Syplheed-Reborn/docs/re/canary-scripted-input-traps.md

# Getting past the title screen in the container — three traps and one blocker

**Status:** ✅ `CONFIRMED` for the three traps (each reproduced, and two of them
fixed in the toolkit). 🔴 **blocked** on reaching the main menu: the guest reads
Ⓐ at the title, and the step *behind* Ⓐ either crashes it or stalls it.

Written down because each of these presents as "the pad is dead" or "the game
ignores input", and each has a completely different cause.

## 1. F10 opens the emulator's menu bar, and that swallows every guest keystroke

F10 is the RE hotkey (ship capture, and now `log_ui_draws`). It is *also* the
toolkit key that opens the application menu bar, and it does both. With that menu
open, `XamState::IsUIActive()` is true, so `XamInputGetKeystrokeEx` returns
`X_ERROR_SUCCESS` with a **zeroed** keystroke before the driver is ever asked
(`xam_input.cc`). The guest polls, gets an empty event, and does nothing —
forever, and with no error anywhere.

This cost most of an iteration. Symptom: a run presses F10 to arm a capture,
then every later Ⓐ does nothing; the title sits there while the pad log happily
prints `[file-pad] keystroke vk=5800 down`. Screenshot
[`captures/title-with-emulator-menu-open.png`](captures/title-with-emulator-menu-open.png)
shows the giveaway — `Open… / Open Recent / Install Content… / Exit` over the
title art. It is easy to miss because the menu is at the far left of the window
and the game is still animating behind it.

**Fix:** after any F10, click once on the game surface to dismiss the menu.
`Escape` does *not* close it. `ui_draw_capture.sh` now does this.

## 2. The pad is fine — the driver was never the problem

Worth stating because the file-pad's own history (`--hid=file`, `GetKeystroke`
implemented specifically so "PRESS Ⓐ BUTTON" would work) makes it the natural
suspect. It delivers: the log shows `vk=5800 down`/`up` per tap, and Ⓐ during a
movie skips the movie, every time. When the title ignores Ⓐ, the pad is not why.

## 3. Ⓐ at the title needs a signed-in profile — and this container cannot type one in

With no profile, Ⓐ **is** handled: the guest calls `XamShowSigninUI` and Xenia
pops its Sign In dialog ([`captures/title-signin-dialog.png`](captures/title-signin-dialog.png)),
`ProfileManager: Found 0 Profiles`. That dialog is the proof the guest reads the
button.

The dialog cannot be completed from here: "Create Profile" opens an **ImGui text
field** for a gamertag, and synthetic X key events do not reach it. Tried, all
with the window focused (`xdotool getwindowfocus` = the game window):
`xdotool type --window`, `xdotool type` via XTEST, single `xdotool key` presses,
clicking the field first. The field stays empty; `Create` with an empty gamertag
is refused. Mouse clicks *do* work (they opened the dialog and the sub-panel), so
it is text entry specifically.

Xenia's own **Profile ▸ Show Profile Menu** panel does have a working `Create
Profile` button, and mouse clicks reach it — but the gamertag it then asks for is
the same ImGui field, so the UI route dead-ends in the same place.

**Fix, landed in Canary** (`auto/re-ui-draw-order`): a `--create_profile_if_none=<gamertag>`
cvar that calls `ProfileManager::CreateProfile(tag, autologin, default_xuid)` at
startup when no profile exists. `default_xuid` is fixed at `B13EBABEBABEBABE`, so
a script can then pass `--logged_profile_slot_0_xuid=B13EBABEBABEBABE` and be
deterministic. Verified: `ProfileManager: RE bootstrap profile 'SylphRE' ->
created`, then on the next boot `Found 1 Profiles` / `Loaded SylphRE (GUID:
B13EBABEBABEBABE) to slot 0`, and the Profiles Menu panel shows the user
([`captures/xenia-profile-panel-signed-in.png`](captures/xenia-profile-panel-signed-in.png)).
The profile persists on disk, so later runs need only
`--logged_profile_slot_0_xuid=B13EBABEBABEBABE`.

