1/60 s, and the 60 Hz reading is excluded
ui-keyframe-time-unit.md named its own re-test and nobody had run it: time
300 submitted frames on the IDLE title, where nothing is streaming from
the ISO. Reaching the title is cheap now that one A skips the intro, so
this cost one boot.
Two clean trials: 300 frames in 10.40 s and 10.60 s, i.e. 28.8 and 28.3
fps. That is the same rate as the 27.6 fps measured during the loading
splash, which is exactly the page's own criterion for "the game is 30 Hz
and the unit is 1/60 s". The 60 Hz alternative is now excluded rather
than disfavoured: it needs the emulator at 47% of real time while sitting
idle on a screen the capture says costs 1526 draws over 300 frames, about
five per frame. Nothing there halves an emulator.
So the durations stand as written -- title 4.2 s, main menu 1.1 s, EXTRAS
0.87 s -- and Q1 leaves the handoff's open-residue table. It stays
MEASURED, not decoded: no field on the disc says sixtieths of a second.
One trap, and it nearly cost the conclusion. My first attempt reported
39.5 fps, which sits between the two hypotheses and would have left the
question open. It was a harness bug: I polled the log for a "done" line
rather than for the COUNT of them increasing, so it matched a capture
that had already completed and timed 0.1 s of nothing. METHOD gets the
general form -- a log-polling probe must compare a count, not test for
presence.
closing Q8
Last iteration I named Pj_Silph.xgs as the route to the SE cue index, on
the reasoning that XACT keeps cue->wave there. That route is dead, and
the negative is properly bounded: its 533-byte entry is high entropy with
no XGSF magic, +/-8 KB around it has none either, all 1.08 GB of
sound.pak contains zero XGSF, SDBK and WBND, and the executable has no
XACT or .xgs string anywhere. Control run first -- the same scan finds
RIFF in BGM_001 exactly where the bank structure says it should be, so
the scan works and the magic genuinely is not there.
So the .xgs and .slb extensions came from the authoring tool and survived
into shipped data that is not XACT at all. That goes in METHOD as a
general trap: check for the magic before committing to a parser for the
format an extension advertises. Writing an XACT parser would have been
wasted work.
What that leaves for the SE audio is undecodable-with-reach rather than
pending: Static.slb has no wave boundaries, there is no project file, and
none of the sound table's five records carries an offset. The bank is
certainly the right one -- 8 353 472 bytes over 322 cues is 0.84 to 1.01
seconds each at the bitrates the disc uses elsewhere, exactly the shape
of a bank of short effects. Only the index into it is missing, and it
exists only at runtime.
Q8 closes: vocabulary and bank decoded, the event binding a name match on
the authors' own event names, and the audio explicitly something the port
must source or author rather than extract. With this every MISSION row is
answered.
Two corpus claims died in one boot, and both were costing us.
Q9's last row: a movie IS skippable with a single A. One tap ~45s into
the boot put the title up at ~57s, against a ~193s no-input baseline
measured over three boots, and Canary's own keystroke counter went 3->4
so exactly one press was delivered. The skipped-to title is fully
functional -- it draws the PRESS A plate and a second A opens the main
menu. What actually breaks the boot is hammering: the 88-press run in the
traps doc. The scripts' "tapping breaks the title" comment is too broad
and costs every scripted boot two and a half minutes.
Q4's last row: A on NEW GAME does not hang. It opens DIFFICULTY
(EASY/NORMAL/HARD/BACK, focus on NORMAL), then SELECT DATA, and only then
does the guest throw -- at PC 0x82307128, which is inside sub_823070B0,
the cache-manager STL erase this corpus already documents and which has
nothing to do with the menu path. The screen sat unchanged for 90s
because it was a menu waiting for input from a loop that never pressed
anything. That is now a METHOD line: a screen that never changes is not
necessarily hung, and the fix is to look at it and press something.
Also METHOD: never run ps -ef in this container -- all three long-lived
processes carry the entire loop prompt as argv.
new-game intro has a name
Q9, answered twice over -- once from the disc and once from frames I had
already captured and not used.
The movie manifest's first eight slots are the whole boot-side flow, and
the slot key is the role: LOGO1-4 -> logo1-4.wmv (not on the disc, which
is why the splash is a screen), ADVERTISE_MOVIE -> ADV.wmv, STAFF_ROLL ->
the credits reel, MS00A -> S00A.wmv, MS01A -> S01A.wmv. So the new-game
intro is S00A.wmv, decoded -- which is the half I could not test at
runtime, because A on NEW GAME hangs the emulator.
