers fit would be circular. The probe now screenshots the clock at both ends.
Also: fly_stage.sh now waits for the TAKE-OFF load too. Guarding only the stage
load left a run pressing A into a black screen and then reporting "player entity
not found" from a game that never reached flight.
Fresh flight, row pinning CONFIDENT (margin 0.413), one sweep and nothing before
it. axis_probe now REFUSES to measure on a WEAK pin (ALLOW_WEAK_PIN=1 overrides)
since it is a precondition, not a warning: roll is immune to the up/right
labelling but pitch and yaw are not.
Clock x1.26. Binned by speed, both in game units, against the linear
interpolation of AV_PitchPlus_Min 150 (at MinimumVelocity 100) to _Max 70 (at
MaximumVelocity 1200):
speed ~435 measured 100.8 predicted 125.6
speed ~572 113.8 115.7
speed ~709 126.3 105.7
speed ~846 83.1 95.7
speed ~983 72.7 85.8
Supported: the magnitudes (73-126 measured vs 86-126 predicted) and a falling
high-speed end. NOT supported: the interpolation law. Scatter is +-25%, the two
fastest bins hold 1 and 2 windows (the first moments before the speed bled), and
the slowest bin misses in the wrong direction.
The flaw is structural, not statistical: a sweep DRIVEN by the speed bleeding
cannot dwell at either extreme, which is exactly where the law is most testable.
What would settle it: hold a settled throttle and pitch for ~1 SECOND, so speed
barely moves inside the burst and each burst gives one honest (speed, rate) point;
repeat at LT / neutral / RT for three clean points at known speeds. Recorded as
the next design rather than attempted as a fifth variation of the same sweep.
Fitting rate against instantaneous speed produced a tidy "rate rises with speed"
relationship, with speeds up to 4795 when the craft's maximum is 1200. It is
entirely an artefact: 20 Hz polling is faster than the guest updates these fields,
so a per-read delta is either exactly zero (no update yet) or a whole frame's
worth divided by a fraction of a frame. 111 of 352 reads were zero on BOTH
channels -- position and attitude update on the same frame, so the two are
perfectly correlated, and dividing each by the short wall dt produced the
correlation out of nothing.
Fix: aggregate over windows spanning many frames (0.5 s). A sum of |delta| over
such a window is right however the updates fall inside it.
This does NOT affect the swept-total probes (roll_axis.py, rate_probe.py) -- they
already summed over the whole dwell, immune for the same reason. Only per-sample
instantaneous rates were ever wrong, so no earlier number moves.
The windowed re-run is NOT yet claimed as a result. It gives plausible magnitudes
but still shows rate rising with speed, against the definition's PitchPlus_Min 150
> _Max 70, and it has two disqualifiers: it ran on an instance where the craft was
already tumbling from the previous sweep, so pinning reported "WEAK -- craft may
not be level", and the sweep started mid-range rather than at maximum. A clean
answer needs a fresh flight with pinning CONFIDENT and nothing before it. Since
what is in doubt is precisely what _Min/_Max mean, a measurement through a
doubtful instrument cannot settle it.
Both datasets kept, the bad one labelled, because the aliased curve is a good
example of what a manufactured correlation looks like.
Measured pitch with the rows properly pinned, against this craft's own disc caps
(AV_PitchPlus_Min 150, AV_PitchPlus_Max 70):
min speed (LT) 1391.0 deg / 8.00 s, clock x1.326 -> 131.1 deg/game-s vs 150
max speed (RT) 989.0 deg / 8.05 s, clock x1.318 -> 93.2 deg/game-s vs 70
A rate 33% ABOVE a cap is not a finding, it is a broken instrument. The HUD speed
is in the same bracketing screenshots that give the clock, so read it:
slow phase 102 -> 18
fast phase 1193 -> 589
The speed is NOT constant during the dwell -- pitching halves it in 8 seconds.
The cap is speed-dependent, so as the craft slowed its cap rose, and an 8-second
average necessarily lands between the max-speed cap and a mid-speed one. The 133%
is entirely the instrument.
This also weakens the roll result committed earlier: same method, so 120.9 vs
AV_Roll_Max 125 is CONSISTENT but is not a tight test -- the true cap could be
lower and still produce that average. Said plainly in the doc rather than left
standing as a clean confirmation. Min-speed figures are less affected; there is
little speed left to lose.
Proper fix, not yet done: dwell ~1-2 s so speed barely moves, or sample HUD speed
continuously and fit rate against INSTANTANEOUS speed -- which yields the whole
rate-vs-speed curve instead of two points.
Separately this is a flight-model finding: TURNING COSTS SPEED, steeply, with the
throttle still at maximum. A reimplementation treating the throttle as a speed the
craft simply holds will be wrong during manoeuvres.