## Withdrawn: Ⓐ is not blocked — it works, intermittently

**The main menu has been reached**
([`captures/main-menu-reached.png`](captures/main-menu-reached.png) — NEW GAME /
LOAD GAME / TUTORIAL / OPTIONS / EXTRAS). So the previous version of this entry,
which called the title's Ⓐ a hard blocker, is **withdrawn**. What is true is
narrower and more annoying: **Ⓐ advances the title only sometimes** — one success
in roughly four attempts, with the press verifiably delivered every time
(`[file-pad] keystroke vk=5800 down/up` in the log) and no Xenia UI active.

The successful press landed on the **first** title after boot, before any attract
cycle; the failures were on a title that had come round again. That is a
hypothesis, not a rule — a later attempt on a first title also failed (the screen
flickered to something else for one sample and came back), so timing is involved
and the window has not been pinned down.

## What was eliminated on the way, so nobody re-walks it

* **`IsUIActive()` is now observable.** `XamInputGetKeystrokeEx` returns
  `X_ERROR_SUCCESS` with a zeroed keystroke *before consulting any driver* when a
  Xenia dialog is up — an invisible input blackout. Canary now logs
  `[RE-INPUT] XamInputGetKeystrokeEx swallowed by IsUIActive (dialogs=N …)` when
  that happens. On the runs where Ⓐ failed, **it never fires**, so the blackout
  is not the cause there. (It *is* the cause after F10 — trap 1 above.)
* **The driver filter is fine.** The game polls with `flags = 3`, and
  `InputSystem::FilterDrivers` keeps a driver when `flags & InputType` is
  non-zero; the file pad reports `Controller = 1`, so it is selected.
* **The game does not query sign-in on the press.** Tracing every `Xam*` call
  around a press shows only `XamInputGetCapabilities`, `XamInputGetKeystrokeEx`
  and `XamInputGetState` — no content, user or signin call at all.

### Two traps in the measuring rig itself, which cost more than the bug

* **A FIFO trace consumer that exits stalls the emulator.** `--phase_a_event_log_path`
  writes 1.5 GB a minute, so it was pointed at a named pipe with a `grep` on the
  other end. When that reader goes away, the emulator blocks on the write — and
  the symptom is *exactly* "the pad is dead": the guest stops polling, the driver
  never refreshes, nothing is logged. Two runs' worth of "the driver never
  reacts" was this, not the game.
* **The trace's `return_value` is a placeholder.** `phase_a_bridge::EmitReturn`
  is called as `EmitReturn(name, 0)` — literally zero — so every `kernel.return`
  event reads `"status": "0x00000000"`. "Every keystroke call returns SUCCESS"
  looked like hard evidence for the `IsUIActive` theory and means nothing. The
  theory had to be tested with a real log line instead.

## The scripted reproduction was tried, and it failed

"Tap Ⓐ once per second and see whether the success rate goes to 1" was the next
step this entry named. It was run (`tools/re-capture/menu_draw_capture.sh`), and
the answer is **no**:

| run | what was pressed | result |
|---|---|---|
| E | **one** Ⓐ on the first title after boot | **main menu** |
| F | **40** × Ⓐ at 1/s on the title, then one each of START, B, BACK, X, Y | title, unchanged |
| G | Ⓐ every 4 s through the whole boot (88 presses) | permanent **black screen**, no crash, never recovers |

In run F every press was delivered — the driver logs `keystroke vk=5800 down/up`
for each — and the new `[RE-INPUT]` line never fired, so nothing was swallowed.
The guest received them and ignored them. **No button does anything** on that
title: START, B, BACK, X and Y are as inert as Ⓐ
([`captures/title-unresponsive-attract.png`](captures/title-unresponsive-attract.png)).

Run G is worth its own warning: hammering Ⓐ through the boot is not merely
useless, it **breaks the run** — 88 presses left a black screen that never came
back (no crash, no throw, the emulator healthy). The script no longer taps
during boot; the intro takes ~3.5 minutes and gets to the title by itself.