And there is no separate boot-intro slot: ADV.wmv IS the advertise movie,
the boot just plays it first. Confirmed independently by matching 19
attract frames against five candidates -- 15 hit ADV with a playhead that
advances monotonically at the sampling rate and ends at 137 s, its full
length, with the title back on the next sample. So the attract movie
plays to its end; nothing cuts it short.
That corrects me. Two iterations ago I recorded the attract movie as
"~85 s, so probably not ADV.wmv" -- arithmetic on a start I never
observed, since sampling began 39 s in. REFUTED and METHOD both take it,
along with the matcher's real failure mode: a near-black frame has no
signature, and its runner-up is not evidence.
Skippability I did NOT settle, and the corpus contradicts itself: one
page says A skips a movie every time, while the boot harness deliberately
never taps during one because it breaks the title. Named the one-boot
test rather than picking a side.
not something to concatenate
Q10, and it starts by withdrawing the question's own premise. BGM_001 is
not three sub-waves of 10 KB / 4.47 MB / 4.67 MB: the 10 KB is the bank
header. A bank is exactly TWO waves, and across all 32 BGM banks on the
disc the two always have the SAME duration -- equal to 0.01 s over
lengths from 37 s to 277 s. That alone kills intro+loop and kills two
halves of one piece, both of which require unequal lengths.
Four banks appear to break the rule and do not: BGM_106-109 are the known
leading-region straddle, and the giveaway is that the entry named
BGM_107.slb contains BANK id=1108. The seek packet counts pin each join
exactly, so they realign to the same two-equal-waves shape rather than
being dropped as noise. That trap goes in METHOD.
Then the roles, by decoding both waves to PCM. They are
sample-synchronous: transient-envelope correlation searched over +/-5 s
peaks at lag +0.00 s, and both waves stop at the same millisecond,
167.663 s. Two stems of one performance, meant to sound at once. Wave 1
is quieter, has almost no bass and is far more L/R-decorrelated, which
reads as a surround-rear pair or a second intensity layer -- I cannot
separate those two from the file, and say so: ChannelMask is 0x0002 on
both, and this game's channel metadata is already documented as
meaningless.
Two things the port needs that are NOT on the disc, both marked as
authored: the track is not a seamless loop (BGM_001 fades out and is
followed by 6.15 s of silence, no loop-point field found), and nothing
names which bank the menu plays -- all 32 BGM cues are numeric.
its timing is on the disc
Q7. Every title-side screen carries a full-screen black .prm quad that
paints last, and its keyframe group IS the transition: black at T0, clear
by T1, clear until T2, then back to black on exit. Read with the corpus's
start-of-a-ramp rule and Q1's time unit that gives 0.87s for EXTRAS,
0.97s for the main menu, 4.08s for the title -- from the file, not from a
stopwatch.
The disc-wide check is per-pak all-or-nothing rather than the 41% the
headline count suggests, and GP_TITLE's 6 of 12 is the useful row: the
six builds carrying a fade quad are exactly the six SCREENS, and the six
without are exactly the six overlays. GP_DIALOG is 0 of 133. That is
independent corroboration of the overlay finding from two iterations ago.
One piece is NOT on the disc and says so: the fade-OUT length. The fourth
keyframe has no time slot, because a group's last block stops four bytes
short. Measured instead, at 30fps, ~0.4s and the same both directions.
And a warning I earned: the luminance rise after a transition is NOT the
quad's ramp. The incoming screen's own elements animate in after the quad
has cleared -- 1.47s observed against a declared 0.97s. Time the fade
from where the frame is pure black.
Rig: screenshot samples at 0.5 Hz and cannot see a 0.4s fade at all,
which is why an earlier burst called this an instant cut. ffmpeg x11grab
at 30fps instead; both go in METHOD.
method lines withdrawn
Q5, measured off two boots: up/down move one item and WRAP at both ends
on the 5-item main menu and the 3-item EXTRAS alike; left/right do
nothing; B goes up one level and restores focus to the item you came
from (4/4); B on the main menu returns to the title; B on the title does
nothing. The menu opens on TUTORIAL -- the middle item -- 2/2, though a
third recorded run implies NEW GAME, so that one is reproducible rather
than invariant and says so.
Q4 by driving: LOAD GAME opens the save-slot list, TUTORIAL the lesson
list, OPTIONS the settings menu, EXTRAS build 6, MISSION SELECT the stage
list. NEW GAME is not tested -- A on it hangs the emulator and this
iteration needed the session. The GamePart ID behind each is NOT
measured: it is the entry of the decoded id table whose name matches the
screen I saw, and the page says so rather than wearing the badge.
