f4561600c5
Fourth attempt at the witness, and it passes the check the previous three failed. Searching the whole 32 MB region rather than a 4 MB window gives 6500 candidates and 32 witnesses in a clean 21/s cluster matching the measured frame rate, and the flags have zero contradictions with the loss data: the single loss falls in an unflagged sample and every flagged sample has none. The guest genuinely froze at about 45 s and the instrument says so. That leaves the freeze itself as the dominant problem. Onset across runs is 27, 45, 83, 183 and 255 seconds, median around 83, so the usable window is one to four minutes and unpredictable. This run produced exactly one loss and is useless for the arrival question even though the instrument finally works. Fifteen runs have now gone into that question without an answer, largely for this reason. Worth being honest about the probe: "cheap" was never that cheap and the witness made it worse. It still reads 32 MB to enumerate at startup and another 32 MB every 90 s to rescan, and the full-region calibration added two more 32 MB reads. The 45 s freeze came immediately after that calibration. Calibration now samples eight spread windows of 512 KB -- 4 MB total, still covering the whole span -- instead of reading everything twice, and the rescan interval is doubled to 180 s. Not yet run. Also this iteration: the 42-record anomaly recurred, the discard rule correctly refused to interpret the run, and a rescan-until-baseline retry is now in place so the next occurrence shows whether the count climbs toward 116 or sits at 42.
Reverse-engineering knowledge base
This directory is the spec-side of the clean-room: it records what the original Project Sylpheed binary does (behaviour) and how its data is laid out, so that the Rust port can be implemented from these specs without re-deriving anything and without ever copying original code.
It exists to answer one question fast: "do we already know how X works, and how sure are we?"
The one rule that matters
Never document a claim more confidently than the evidence supports, and never paste original code here.
A wrong-but-confident note is worse than no note: someone builds on it and the bug hides for weeks. Every entry therefore carries an explicit confidence and its evidence. This mirrors the project method — measure the oracle, never infer; refute before believing.
Clean-room firewall
- ✅ Allowed: behaviour descriptions, field offsets/types, formulas, state machines,
observed input→output pairs, and references to the original by address
(
sub_821B68C0) or toxenia-rs/sylpheed.db. - ❌ Forbidden here and in
crates/: pasted decompiled C/C++ or verbatim disassembled function bodies presented as the thing to reimplement. Cite the address; describe the behaviour in your own words. Disassembly is a tool for understanding, not a source to copy.
Confidence levels
| Level | Meaning | Bar to reach it |
|---|---|---|
CONFIRMED |
Behaviour verified against ground truth. | ≥2 independent observations or one observation cross-checked against an oracle (canary framebuffer, a known-correct value, a second code path). |
PROBABLE |
Strong single-source inference. | One clean observation, or an unambiguous static read of the disassembly. |
HYPOTHESIS |
Educated guess, not yet tested. | Anything else. Must say what would confirm/refute it. |
Promotion requires new evidence, not re-reading the old evidence. A HYPOTHESIS that
"looks right again" is still a HYPOTHESIS. Only an independent check promotes it.
If evidence later contradicts an entry, demote it and record the contradiction — do
not silently edit the conclusion.
When to document
- Right after a function/structure crosses from
HYPOTHESISto at leastPROBABLE— before moving to the next code path, so the knowledge isn't lost or re-derived. - Whenever confidence changes (up or down) — append to the Evidence log, don't overwrite.
- Not while it's still a pure guess with no evidence — a one-liner in the relevant backlog/plan is enough until there's something to stand on.
What to document
- Functions/code paths →
docs/re/functions/<name>.md(one file per function or tight cluster). - Data structures / formats →
docs/re/structures/<name>.md. - Keep the index in
INDEX.md(one line each: name · confidence · one-line summary).
Use the templates: _TEMPLATE.function.md,
_TEMPLATE.structure.md.
How we find and confirm code paths (the toolchain)
Everything joins on the guest virtual address (PC) — code addresses are fixed by the XEX load, identical across our emulator and canary.
- Static (cheap, try first):
xenia-rs/sylpheed.db(DuckDB: 25 481 functions, xrefs, strings, vtables, imports). Query withxenia-rs/zq.py—zq.py grep <str>,zq.py xref <addr>,zq.py dis <lo> <hi>,zq.py fn <pc>. Entry points are usually a string (zq.py grep MSG_DEMO) or an import (movie/XMA API) xref'd back to the loader. - Dynamic (when static is ambiguous): run
xenia-rswith its probe suite —--pc-probe/--audit-pc-probe-hex(fires at block entry),--mem-watch(mid-block reads/writes of a VA),--lr-trace(call/return chains),--trace-instructions,--dump-addr(read guest memory). These already exist; prefer them over hacking canary. - Oracle (correctness ground truth): canary — the Wine cross-build
xenia-canary/build-cross/bin/Windows/Debug/xenia_canary.exe(the native Linux ELF crashes / does not run — do not use it). This is the only emulator that reaches the in-game menu; ourxenia-rsnever got past the intro video. Use canary to observe output (capture its framebuffer for texture colours), not usually to instrument code — though itsbuild-crosstoolchain does compile, so small C++ probes + rebuild are possible when needed. Run muted, one emulator process at a time, point it at the real ISO (not the symlink).
⚠️ VA-equality caveat: join code by PC (fixed), but never assume a data VA holds the same bytes across emulators — allocators differ. Compare data by content/layout.