**So the difference is not the number of presses or the button — it is which
title you are looking at**, and that is now measured rather than guessed:

* the title that **ends the boot sequence** accepts a single Ⓐ and opens the main
  menu — **2 of 2**, in independent runs, one of which never pressed F10;
* the title the **attract loop returns to** accepts nothing — Ⓐ, START, B, BACK,
  X, Y, dozens of presses, every one delivered, none swallowed.

**The recipe, then:** launch, wait for the first `title` classification, tap Ⓐ
once. Do not tap during the boot, and do not wait for a second title.

The tell is *not* visible in what the game draws — a `log_ui_draws` capture in
each state gives 13 quads at identical rects, `ptbtn00` (the `PRESS Ⓐ BUTTON`
plate) included in both. See
[`ui-title-paint-order-capture.md`](ui-title-paint-order-capture.md).

## Still open

**Why** the attract title stops accepting input, given that it draws exactly the
same thing. Nothing in the composition, the input path or the sign-in state
differs; the difference is in the guest's own state machine, and reading it means
reading that code.

Not open any more, and worth stating because it was the thing blocking the RE:
reaching the main menu is now routine (first title, one Ⓐ), and the second
screen's paint order has been captured with it.

## 2026-08-19 — the "first title accepts Ⓐ" rule is weaker than stated, and there is a confound

The entry above says the boot title accepts a single Ⓐ, 2 of 2. Continuing to
use that recipe, it failed four times running. The full record, every run with
the press verifiably delivered:

| run | `--log_ui_draws` | title appeared at | Ⓐ |
|---|---|---|---|
| crash-dir | off | ~83 s | **menu** |
| boottitle | off | 147 s | **menu** |
| A/B "off" | off | — | **menu** |
| menucap 1 | on | 292 s | no (40 taps) |
| menucap 2 | on | 177 s | no |
| optcap 1 | on | 241 s | no |
| optcap 2 | on | 219 s | no |
| A/B "on" 1 | on | never (black screen) | — |
| A/B "on" 2 | on | 186 s | no |

**3 of 3 without the flag, 0 of 5 with it.** That is a strong correlation, and it
points at *my own instrumentation cvar* — which would be a serious finding, since
`--log_ui_draws` is what captures the paint order in the first place.

**It is also completely confounded, and the table shows it.** Every success had
its title inside 147 s; every failure had it at 177 s or later. Flag and
boot-time are perfectly correlated across these nine runs, so this evidence
cannot separate "the capture cvar breaks input" from "a title that arrives late
is already in the attract state and does not accept input". Both stories fit all
nine rows.

**A mechanism is hard to see for the flag**: `log_ui_draws` is read only when F10
arms a capture; the per-draw hook is one relaxed atomic load, and the swap hook
another. Nothing there should reach the guest. That argues for the boot-time
reading — but "I cannot see how" is not evidence, and the correlation is what was
measured.

**What would separate them**, cheaply and next: run the flag ON several times and
record (boot time → outcome). A single ON run whose title arrives inside 147 s
and which then accepts Ⓐ exonerates the flag outright.

### A defect I introduced, recorded rather than left to bite

Widening the menu signature (previous commit) made `screen_id.py` classify some
**boot/attract frames** as `menu` — twice in one run, at t=54 s and t=146 s, long
before any menu exists. The menu and a dark-blue movie frame are not separable
from a single grab. Scripts that navigate on this must require the classification
to hold across two grabs a second apart; the classifier itself cannot fix it.

### The confound was broken, and it did not go the way the table suggested

An **interleaved** series (same script, arms alternating, so cache warming cannot
masquerade as either variable) settles the boot-time question and leaves the
other one open:

| arm | title at | Ⓐ |
|---|---|---|
| `--log_ui_draws` on | 252 s | stuck |
| off | **268 s** | **menu** |
| on | 254 s | stuck |
| off | 232 s | stuck |

**Boot time is refuted.** The *latest* title of every run recorded — 268 s —
accepted Ⓐ, and a 232 s title refused. Whatever gates the button, it is not "the
title arrived late".