And the withdrawal. Last iteration I wrote that these menus drop d-pad
presses shorter than ~0.3s. They do not. Once wrap is measured, every
press count I had is exactly right -- four presses moved four steps
THROUGH the bottom, which lands one above where a non-wrapping menu
would. I invented hardware flakiness instead of testing the ends of the
list. METHOD keeps the withdrawal rather than deleting the line.
Also: label brightness is not a cursor oracle here -- the background art
outshines the highlight on some rows. menu_focus.py reads the focus ring
instead, 254 vs <82, no tuning.
Q2. The archive is eight screens shipped twice, English and Japanese --
not the "build 4 title, 5 main menu, 6/8/9 submenus" the handoff claimed.
Build 8 is the JAPANESE main menu; 6 and 9 are the EN and JP EXTRAS, and
EXTRAS is the only submenu GP_TITLE holds. The PRESS (A) BUTTON plate is
its own build (2/3), composited over the title art and faded in a beat
later, not a state of build 4.
Confirmed by booting to the main menu and walking it: title, PRESS (A),
main menu and EXTRAS each match their render element for element. Builds
0/1 and 10/11 -- a DELTASABER / SYLPHEED A.I. plate -- were looked for in
the whole boot filmstrip, every title-side screen and the attract loop,
and appear in none of them; the reach of that negative is written down
rather than filled in with a guess.
Two rig traps went into METHOD: the menus drop d-pad presses shorter than
~0.3 s, and a grab 2.5 s after a transition can catch a screen mid-fade
-- which nearly wrote "the returned title has no plate" into the corpus.
Q1 of the menu port, measured against the running game rather than reasoned
about. The developer-logo splash is the cheap target: it is the first thing the
guest draws and its bundle declares short, unambiguous ramps.
Two results, both frame-exact and both emulator-speed-independent (frame numbers
are VdSwap counts, the guest's own frames):
* the ramp is LINEAR. A declared 15-unit fade lands on round(255*k/15) for all
seven of its samples with zero error, k stepping 2,4,6,8,10,12,14. No ease
can reproduce a constant step of 34 at both ends.
* the animation clock advances 2.000 time units per submitted frame, over six
consecutive intervals with no residual, with 1 unit as the quantum
underneath (one frame in the fade-out advances by 1).
The conversion to seconds is one step further and is flagged as such: 300 frames
took 10.87 s = 27.6 present-frames/second, which reads as a 30 Hz title at 92 %
under the emulator and gives 1 unit = 1/60 s -- the title build 4.2 s, the main
menu build 1.1 s. That reading is not proven, because the rate was measured
while the guest was still streaming from the ISO; the page names the one test
that would settle it and says what changes if it goes the other way.
Committed beside it: the raw draw capture and the per-frame quad CSV, so the
numbers can be re-derived without a disc or an emulator.
The autonomous agent's loop prompt had grown to ~9 000 words of accumulated
findings, refutations and traps. That is a symptom, not a style: it was doing
the job the corpus should do, in the one place that dies with the container.
Three concrete failures followed from it, and each gets a structural fix rather
than a louder instruction.
1. IT REPEATED WORK IT HAD ALREADY DONE.
The "do not revive" list and the method traps existed ONLY in the prompt, so
nothing pointed a fresh iteration at them. Extracted verbatim into two
tracked files:
docs/re/REFUTED.md 105 claims tested and dead, grouped by subject so a
grep for your noun finds the neighbourhood
docs/re/METHOD.md the traps already paid for -- controls, inference,
searching, reading data, runtime
Both are linked from INDEX.md, and the loop prompt now opens by requiring
them to be read. This is the fix for "re-derived something already known":
the knowledge is now where the next iteration looks, not in a context window.
2. IT FORGOT TO ARM THE NEXT WAKEUP.
The prompt tried to solve this by shouting at itself in the first line. The
real fix is to stop asking: `loose` now defaults to a FIXED interval (45m),
so the harness owns the cadence and a forgotten ScheduleWakeup cannot end the
run. SYLPH_LOOP_INTERVAL= (empty) restores self-pacing.
3. IT COULD NOT PUBLISH, SO THE WORK ONLY EXISTED IN THE CONTAINER.
New `push-work`, plus a read-only credentials mount
(SYLPH_GIT_CREDENTIALS, default ~/.sylph-git-credentials). It pushes the
CURRENT branch only, refuses anything that is not auto/*, and never
force-pushes -- so the consolidated line stays a human's decision and a
confused iteration cannot rewrite history. The loop prompt now requires a
push on every iteration that commits, rather than at the end of some longer
arc, which is exactly when a container dies.
The prompt itself drops from ~9 000 words to 85 lines and, more importantly,
stops accumulating: findings go in the corpus, and the prompt points at it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