The probe now pins which non-forward row is up and which is right, instead of
taking the D3D convention on faith:
row world-Y means: [0.469, 0.883, -0.000] forward = row 2
-> up = row 1, right = row 0 CONFIDENT
That is the OPPOSITE of the assumption the previous run used, so that run's yaw
and pitch columns were swapped -- under the correct labels its ly+ reading of
154.1 deg/wall-s is PITCH, which is what a left-stick Y should do.
Measured with the unknown inputs FIRST, each passing a liveness check:
rx 0.0 0.0 0.0 ry 0.0 0.0 0.0
LB 0.0 0.0 0.0 RB 0.0 0.0 0.0
lx roll 209.8 ly pitch 154.1
These zeros are trustworthy where the previous run's were not: the craft was
verified alive between inputs, and the probe aborted the moment it stopped moving
rather than reporting the clean zeros a destroyed craft produces (it did abort,
after lx+, which is why lx/ly are carried from the earlier run rather than
re-measured).
So NO PAD INPUT YAWS THE CRAFT. AV_Yaw_* (45/25) exists in the definitions but
nothing on the right stick or the shoulders drives it, which upgrades the old
"yaw: no input found" from a failure to find one into a measurement that the
remaining candidates do nothing. The natural reading is that yaw is a consequence
of banking rather than a commanded axis.
Not covered, and not claimed: the d-pad (tactical map) and the face buttons
(fire/weapon select). Neither is a plausible flight axis; neither was measured.
New probe (axis_probe.py) decomposes every held input into all THREE rotation
components at once, instead of measuring one axis at a time through a non-forward
matrix row -- the flaw that once made roll and pitch produce identical numbers.
For previous rows (f,u,w): roll = atan2(u.w_old, u.u_old), and forward's rotation
toward each of the other two rows gives the remaining pair.
Stage 02, file pad, full deflection on exactly one channel at a time:
lx+ roll 209.8 b 0.9 c 10.1 deg/wall-s
ly+ roll 0.0 b 154.1 c 0.0
rx+ roll 0.0 b 0.0 c 0.0
ry+ roll 161.1 b 87.0 c 37.1
LB/RB all zero
What this supports: lx = ROLL, cleanly (~0 on both other channels), agreeing with
the independent roll measurement. ly drives ONE axis, cleanly.
What it does NOT support, and I am not claiming:
- WHICH axis ly drives. entities2 measures row 2 = forward against velocity, but
rows 0 and 1 are labelled up/right by the D3D convention rather than by
evidence, and yaw/pitch SWAP if that is wrong. Roll is immune (rotation of
either non-forward row in their shared plane is roll either way).
- anything about rx/ry/LB/RB. The run ended on GAME OVER: full-deflection spin in
a live combat mission gets the craft destroyed, and the only symptom is "0
player candidates" AFTERWARDS, so late rows may be post-death. rx+ reading all
zeros and ry+ reading mixed are exactly what a dying craft would produce.
So "yaw: no input found" is NOT resolved. Both gaps are now written into the
probe's header with what would fix them: a liveness check between inputs, and
pinning up-vs-right against world Y.
Measured about the FORWARD axis (roll_axis.py), which is the fix the withdrawal
specified: express the new up-vector in the old (up, right) basis and take
atan2(u.w_old, u.u_old), so the component along forward -- what pitch produces --
is dropped by construction. The old probe watched a non-forward matrix row, which
sees any rotation that moves it, and that is why two different stick axes produced
the same numbers.
Stage 02, file pad, single-axis holds (lx=32767 with every other channel exactly
0, trigger held in the same write since the pad state is written whole), 5 s
settles, 8 s dwells, each phase bracketed by HUD-clock screenshots:
min speed (LT) 1 856.9 deg / 8.01 s wall, clock x1.247 -> 185.9 deg/game-s
vs AV_Roll_Min 200
max speed (RT) 1 181.2 deg / 8.02 s wall, clock x1.218 -> 120.9 deg/game-s
vs AV_Roll_Max 125
So roll behaves exactly like pitch: the rate cap falls as speed rises and
_Min/_Max mean "at minimum / at maximum speed". The withdrawn claim that roll
shows NO speed dependence is reversed, and the axis rule is now confirmed on a
second axis instead of contradicted by it.
Both land just under their caps (93% and 97%), the right side for a rate limit.
The shortfall is NOT explained and no claim is made about it: candidates are the
craft not being exactly at min/max speed after 5 s, and the 20 Hz swept-angle sum
undercounting.
The tell that the old result was broken was two conditions agreeing too well. The
tell that this one is sound is that they disagree in the direction the definitions
predict, on two independently bracketed phases.