**The flag still correlates and still has no mechanism.** Over all twelve runs it
is 0 of 7 with the flag and 4 of 5 without. Against that:

* `log_ui_draws` is read in exactly one place — when F10 arms a capture — and
  **F10 was never pressed** in any of those runs;
* the per-draw hook is one relaxed atomic load, the swap hook another;
* the two arms' startup config dumps are **byte-identical** (246 settings, zero
  differences).

A correlation with no mechanism, and an arm that failed once, is not a finding.
It is a variable to remove, which is what was done: **F10 now arms the UI capture
unconditionally**, like the ship capture beside it, so no run needs the flag at
launch. Verified by artifact — F10 with no capture flags writes the log.

### A third failure mode, recorded because it is now frequent

Three boots have ended on a **permanent black screen**: one after 88 scripted Ⓐ
presses, and **two with no input at all**. No crash, no guest throw, the emulator
healthy and still resolving cache paths. It is not caused by the pad, and it is
not the cache-flush crash. Roughly one boot in five in this session.

## Still open, restated honestly

What gates Ⓐ at the title. Four candidate explanations have now been eliminated
or refuted — Xenia UI swallowing the keystroke, the driver filter, a sign-in or
content call on the press, and the age of the title — and the fifth (the capture
flag) has a strong correlation and no possible mechanism. The next honest step is
not another guess from outside: it is the guest's own state machine, and that
means reading the title code in `sylpheed.db`.

### 2026-08-19 (later) — the flag hypothesis loses its own test

With the capture cvar **removed from the launch line entirely** (F10 arms
unconditionally now), a fresh navigation run reached the boot title and Ⓐ **did
nothing**. So the flag is not necessary for the failure, and the correlation —
0 of 7 with it, 4 of 6 without it — does not survive as an explanation.

What is left is the plain reading, and it is worth stating as the conclusion
rather than as a stepping stone: **Ⓐ at the title succeeds about half the time,
and nothing measurable from outside predicts which.** Eliminated so far: Xenia UI
swallowing the keystroke (diagnostic never fires), the driver filter (flags 3 vs
`Controller = 1`), a sign-in or content call on the press (none is made), the age
of the title (the latest title of all accepted; an earlier one refused), and now
the capture cvar.

## The input path, mapped statically

Since the outside is exhausted, the guest side was traced in `sylpheed.db`:

```
entry_point 824AB748
  └ sub_8216EA68   (968 B)   main loop
      └ sub_822F1AA8 (996 B) per-frame input update
          └ sub_82457038 (628 B)  THE PAD POLL
              └ sub_824AA870 → XamInputGetKeystrokeEx   (flags = 3)
```

`XamInputGetKeystrokeEx` has exactly **one** caller in the whole title
(`sub_824AA870`, a wrapper that maps user index `0xFF` to 0 and ORs in
`0x4000_0000` = ANY_USER), and that has exactly one caller, the poller. The
poller's shape is readable and matches the runtime trace:

* `+0` flags word — bit 31 "disabled", bit 30 "copy current→previous", bit 3
  "also poll device state";
* a **keystroke queue** at `+68` with a count at `+72`: it drains
  `GetKeystrokeEx` with `flags = 3` into 8-byte slots (the same `flags = 3` the
  phase-A trace recorded, so this is the code the trace was watching);
* the current pad state at `+36`, the previous at `+52`, compared field by field
  at the end (buttons `+40/+56`, triggers `+42/+43`, sticks `+44…+50`) to return
  "changed" (3) or "unchanged" (0), and 2 if the device vanished.

**Nothing in that path is state-gated** — it polls unconditionally and reports
changes. Whatever ignores Ⓐ at an attract title is a *consumer* further up, and
finding it means identifying the object the poller fills (passed in as `r3` from
the per-frame update) and then its readers. That is a real RE job, not a
one-iteration probe, and it is where this thread now stands.